REHM ACDC Tig Welding Machine

REHM Invertig 260 ACDC

Condition: used, functionality: fully functional, machine/vehicle number: 127814, protection type (IP code): IP23, Equipment: type plate available, The machine on offer is a used Rehm Invertig 260 AC/DC. The machine is in perfect technical condition and is fully functional. Unfortunately, there are signs of wear and tear visually. All switches and the digital display work and the machine welds perfectly. The Invertig 260 AC/DC is in our warehouse ready for welding. Test welding is possible at any time, but it is best to arrange an appointment with us beforehand. With the Invertig 260 AC/DC you can weld TIG and electrodes. The machine combines professional welding with the simplest operation. The welding parameters can be individually set using the digital display. 3 languages (German, English and French) are already stored on the machine. Iedpfx Adov H Afwjisa The Invertig 260 AC/DC from Rehm offers a welding current range of 5-260 A with a high duty cycle. The individual welding current ranges and duty cycles for TIG or electrode welding can be found on the type plate. Optimal seam formation thanks to selectable current rise time/current fall time, gas pre-flow and gas post-flow time and starting current/end crater current. Narrower seam surface thanks to direct current pulses up to 500 Hz. Automatic saving of the last device setting via the digital display The scope of delivery includes a used water-cooled 8m TIG torch TIGZONE CS310A.

Condition: new, Year of construction: 2025, OSTAS PRE-MACHINERY TYPE KM 1,2 - Capacity 1,2 mm - Unloading 250 mm - With 8 sets of rolls CALL FOR MORE INFO Isdpsgg Nrkofx Adioa DUTCHMACH Metalworking machines ENSCHEDE

Condition: good (used), Year of construction: 2007, machine/vehicle number: 193568, Offer 24606 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED Iodpfovt Twqsx Adisa - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 28 mm bore capacity in steel perm. 24 mm spindle taper ISO 40 DIN 2080 Shank diameter 32 mm quill stroke 115 mm x-travel 500 mm y-travel 250 mm z-travel 541 mm turning speed range - spindle 115 - 3.100 U/min transmission ratio 3 transmission ratio 1 115 - 600 U/min transmission ratio 2 270 - 1.400 U/min transmission ratio 3 590 - 3.100 U/min motor 2,2 kW table surface area 850 x 240 mm T-slot - width 18 mm T-slot - distance 80 mm weight of the machine ca. 480 kg dimensions of the machine ca. 1,4 x 1,1 x 2,5 m Ijdpfxjxgu Ims Adioa Drilling and Milling M/C OPTIMUM - OPTImill BF 46 Vario - incl. OPTIMUM base cabinet

Condition: new, plate thickness 0,8 mm throat 180 mm roll diameter mm Ijdpfx Adeht R Hmsioa weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, Optimum OPTIdrill DH 40CT column gear drilling machine with cross table 3034349 The versatile machines for milling and drilling. TECHNICAL DATA General information Tightening rod M 16 Dimensions and weights Isdpfx Ast N Rkpodiea Column diameter 115mm Length (product) approx. 1060mm Width/depth (product) approx. 745mm Height (product) approx. 2090mm Weight (net) approx. 370kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 End mill size max. 25mm Cutter head size max. 76mm Drilling table Drilling table work surface length 730mm Drilling table work surface width 210mm Drilling table T-slot size 14mm Drilling table T-slots quantity 3 Drilling table T-slot spacing 63mm Load capacity drilling table 50kg Distance spindle - drilling table max.600mm Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 495mm Machine foot working surface width 375mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 230mm Machine foot length 670mm Machine foot width 470mm Spindle Quill stroke 120mm quill diameter 75mm Spindle holder MK 4 throat 280mm Drill head rotation 360 Drill head inclination 45° Manual quill feed Drill head height adjustment 260mm Travel distance Manual X-axis travel 480mm Manual Y-axis travel 180mm Manual Z-axis travel 560mm SCOPE OF DELIVERY Sprocket chuck 1 - 13 mm / B 16 T-nuts Adapter MK 4-MK 3 Arbor MK 4 / B16 Operating tool

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Isdpfxexddams Adija

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: Isdpfxspxmaus Adioa - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195311, Offer 24601 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable Iedpfsvt Trzox Adiea - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: used, Year of construction: 2008, pressure 90.0 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 200 ltr. Number of working hours ca. 47.100 h total power requirement 7.5 kW weight of the machine ca. 7500 kg. range L-W-H 4250 x 1800 x 2450 mm good condition - with 1x set of new bending tools (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - ?v=Xlb8EgQ8088 Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * with 4x manually adjustable stop fingers - CNC electro-motorized height adjustment of the back stop (R axis) - manually adjustable table crowning * including analogue value display * including hand crank for adjustment - AMADA upper tool Quick-change clamping * including crowning device in the tool holder - AMADA die adapter rail, bottom - 2x front, movable support arms ("sliding" system) - side protective device (swinging doors) - rear protective device (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF) Special accessories included: - 1x NEW split set of upper tools (4x 835 mm) * Angle 85° / Radius R 0.8 mm / Height 66.5 mm - 1x NEW split set of lower tools (4x 835 mm) * V openings: 16/22/35/50 mm Isdpfx Adexacdcjioa * Height 60.0 mm / Angle 85° / Material=C45