Stationary extraction system

RIEDEX BV MD-280

Condition: new, Year of construction: 2026, Sawdust extraction HOLZING RLA S 300 8900 m3h extraction capacity ~ 8900 m3/h engine power 7.5 kW rotational speed 3000 rpm rated voltage 400 V, 50 Hz extraction port 300/200 mm extraction speed 28 m/sec. Number of filters 45 G filter category Polyester filter material Sound level 80 dB without connection / 65 dB when connected through the pipe to the machine Filter area 22 m2 Overall dimensions (length x width x height) 2260/920/2140 mm Weight 274 kg Bwedpfxelkd Sps Ab Det The suction fans are located in the vacuum cabin on the clean side of the air in special sound-absorbing cabins. They have a special blade design, which makes them more efficient and effective and also contributes to electricity savings.

Condition: new, Year of construction: 2026, Extraction capacity approx. 5200 m3/h Motor power 3.0 kW Rotational speed 3000 rpm Rated voltage 400 V, 50 Hz Extraction port 250/200 mm Extraction speed 28 m/sec. Number of filters 28 Negative pressure 2800Pa Filter category G Polyester filter material Sound level 80 dB without connection / 65 dB when connected through The pipe to the machine Filtration area 13.7 m2 Dimensions (L x W x H) 2000 x 750 x 1980 mm Bsdpfxjlkd Sds Ab Djwt Weight 182 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Extinguishing device: yes Bwodopfat Tspfx Ab Djt Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: used, Year of construction: 1999, Cast iron frame Heavy machine Bwedpfjxxti Hjx Ab Det 800mm steering wheels Parallel guide Table extension at the machine outlet 4kw motor 380V New flywheel bearings

Condition: new, Year of construction: 2026, HOLZ-HER Edgebanding Machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - LED machine lighting - Edge trimming - Edge feeder - LR101 glue application system - glue application roller (Teflon-coated) - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Face scraper - Buffing unit 12 months warranty Delivery time upon request. Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. Bwsdpfx Aozhaw Ajb Djt In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 18052, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, volume flow: 5,800 m³/h, intake vacuum (max.): 38 mbar, suction capacity: 5,800 m³/h, intake manifold diameter: 300 mm, overall weight: 830 kg, Equipment: CE marking, Well-maintained, fully functional dust collector, for sale on behalf of a customer. Location: near Karlstadt. Bjdpfjzd Uixjx Ab Djwt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3460x1000x2400 mm Number of filters 73 St. Bwjdpfx Aow Nblreb Det Number of dust containers 4 St. Weight 410 kg 355 mm 520 mm

Condition: new, 3 waste bags capacity 8000 m3/h Bwodpfx Abjzqa Tis Djt motor power 7.5 kW bag shaking mechanism air return channel power supply 380V

Condition: new, Year of construction: 2026, Capacity: 11,000 m³/h Motor power: 11 kW Voltage: 3-phase / 380 V Net/gross weight: 1000 / 1100 kg Dimensions (L x W x H): 3661 x 1160 x 3063 mm Material: Galvanized steel sheet, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 40 L/min Minimum required pressure: 1 bar Bedpfx Abjzx A Ryo Dswt Sound power level: 65 - 75 dB(A) Vacuum: 2800 - 3100 Pa Filtration area: 60 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted to work in environments Explosive dust in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient operation in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: new, Year of construction: 2026, 0,4-8 mm Workingpiece thickness from to 8-60 mm Total length 4930 mm Feed speed 10 m/min. Bedpfxezu A R Ss Ab Djwt Weight 1500 kg