Blasting cabinet

Unbekannt

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm Fedpfx Aney Iwkcsljpk -Weight: 26.4 kg

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Fpodpju Eki Sjfx Anlok Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete Fpjdpfx Aoztwglenlsk -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg

Condition: used, A compact and lightweight portable extraction system for removing wood shavings and sawdust. Technical data: - Motor: 0.37 kW - Length: 650 mm - Width: 500 mm - Height: 1,800 mm Fpodjztvwvjpfx Anljk

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm Fedpfez H Dyox Anlopk weight: 750 kg

Condition: used, A block separator or block trap in mint condition for sorting out wooden blocks in extraction systems. Technical data: - Pipe: 300 mm - Length: 1,170 mm - Width: 380 mm - Height: 820 mm Fpjdpfx Anjztvwpsljk

Condition: used, A mobile extraction unit with a large filter area and a set of hoses for a small workshop. Technical data: - Extraction nozzle diameter: 160 mm - Motor power: 1.5 kW - Dimensions: 1,220 x 650 x 3,270 mm Fpodpfx Ajztvwcenljk

Condition: used, OMA 600 Automatic wood lathe, with loader Fodpfxerfh D Ie Anljpk

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm Fpedpfxeftfcws Anlek total power requirement 0 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm Fpjdjv Ey Nqopfx Anljk number 1 Plate thickness 400 mm weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m This plate has 10 t- slots in length direction each 32 mm wide.

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Fpedpfx Aney D Rk Ielsk Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Year of construction: 1990, length 4000 mm width 1500 mm table height 500 mm Fpedpfxoftfchs Anljk total power requirement 0 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,5 x 1 m

Condition: used, Year of construction: 1985, length 3000 mm width 2500 mm number 10 Plate thickness 350 mm weight of the machine ca. 5,14 t dimensions of the machine ca. 3 x 2,5 x 0,35 m Fpjdex Avqhepfx Anlek 10 pieces T- slotted floor plates with 32 mm slots.

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously Fpodpfew Rrcwex Anlek - Working pressure regulated via pressure regulator with pressure gauge

Condition: used, Year of construction: 1990, table length 2500 mm table width 1250 mm table height 950 mm Fpodpfeftfcdsx Anlsk total power requirement 0 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,25 x 1 m plate is heated.