Heavy duty lathe

POREBA TCF-200 CNC LATHE

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Hsdpfxotyyn Hj Ah Uog

Condition: new, Experience unparalleled precision and performance with the surface grinding machines from PERFECT. Now even supported by BAFA! Our machines offer grinding lengths from 500mm to 4000mm and grinding widths from 150-1000mm available, also available as controlled variants. Partially available from stock! Discover our extensive range of special accessories that make your surface grinding machine even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results for you. Trust in our many years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines (further models available on request): Model FSM 2550 FSM 3060 FSM 4080 Grinding Length 500 mm 600 mm 800 mm Grinding Width 250 mm 300 mm 400 mm Distance Table Surface/Spindle Center 500 (Option 600) mm 500 (Option 600) mm 550 (Option 650) mm Table Size 250×500 mm 300×600 mm 400×800 mm Max. Table Load 250 kg 300 kg 400 kg Model FS-NC-50AHR FS-NC-60AHR FS-NC-70AHR Grinding Length 1020/1520/2020 mm Grinding Width 500 mm 600 mm 700 mm Distance Spindle Center to Table 600 (Option 800, 1000) mm Table Clamping Surface 500×1000/500×1500/500×2000 mm 600×1000/600×1500/600×2000 mm 700×1000/700×1500/700×2000 mm Table Load 800/1000/1000 kg 1200/1400/1400 kg 1500/1700/1700 kg Hodjdzk T Rjpfx Ah Ueg ACCESSORIES: Grinding wheel, Grinding wheel flange, Grinding wheel dresser, Grinding wheel puller, Assembly elements, Machine tool, Balancing mandrel, Machine light, Hydraulic unit with cooling fan, Technical documentation in German, CE design CURRENT STOCK MACHINES (see pictures): New machines with grinding area 250x500mm, 300x600mm, 400x800mm, 700 x 1520mm Overhauled machines with grinding area 250x500mm, 300x600mm, 400x800mm Furthermore, we have access to various used machines with large grinding areas. Contact us! For more technical data, description, and accessories, please refer to the PDF file below. By the way, in addition to inexpensive new machines and tested used ones, you can expect even more from us: • Consultation and solutions at your location • Organization of the transport of your machine to your factory • Installation, assembly, commissioning, and ready-to-use handover, and more.

Condition: new, 900 mm Hedpfxefg E Hps Ah Usg 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Hedpsvz A Rijfx Ah Ueg Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: Hedpfx Asuuz Iish Uog - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm Condition: Very good (used) Optionally with machine bed About us: Hodpfx Asfr Ih Djh Usg MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: used, Year of construction: 2009, turning height: 3,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 3,200 mm, faceplate diameter: 2,950 mm, workpiece diameter (max.): 3,300 mm, SCHIESS VERTICAL LATHE CNC FAGOR 8070 (C-AXIS + POWERED TOOL) TECHNICAL SPECIFICATIONS Brand: Schiess Model: TVMF 320-3000 Year: 2009 Max. turning diameter: 3200 mm Hedpfx Ahoxh Hmks Ujg Max. turning height: 3500 mm Load capacity: 20 t C-axis (0.001°) CNC: Fagor 8070 (70 kW) Chuck diameter: 2950 mm Distance between columns: 3300 mm Angular milling head PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: used, Year of construction: 2022, sheet width:1550 mm Hedpfet Hmlqsx Ah Ueg plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Hedpfx Aotqtk Ajh Uog Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Condition: ready for operation (used), Distance between centers: 4000 mm Center height: – over bed 650 mm – in bridge area: 800 mm Swing diameter: – over bed 1200 mm – over cross slide 1000 mm – in bridge area 1600 mm Platform: 1200 mm Bore diameter: 140 mm Speed: 2–800 rpm Bed: – bed width 650 mm – longitudinal slide length 820 mm – total cross slide travel: 600 mm – upper slide travel: 300 mm GIVI 3-axis digital readout Electric motor 28.5 kW Dimensions: 6325 x 1400 mm Hodpexq E D Tefx Ah Ueg