Welding Table

SIEGMUND 750V - 1,2 x 0,8 / 28

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008 Ijdpfx Aowc Ndwjadean

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. Iodsvi Hryspfx Aadsan turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 Isdpfx Ajt Ipi Ioadsan with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Iaodpfx Aaemdn Dxodjn

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: Iajdpfox Nkdxox Aadon - Documentation

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Iaedpod A Etusfx Aaden

Condition: good (used), Edge grinder, edge grinder, grinder -Grinding height: 75 mm Iaodecmh H Ispfx Aadsn -Grinding length: 390 mm -Dimensions: 780/300/H520 mm -Weight: 40 kg

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Ijdpfsfy T H Iex Aadjan 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Band saw machine Iaedpfx Aaeilg Hdsdon Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. Iaodpfx Aofu Itbsaden • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers