Suction unit

Robland DC1

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Filter cleaning: manual Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Knedpewhuufofx Abvec Weight: 39 kg

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 Knsdpfx Abepgkmwevsc T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: PIDXH320KOMA70990, universal excavator in excellent condition Kjdjyint Njpfx Abvsnc

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Kjdpfx Aovadxlsbvonc Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Knedpfx Aoynhwfsbvsc Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: new, Year of construction: 2026, Holzkraft panel saw with scoring saw Compact panel saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence The cutting plane of the compact panel saw is directly on the sliding table Kodpfx Absih Dwvovjnc Precision-guided aluminum crosscut fence, anodized as standard Large table extension guided on a telescoping arm and adjustable in length The standard table widening and extension allow for easy work with larger workpieces The large-sized saw unit made of gray cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running, and a long service life Large work table made of ground gray cast iron, making it extremely robust and durable Smooth operation and precise cuts Aluminum crosscut fence Equipped with a tried and tested ball bearing system Dust and dirt resistant due to minimal contact point between the ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guide rails Telescoping fence Extendable aluminum telescoping fence Angle adjustable With two professional folding fences Ek2a0i2ik Parallel fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model SC 2 classic Item No. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Fence length 1660 mm Cutting height max. 90° with scoring saw 100 mm Cutting height max. 45° with scoring saw 79 mm Rip width max. to the left of the saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Saw blade diameter max. with scoring saw 315 mm Saw blade diameter max. without scoring saw 315 mm Scoring saw blade diameter (optional) 80 mm Main saw blade speed 4000 min-1 Scoring saw blade speed 7600 min-1 Electrical connection 400 V / 50 Hz Motor power 4.0 kW Dust extraction nozzle diameter 120 mm Dust extraction nozzle diameter saw blade guard 60 mm Weight 295 kg Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Suction nozzle diameter: 150 mm Knsdpfx Asknyhhsbvoc Volume flow rate: 3000 m³/h Negative pressure: 3500 Pa Air velocity: 47 m/s Chip collection bag volume: 2 x 0.1426 m³ Filter area: 5 m² Filter cleaning: manual Motor power: 1.5 kW Dimensions: Weight:

Condition: used, Year of construction: 2021, operating hours: 4,119 h, functionality: fully functional, machine/vehicle number: 7187, overall weight: 20,000 kg, year of last overhaul: 2026, fuel type: diesel, We are offering this used Lindner crusher, model Urraco 75D, manufactured in 2020, for sale. The installed grinding unit has been completely refurbished. An additional grinding unit (unrefurbished) is included in the price. Kjdpfx Aszc Izmobvenc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, axle configuration: 3 axles, first registration: 10/2008, color: other, Equipment: ABS, = Additional options and accessories = - Air suspension - Steering axle = Remarks = Broshuis, 2008, Knjdpfx Abezn Arievoc SAF axles, As 3 sent, Extendable = More information = Year of construction: 2008 Rear axle 1: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 1 km, first registration: 01/2001, fuel type: diesel, fuel: diesel, gearing type: mechanical, Year of construction: 2001, Interior: black Number of keys: 1 Knjdpsynlzbofx Abvec