Thicknesser, planer

Steton 630 16/21

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Bsdpfemiik Tex Aiwoww Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm Bjdpfor Ak Rgex Aiwoww infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional. Bwodpfjzd Uf Tsx Aiwjw

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Bodji Dfidopfx Aiweww Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, CORMAK PT265 Planer Thicknesser The CORMAK PT265 planer thicknesser is a professional woodworking machine designed for intensive and precise processing of solid wood and wood-based materials. The new version of this machine features an innovative connected table system that significantly improves work efficiency and eliminates adjustment errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable solution for carpenters, craftsmen, and production workshops requiring accuracy, durability, and consistent machining results. Main advantages of the machine New connected table system – synchronized calibration of the infeed and outfeed tables eliminates setup errors and improves machining precision. Stable cast iron construction – the 170 kg machine weight minimizes vibration and increases operating safety. Powerful S6: 2.6 kW motor – provides smooth and efficient processing of hard wood species. Quick conversion from surface planer to thickness planer – fast mode switching reduces downtime. Three HSS knives – ensure precise cutting and excellent surface quality. 265 mm planing width – allows processing of wider workpieces. Design and technology The CORMAK PT265 is a modern woodworking planer thicknesser based on a reinforced construction with cast iron components. The working tables are ground and properly balanced to ensure repeatable accuracy and precision. The innovative connected table system enables synchronized height adjustment – once the table level is set, no further calibration is required when changing the planing thickness. The centrally positioned thickness planer table mounted on a guiding column ensures even material feeding without deviations. Rubber anti-vibration feet additionally reduce vibration, improving component durability and machining quality. Precision and working efficiency Thanks to the 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable operating parameters, even when processing hard wood species. The Ø75 mm cutter shaft with three knives and a speed of 4000 rpm guarantees a perfectly smooth surface finish. The precise graduated scale allows accurate adjustment of the table height. The aluminium tilting fence (700 × 150 mm), adjustable from 90° to 45°, enables precise material straightening at various angles. Standard equipment Cutter shaft with three HSS knives Aluminium fence 700 × 150 mm Graduated handwheel for table height adjustment Cutter shaft guard Built-in Ø100 mm dust extraction outlet Rubber anti-vibration feet Technical specifications Parameter Value Cutter shaft diameter 75 mm Cutter shaft speed 4000 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives 3 Shaft length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum surface planing width 265 mm Maximum thickness planing width 265 mm Maximum planing height 180 mm Maximum thickness planing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thickness planer feed speed 6 m/min Fence dimensions 700 × 150 mm Bsdpfx Asvxhzneiweww Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Total motor power S6: 2.6 kW Power supply 400 V Operating manual (DTR) Included CE declaration Yes

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Bsdpfx Ajivpthoiwsww Model -WL6S Main motor -22kw

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Bwedpfx Asittnzeiwew Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: new, Year of construction: 2024, Martin T 54 jointer Bwodpfspgkmwjx Aiwsw Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 10-12-10-064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, Equipment: saw blade guard, scorer, ALTENDORF F45 – Panel saw, manufactured in 2010 Equipment according to the Altendorf factory archive, confirmed on July 31, 2026: - Manufacturer / Model: ALTENDORF F45 - Year of manufacture / Machine number: 2010 / 10-12-10-064 - Double sliding table: Table length 3,000 mm - Cutting width: 1,000 mm - Main motor: 5.5 kW (7.5 hp) - Saw blade diameter: max. 500 mm - Control: C-terminal on the machine stand - Scoring unit: 2-axis, with RAPIDO scoring system - Clamping system: Standard (toothed nut) - Table extension: 840 mm - Stops: Angle/miter stop; DUPLEX up to 1,350 mm - Electrical connection: 400 V / 50 Hz Complete video with original audio available in the advertisement. Price upon request. Offer includes free loading onto a truck. Inspection, loading, and transport by arrangement. Scope of delivery according to individual offer. Bodpfxjztwvaj Aiweww Taken over from a carpentry workshop in Reutlingen. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Bjdpsx Ebzdsfx Aiwoww Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min