Radial Drilling Machine - Universal

V-TRADE RBT 50/12H

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Total power requirement 1,2 kw Rsdpfxovz Hq Ho Aaasr

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed Rodelhwr Rjpfx Aaasr - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Rsdpfjv Rpf Sex Aaaor Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: used, mileage: 790,000 km, power: 357 kW (485.38 HP), first registration: 07/2011, fuel type: diesel, overall weight: 23,500 kg, axle configuration: 6x4, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Here is your chance to drive a US truck and transport 28 pallets if necessary. The price is incl. the trailer (EZ. 2015) We can also remove the body completely for you so that you have a SZM again or just purely as a show truck for cruising. Conversions such as chrome parts and leds are included in the price after consultation with you !!! Cummins ISX 15 L 18 Speed Fuller Rjdpfx Aaoqx Suloaer 2 beds Original Peterbilt leather seats Inside typical Peterbilt everything your heart desiresThe truck has too many extras to list. - Further questions by email or phone. - Price incl. German letter. - Errors and prior sale reserved - financing and trade-in possible, offer everything. - TIPPING HYDRAULICS POSSIBLE FOR AN EXTRA CHARGE!!! - . - OUR motorhomes ARE REGISTERED AND TAXED IN GERMANY AND ARE INCLUDING AN EU VEHICLE LETTER . WITH US, THE NAME HAS QUALITY WE CAN - - Your dream vehicle not included in Europe's largest US truck fleet ? Not your company or favorite color? No problem... we have over 500 more trucks or motorhomes in the USA and Canada new and used of all brands also work with one of the best paint shops in Germany let us advise you and make a free offer. we look forward to your call or uchstermine are unfortunately only possible with an appointment.

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Redpfx Aormkfnjaaer Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Rodswlgdyjpfx Aaajr Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Rjdpfx Aaeur H I Njaer Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm Redpetv Iklefx Aaaor throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec Rsdpfx Aaetqqr Reajr operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: used, Kawasaki Mule 4010 Rodpfx Aajyp Hyhsaer 4 persons Diesel 4x4 Extra hydraulics