Mobile exhaust system

Spänex SMU 6000.1

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, Rsdpfxjyi Efce Abujch - Device plug with phase inverter, including frequency inverter workshop tested

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Redpfxofpb Nme Abusch Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw Redjdqzh Rjpfx Abujch The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Rcedpfjudaazjx Abuoh Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: new, Year of construction: 2026, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Filter cleaning using vibration system with control Rodpfxsv Du Tne Abuech + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Rcodpfx Absq Ehpaoush Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Year of manufacture 1997 Volume flow 2950 m³/h 200 mm suction nozzle Motor 3.7 KW, 400 Volt Rcodev A Rv Ajpfx Abujh Technically in very good condition

Condition: new, Year of construction: 2023, For sale: a new, unused SPANEX SHB RS 55–70 briquetting press, manufactured in 2023. The package includes a separate intermediate hopper designed to feed wood chips and dust from an extraction system into the press. The press was purchased for our own production facility but was never installed or commissioned. It is stored disassembled on pallets, as shown in the actual photographs. The intermediate hopper is a separate unit, approximately 1.5 × 1.5 m. Included in the sale: • SPANEX briquetting press • Hydraulic unit and control cabinet Redpfx Abez Eqfcsusch • Intermediate hopper Technical information: • Briquette diameter: Ø 70 mm • Published output for the SHB RS 55–70 series: 50–90 kg/h, depending on the material • Custom configuration with a more powerful motor than the standard series specification The actual output of this particular configuration has not been tested. The exact installed motor rating can be confirmed from its nameplate. The first gallery image is a concept visualization showing a possible installation beneath a dust extraction unit. The remaining images show the actual equipment offered for sale. The large dust extraction unit is not included. Connections and installation will need to be adapted to the buyer’s system. The equipment is located in Latvia and can be inspected by appointment. We can assist with loading and transport arrangements.

Condition: used, Year of construction: 2024, power: 18.5 kW (25.15 HP), We offer for sale a high-quality ROBUST SD 60 industrial shredder, designed for efficient processing of wood waste, offcuts, and production residues. The machine is a modern unit (year 2024) and represents a reliable solution for recycling and size reduction in woodworking operations. Key Features & Benefits Manufacturer: ROBUST d.o.o. Model: SD 60 Year of manufacture: 2024 Universal shredder for wood waste and industrial materials Compact design with high performance Robust construction for continuous operation Adjustable output size via screen system Technical Specifications Rotor & Cutting System Rotor diameter: 260 mm Rotor working length: 549 mm Rotor speed: 80–120 rpm Number of knives: 14 pcs Material Input Infeed opening: approx. 939 × 567 mm Infeed hopper volume: approx. 0.4 m³ Output & Processing Screen size: 30 mm Output capacity: approx. 500 kg/h (beech offcuts) (depending on material type and screen size) Drive & Power Main motor power: 15 / 18.5 kW Hydraulic motor: 0.75 kW Voltage: 400 V Frequency: 50 Hz Required fusing: min. 32 A Dimensions & Weight Machine dimensions: approx. 1.88 × 1.12 × 1.67 m Weight: approx. 1,250 kg Condition & Equipment Condition: Good Modern machine (2024) Redpfx Abszgtnljuech Applications Wood waste processing Chips and offcuts shredding Recycling of production residues Suitable for joinery workshops and industrial plants Machine available immediately

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG – Advanced Industrial Dust Extraction System with Dual BIG-BAG Waste Collection The SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. The unit stands out with its use of two high-capacity BIG-BAG collection bags, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it provides effective extraction of sawdust, dust, and chips even during long-term continuous operation. Main Advantages of the Machine Two BIG-BAG collection bags – a unique market solution that increases waste storage capacity. VIBER system – automatic filter cleaning ensures constant extraction performance. TC housing – fully enclosed, sound-insulated construction reducing noise and vibrations. DAMAGE PROTECT system – mechanical protection preventing rotor damage caused by larger particles. REHEAT system – heat recovery from exhaust air, improving the energy efficiency of the facility. Rcjdpfx Aeudav Nebueh Design and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced rotor, ensuring stable, reliable operation and high extraction performance of 11,300 m³/h. The housing has been designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Work Efficiency Thanks to 64 polyester filters with filtration efficiency down to 5 microns, and the possibility of installing an additional HEPA filter, the unit provides safe and highly effective air purification. The high suction speed (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG is an ideal solution for: woodworking plants, furniture factories, operators of panel saws, edge banders, and sanding machines, industrial installations requiring a central dust extraction system. Standard Equipment VIBER system – automatic filter cleaning Two BIG-BAG collection bags Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT protection system Technical Specifications Parameter Value Power supply voltage 400 V Motor power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category "G" Filter dimensions Ø160 × 960 mm Number of filters 64 pcs Filtration area 30 m² Inlet diameter 350 mm Outlet diameter 500 mm Extraction capacity 11,300 m³/h Negative pressure 3000 Pa Air velocity 40 m/s Noise level 80 dB Number of BIG-BAGs 2 pcs BIG-BAG capacity 1250 L each / 2500 L total Dimensions (L × W × H) 3250 × 1100 × 3700 mm Weight 820 kg