Rigid milling machine

SCHELLING FZ 4

Condition: new, Type MB506C Working width 600 mm Overall length 2500 mm Iodpfsd Srkbsx Ah Uotr Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Year of construction: 1983, condition: used, machine/vehicle number: 1727, HM blade Ø: 300 mm here cutting depth max.: 100 mm Cutting blade speed: approx. 4000 rpm Drive motor: 380 V, 2.2 kW Space requirement: 350 x 600 x 400 mm Itodpfxebpfpne Ah Uer Weight: approx. 30 kg with trolley underframe, for moving on a track rail

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Itodpfx Ajxran Noh Usr Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left With tools as shown in the picture

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm Iodjw E Tzrspfx Ah Uetr - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, functionality: fully functional, fuel type: gasoline, DGUV certified until: 08/2026, Year of construction: 2016, machine/vehicle number: 20161600285, Equipment: UVV, Wet and dry cutting in one machine Electronic soft start Iodpfsxn Irnsx Ah Uotr Perfect for indoor use In transport case Maintained and DGUV tested until August 2026 E-Check valid until February 2025

Condition: good (used), functionality: fully functional, throat depth: 250 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 300 rpm, drilling capacity: 18 mm, column diameter: 100 mm, stroke length: 100 mm, spindle mount: MK 2, overall weight: 180 kg, Good day, Itodpfsxtxgtox Ah Usr We hereby offer you, without obligation, a used column drilling machine SB 16 ST manufactured by Flott. Model: SB 16 ST Drilling capacity (steel, Ø): 18 mm Spindle taper: MK 2 Drilling stroke: 100 mm Spindle outreach: 250 mm Column diameter: 100 mm Distance spindle / table, min. 140 mm, max. 790 mm Automatic feed: 0.10 / 0.16 / 0.25 mm/rev Speed range (rpm): 300 – 2800 rpm Connected load: 1.0 kW Machine weight: approx. 180 kg Note: The above technical data were taken from the operating manual, manufacturer’s brochures or other sources. We therefore cannot guarantee their accuracy or completeness. Scope of delivery: 1 used Flott SB 16 ST column drilling machine, without vise Application area and condition: The machine was sporadically used in a factory workshop for repair work and manufacturing spare parts for our own machinery fleet. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1991, functionality: fully functional, electrically raised table 4 knife shaft max planing width - 410 mm max thickness of processed material/thickness/ 220 mm shaft diameter - 125 mm feed rate - 7, 13, 17 m/min power of main motor - 4 kW feed motor power - 0.75 kW /0.8kW/ lifting motor power - 0,75 kW Iodpfx Asqwdx Aoh Ujtr

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, height adjustment type: mechanical, RM Group Spindle Moulder (Under Spindle) Specification: • Condition - used, fully serviced • Manufacturer - RM Group • Model - SM 110 • Spindle diameter 30 mm • Motor power 4 kW • Star-delta motor starter • 3 belt-regulated spindle speeds: 6,000 / 8,000 / 10,000 rpm • Manual up/down adjustment • Original paintwork • Extraction port - 120 mm • Year of manufacture - 2009 • Weight - 360 kg Ijdpfx Ahew Avxbj Ustr • Dimensions: 112 x 75 x 115 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site