Press Brake Tooling

ROLLERI Oberwerkzeug P115.88.R06

Condition: used, material width:304,8 mm Bodscxxrxopfx Adhelp material thickness:0,12 - 2,2 mm feed length:304,8 mm clamping force of fastening pincer:850 N clamping force of moving pincer:4410 N feeding force:650 N weight of the machine ca.:0,15 t dimensions of the machine ca.:0,7 x 1,05 x 0,6 m

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Bljdpfx Ajv Di Dnsdhjp Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: excellent (used), Year of construction: 2011, Immaculate Fanuc packaging robot with controller which has come from a factory which closed a few years ago. The nicest robot we have had for a long time, very well looked after. Bedpfxehn Szqs Adholp

Condition: as good as new (ex-display), High-definition HD generator for plasma cutting. Bjdpjg Tcufsfx Adhjlp From warehouse stock. Available for immediate delivery, subject to prior sale. A great opportunity.

Condition: good (used), functionality: fully functional, Year of construction: 2019, LiftMaster 1530 loading and unloading system for sale due to lack of use. Bjdpfx Adozdiwmohjlp It was previously used with an L20 CO2 laser.

Condition: new, functionality: fully functional, Year of construction: 2025, BODOR Laser Cutting Machine Model: P3015-12000W with 12 kW BODOR Laser Source Equipped with a shuttle table, programmable via CNC control system Configuration: - 12 kW BODOR Laser Source - Bodor Genius Laser Cutting Head - Bodor Thinker Control System - 21.5-inch monitor with touch function - Insert and dovetail plate welded segment bed - Bodor servo motor and driver - SMC oxygen regulating valve from Japan - Parker nitrogen regulating valve from America - Automatic nozzle changer (8 stations), nozzle cleaning, and calibration automatic - One-click processing - Bodor Lightning Perforation Technology - Automatic adjustment of cutting gas pressure (O2) - Protection when the door is open - Alarm function for cutting errors - Autofocus of the laser head Blodpezd Eqgefx Adhjp - Expert database for laser cutting technology - Ergonomic remote control (Bodor Mango®) - Active anti-collision function - Intelligent maintenance reminder - WIFI internet connection - Bodor Cloud service - Water chiller - Stabilizing transformer - CE conformity Technical Data: Length with panel: 9,950 mm Width: 3,050 mm Height: 2,300 mm Weight: 8,300 kg Working area: 3,048 x 1,524 mm Max. workpiece weight: 1,450 kg Shortest pallet change time: 10 sec. Max. simultaneous speed: 200 m/min. Positioning accuracy: 0.03 mm Repositioning accuracy: 0.02 mm Screen size: 21.5 inches Number of shuttle tables: 2 Max. sheet thickness carbon steel: 35 mm Max. sheet thickness stainless steel: 30 mm Max. sheet thickness aluminum: 25 mm Max. sheet thickness brass: 16 mm Max. laser power: 12 kW Laser source type: Bodor Laser head: Bodor Genius Software: Bodor Thinker Including the following special accessories: - Extraction system (The connection/piping of the extraction system to the machine must be carried out by the customer) - Wear part set - Installation package - Including fully automatic loading and unloading module, Model: iTrans 3 Technical Data: Max. material size: 3,000 x 1,500 mm Min. material size: 1,000 x 1,000 mm Max. material thickness: 25 mm Min. material thickness: 1 mm Max. loading weight: 900 kg Max. loading weight for finished products in the trolley: 3,000 kg Dimensions loading module (L x W x H): 10,000 x 8,500 x 2,600 mm Weight loading module: 4,800 kg Errors and prior sale are reserved!

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel Bledpfx Ajya Iaqodhop - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 84200 € 1591.38 € 220 to 3050 mm 4 (Y1, Y2, X, R) 265 mm 2600 mm 450 mm 530 mm servohydraulisch 140 mm/s 10 mm/s 140 mm/s 650 mm 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 4250 mm 1770 mm 3000 mm 12600 kg Standard equipment: Bodpfx Adowiqudjhjlp 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correction/adjustment capability - USB ports and Ethernet connection for importing, backing up, and exporting programs - Windows operating system - Support for importing IGES, STEP, and DXF files Servo-driven backgauge mounted on linear guides with ball screws spindles Backgauge finger blocks mounted on dual linear guides CNC-controlled crowning (anti-deflection system) Intermediate clamping pieces with quick-release levers for the upper tool Upper tool 1010/A/75°/0.8/105, sectionalized and goose-neck 4-V die block 2009/85° (V = 16, 22, 35, and 50 mm), sectionalized Fiessler AKAS laser safety system mounted on the upper beam Sheet support arms on linear guides Oil fill Operating manual in German or English, including CE Declaration of Conformity OPTIONS: Z1/Z2 axes, Delta X axis, or 6-axis backgauge Delem CNC control DA-66S or DA-69S CAD/CAM software Bending support system Angle measuring system And much more

Condition: excellent (used), Year of construction: 2011, Year of construction: 2011, Arm range: 1717 mm, weight: 20 kg, Control unit: DX100 Bljdpfxjtxymmj Adhjp

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Bjdpjy Uuw Tefx Adhslp Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.