Form Cutter Sharpening Machine

SAACKE FSM

Year of construction: 2018, condition: like new (used), Dumeta hydraulic welding positioner, height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole, 100–200 mm Table diameter 700 mm Horizontal height min. 0.6 m, max. 1.2 m Tilted height min. 0.40 m, max. 1.0 m Speed 0.11–1.25 RPM Weight 750 kg Iijdpfxjhua Dqe Ab Asd Tilt up to 135° Hand and foot remote control with speed display Very robust

Condition: good (used), Tool sharpening machine with wet grinding. Iiodpfxjich Elj Ab Asd

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.15 m Tilted height min. 0.45 m, max. 0.95 m Speed approx. 0.01 - 1.3 RPM, digital display Tilting up to 135° Iiedsdpuapepfx Ab Ajd Hand and foot remote control with speed display Very robust This rotary table is also available in stock with 1000 kg and 3000 kg load capacity.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW Isdswzy N Uopfx Ab Asid • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Condition: excellent (used), Carbide saw double side grinder VOLLMER model CEF250 Iijdpfeukgw Usx Ab Aod

Condition: used, Year of construction: 2003, measuring range X-axis 300 mm measuring range Y-axis 290 mm measuring range Z-axis 650 mm tool diameter SK 50 mm Number of revolutions 30 U/min max. workpiecediameter 300 mm max. workpiece length 500 mm max. workpiece weight 40 kg accuracy +/- 0,002 mm Working speed X/Y/Z: 80 mm/s dimensions of the machine ca. 2,5 x 2,0 x 2,5 m weight of the machine ca. 1,2 t total power requirement 1 kVA Isdpfew E Np Sox Ab Asid Tool-Presetter WALTER - Heli Toolcheck

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Iedpfewwt Trsx Ab Ajid Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning Isdperxcu Sofx Ab Ajid - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis Iiedpfxsu N D Tlj Ab Aed The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: ready for operation (used), Rotational speed: 37-1900/min, an inspection is possible. Isdpfxoqvnmfo Ab Aeid