High-performance panel dividing saw
SCM Gabbiani G 3

Year of construction

2023

Condition

Used

Location

Rodgau

High-performance panel dividing saw SCM Gabbiani G 3

Show map

Machine data

Machine type:: High-performance panel dividing saw

Manufacturer:: SCM

Model:: Gabbiani G 3

Year of construction:: 2023

Condition:: used

Price & Location

Location:: Hans-Böckler-Str. 3,63110 Rodgau, DE

Call

Details about the offer

Listing ID:: A20235535

Reference number:: SL-M-24002

Update:: 15.12.2025

Description

Cutting area: 5600x5600 mm

1x Gabbiani G 3 130 (56) - High-performance panel saw
1x Compact label printer
1x "eye-M EVO" operating console
1x Human-machine interface software (HMI) MAESTRO ACTIVE
1x Maestro Pattern
1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers
3x High-performance movable air cushion table - 2500x600 mm, with infeed rollers
1x Double lateral automatic aligner with motor drive
1x Foot switch for START/STOP of operating cycle
1x Grooving device with height-adjustable saw blade via control system
1x "Autosetting" device on the saw carriage for cut length/width
1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter
1x Quick-clamping of saw blades with mechanical "AKE" flanges
1x Selective collet closure (area 0 - 1600 mm)
3x Additional double collets
4x Additional single-finger collets
1x Compact office label printer
1x Cut editor
1x Maestro Optiwise - Advanced - No. 1 license
1x Maestro Connect: service contract for 1 year (including "plug & play" gateway kit)
1x Base
1x MACHINE LANGUAGE: German
1x PC LANGUAGE: GERMAN
1x SPEC01 special version 01
1x European safety regulations (CE marking)
Including 123 hours of on-site commissioning (within Germany) (daily working time is 8 hours including travel time).
Includes 1 day online training for MAESTRO OPTIWISE PRO (as required)
Includes 1 year MAESTRO CONNECT
Includes MAESTRO PATTERN IMPORT (normally €255 - free of charge)

Location:
Gusdpfx Aboxlvktj Usk

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2010

38 listings online

Call

Send inquiry

Telephone & Fax

+49 6106 ... show

Fax:

These listings may also fit your interest.

Listing

Beam panel saws with automatic warehouse SCHELLING FH 4 430/220-P

Germany

1,034 km

Beam panel saws with automatic warehouse
SCHELLINGFH 4 430/220-P

Call

Listing

Automatic Loading Panel Saws SCHELLING FH6 430

Italy

1,900 km

Automatic Loading Panel Saws
SCHELLINGFH6 430

Call

Listing

Double-side SIZING-EDGE BANDING Machine IMA Combima II/390/B/R3

Roreto

1,435 km

Double-side SIZING-EDGE BANDING Machine
IMACombima II/390/B/R3

Call

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Gsdpjd Nt Rqofx Ab Ueuk Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

See details

Listing

2019 Gabbiani Galaxy G3 110 Gabbiani Galaxy G3 110

Sesto Calende

1,368 km

2019 Gabbiani Galaxy G3 110
GabbianiGalaxy G3 110

Call

Condition: used, Year of construction: 2019, Numerical Control with WINCUT software Printer for barcode labels Cutting length mm 4300 Cutting width mm 4300 Blade projection mm 110 Double lateral aligner with pneumatic rubber cylinder N° 1 Fixed front Bakelite table with air curtain system and lateral guide for loading \ unloading panels N° 3 Adjustable front Bakelite tables with air curtain system for loading \ unloading panels Engraving unit (max blade diameter / power) Main blade unit (max blade diameter / power) 20 hp (15 kw) Optimized blade / presser ascent in self-learning Electronic adjustment of the engraver Adjustable speed of the blade carriage m/min 150 - 170 Speed of the pusher carriage m\min 0-90 Pusher carriage with n° 7 clamps TECHNICAL DETAILS TO BE VERIFIED Gusdpfx Abjwcdymo Uek

See details

Listing

C.N.C. WORKING CENTER with 3 axes X-Y-Z BIESSE Skipper 130

Roreto

1,435 km

C.N.C. WORKING CENTER with 3 axes X-Y-Z
BIESSESkipper 130

Call

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets Guedpowb Allefx Ab Uek In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

See details

Listing

PANEL SAW with REAR LIFTING TABLE SCHELLING FH 6 (430 / 220)

Roreto

1,435 km

PANEL SAW with REAR LIFTING TABLE
SCHELLINGFH 6 (430 / 220)

Call

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Godpfeq Rfahsx Ab Usuk Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

See details

Listing

Electric 4-wheel forklift Linde E 50 HL-01 - CONTAINER - TRIPLEX !!

Vöcklabruck

1,432 km

Electric 4-wheel forklift
LindeE 50 HL-01 - CONTAINER - TRIPLEX !!

€62,500

ONO plus VAT

Call

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,205 h, load capacity: 5,000 kg, lifting height: 3,925 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Gujdpfx Aot Iy Rvsb Ujk Battery Ah: 840Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: TOP CONDITION !!! - GENERALLY REFURBISHED by LINDE !!! Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, CE certificate, safety light, LED, Container compatible, Double pedal control, Integrated charger, Battery 92 % residual capacity !!!

See details

Listing

SOFTFORMING DOUBLE SIDE EDGEBANDER BIESSE Stream SB1 11.0 SOFT

Roreto

1,435 km

SOFTFORMING DOUBLE SIDE EDGEBANDER
BIESSEStream SB1 11.0 SOFT

Call

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Guodpfst N Ix Rex Ab Ujk Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

See details

Listing

PANEL SAW with REAR LIFTING TABLE SCHELLING FH 6 (430 / 930)

Roreto

1,435 km

PANEL SAW with REAR LIFTING TABLE
SCHELLINGFH 6 (430 / 930)

Call

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Gusdpfsq Rffiex Ab Ujk Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)

See details

Listing