Precision lathe

Schaublin 102 N

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm DISTANCE BETWEEN CENTRES: 450 mm Guedpfx Aeyvlxqef Tja MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° Guodjx Tiy Tspfx Af Tea rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide Gujdpfodr R Tcox Af Toa 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor Gedpfew N Rh Ajx Af Tsua belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,950 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Model: FA55VSD+ Year of manufacture: 2020 Operating hours: 8,950 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Godpfxox Dfmzs Af Teua Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in excellent working condition and has been regularly inspected and maintained. It is currently still powered and can be viewed in operation. An associated air dryer and compressed air tank can be purchased optionally (see further listings).

Condition: good (used), functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Machine equipped with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and ground thread. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Thread cutting range: Metric: 20 pitches from 0.25 to 4 mm. Gjdeynimhjpfx Af Tsua Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross-slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Schaublin 102 N, Machine number BL 329218, Centre height 102 mm, Centre distance 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Gsdpfeynh Hyjx Af Tsua Tailstock, Accessories,

Condition: used, TECHNICAL DETAILS Gedpfx Afouhaxxj Teua - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 10'000 [rpm] COUNTER-SPINDLE - Z stroke : 140 [mm] GUIDE BUSH HOLDER 1 - Number of positions : 5 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 3 x 380 [V] - Total installed power : 3.5 [kVA] EQUIPMENT - CNC : Fanuc 21iT - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : LNS Alpha 320

Year of construction: 1987, condition: used, Schaublin 102N lathe with various tools Gujdpfxoyhyt As Af Tea

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: Gjdpfx Aswvq Tmsf Tjua For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Year of construction: 2003, condition: used, pressure 100 t stroke 10-130 mm no. of strokes 30-90 Hub/min throat 330 mm ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW Guodpfx Asra Rr Esf Tsa weight of the machine ca. 7 t

Condition: used, TECHNICAL DETAILS Guedpfxew Ihttj Af Tja - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Gjdpfx Afjcpznhe Toua Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning Guodpfx Afox D Nfus Tsa

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Guedpfx Afswbi Hps Tsa Cabinets are not included in the scope of delivery