Travelling column milling machine

TOS KUŘIM F 150

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 Knodpfxeyz Sd Ro Adysc weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Kjdpov Uxrvsfx Adyjnc Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Year of construction: 2002, condition: not inspected (used), Robot Knsdpfx Aogu U Itsdyec no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Signal light Kedpfx Adjzlqw Isyjnc 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system Knedpfor A Hcbex Adyoc - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Kodpfx Adswbginoyonc Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Kodpfeuz If Njx Adysnc Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 430 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 sur le X et 36 en Y/Z [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 x 430 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2062 x 2080 [mm] - Machine height : 2780 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of spindle hours : 3351 [h] EQUIPMENT - CNC : SMART - Interface : PCMCIA / RS232 - Interactive programming : Mazatrol - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Workpiece probe Kodpfxouhbu Ij Adyjnc

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm Knsdpfxsy R N Ils Adysc * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available in Q1/2027. Used for re-sharpening involute milling cutters / beveloid gear milling cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools / deep-hole drills, and other workpieces / components. Control system: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing table): 360° SK50 C-axis (rotary table): 270° X3-axis: electrically driven, with tailstock Grinding spindle: HSK80 (conversion to HSK50 possible) Dressing unit Tool changer: 10-position magazine Kodex Tr H Nepfx Adyonc Coolant system: Turbo Separator Extraction system: LTA CO2 extinguishing system Additional accessories available from the factory Software can be supplied customized according to customer requirements Pre-acceptance at the factory, commissioning, training, and final acceptance at the customer's site Financing / lease purchase possible Modifications possible