Fans Rippert B 400/1A

Rippert B 400/1A

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Ljdovvkd Tjpfx Al Neac Storage location: Nattheim

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Laodpfx Aohlp Efjl Noc

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Laedpovllxdjfx Al Njc Weight: ca kg The radiator has been technically inspected, fully functional

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Lodpfxjg A Hc Hj Al Noac

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Ljdpfxopu R Ncj Al Noac Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Lodpfsinur Aox Al Neac Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: new, Year of construction: 2025, TPO0909E powder coating oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Rod for hanging details * Convection (Equal temperatures throughout the oven), * Locks for safe opening and closing, * Maximum operating temperature: 230°C. TQ0906 powder coating booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1,6kW * Air capacity: 3200m3/h, * Hermetic lamp: 1pcs. * Automatic filter cleaning system * The cabin is equipped with a set of pneumatic quick connectors * Cartridge filter: 1 pcs * Paint recovery container Laodpfx Asfgnytel Noc Oven, cabin in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions. Please do not hesitate to contact us.

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm Lodpfsiu Smbox Al Neac casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: new, Year of construction: 2025, Efficient refrigeration systems with R290 – air-cooled, reliable, and environmentally friendly. Our models cover a power range from 20 to 800 kW and offer flexible options with or without free cooling. Advantages: Environmentally friendly refrigerant R290 with low global warming potential Air-cooled, internal pump, and tank Options: with free cooling, utilizing outside air for additional cooling, which reduces electricity consumption, especially during cooler months Scalability from 20 to 800 kW to suit your requirements State-of-the-art control system Customized consulting, planning, and dimensioning Delivery time depends on the model and equipment Sustainable operation through low CO2 emissions and reduced operating costs Lajdpfjfqllwex Al Noc We will gladly advise you on which version is best suited to your requirements.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min Ljdpfsfm T Hbex Al Noac total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.