Caterpillar multi-saw

Raimann K-23 250/120

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Dkjdpst Tqy Ejfx Ag Toi Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2013, operating hours: 4,131 h, Equipment: all wheel drive, * Driver's suspension seat Dkedperbcw Aofx Ag Tei * Exhaust behind the driver's cab * Maneuvering jaw ----Construction: ROPS driver's cab heated, rear window heating, Komatsu 4-cylinder diesel engine, 50 KW, 20 km/h, articulated steering, hydrostatic drive, hydraulic quick-change system, 2 additional hydraulic connections, max. dumping height: approx. 2,420 mm. Accessories: 1m³ bucket/weight: 422kg, pallet fork with 2,500kg load capacity. Only sold to businesses. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: excellent (used), functionality: fully functional, Cosmec SM100 Multi-Blade Saw Track width: 240 mm Cutting height: 100 mm Maximum saw blade diameter: 300 mm Blade bore: 60 mm Anti-kickback pawls Feed speed adjustable via variator Dedoyngw Rspfx Ag Toki Main motor power: 11 kW

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Dkjdpfoyaq Hgsx Ag Tji Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers Dedpfjxvb Sdex Ag Toki - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)