Tailstock

VDF

Condition: used, Working length: 5.500mm Sheet metal thickness: 13mm Technical characteristics: *3 ROLLS WORKING *TOP ROLL DIAMETER Φ-500 Gbedpj Dvliofx Abdog *SIDE ROLLS DIAMETER Φ-300 (EACH ONE) *HYDRAULIC HOLDERS LEFT-RIGHT *HYDRAULIC LIFTING TOWER *HYDRAULIC PREBENDING

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Gbsdpfepy Errox Abdog

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. DIAMETER OF LANTERN SHAFT : 83 mm. Gjdpfxjr Ui R No Abdebg OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION

Condition: used, Down table size: 1120x1250mm Technical characteristics: *UP DOWN STROKE 1000 mms *FORWARD BACKWARD STROKE 1200 mms *LEFT RIGHT STROKE 1000 mms Godps Dv Nxefx Abdebg

Condition: good (used), functionality: fully functional, Between centers: 1500 mm Turning diameter above bed: 500 mm Turning diameter above support: 300 mm Turning diameter in pocket: 700 mm Spindle bore: 72 mm Spindle speeds: 18 pieces, 11-2000 RPM 3 jaw chuck, Gbjdpfju Tt S Nox Abdog 4 jaw chuck, Fixed and moving steady Cooling 1-axis Digital readout on workpiece diameter

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base Gjdsvby U Sopfx Abdsbg 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: excellent (used), mileage: 1,215 km, fuel type: diesel, color: grey, mast type: telescopic, Year of construction: 2016, operating hours: 66 h, General Information Year of manufacture: 2016 Purpose: Construction Drivetrain Drive: Wheel Functional Mast: Telescopic (4 sections) Gbodpfx Asuu Dh Eebdsg Mast length: 38.5 m Lifting capacity: 25,000 kg Superstructure brand: ZOOMLION QY25V51.5 25 TONS CRANE Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation Gbjdoh Hm Thjpfx Abdog -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 17,840 mm, loading space width: 1,750 mm, tire size: 9.50R17,5, wheelbase: 1,350 mm, color: blue, Year of construction: 1992, Color: blue Payload: 43,600 kg Extendable Manufacturer: Goldhofer Type: STZ-VL4-44-80 Extendable Low Loader Chassis number: WG0STZV47N0020238 Year of manufacture: 1992 Weights: - King pin load: 24,000 kg - Axle load: 10,000 kg - Total axle load: 40,000 kg - Gross vehicle weight (GVW): 64,000 kg - Unladen weight: 20,400 kg - Payload: 43,600 kg Axles: - Axle manufacturer: BPW - Air suspension - All axles with hydraulic steering - High/Low valve - ABS braking system - Tyre size: 9.50R17.5, double mounted - Load index: 143/141 J Dimensions: - Length: 17,840 mm - Extensions: 4,000 mm - Maximum extended length: 21,840 mm - Loading platform length: 8,000 – 12,000 mm - Loading platform width: 2,750 mm - Height: 600 mm (+/-100 mm) - King pin height: 1,300 mm Additional Information: - Hydraulic connections for truck hydraulics - Lashing rings - 2x spare wheels - Detachable gooseneck - Hydraulically operated gooseneck - Working lights Gbjdpsuu Hbhjfx Abdog - Rear bumper with lights - King pin 3.5” - Schübler lubrication system - Outriggers for loading platform widening - Fixed ramps on loading platform - High/Low valve = Further Information = General Information Year of manufacture: 1992 Axle Configuration Tyre size: 9.50R17.5 Axle brand: BPW Rear axle 1: double tyres, max axle load: 10,000 kg, steered Rear axle 2: double tyres, max axle load: 10,000 kg, steered Rear axle 3: double tyres, max axle load: 10,000 kg, steered Rear axle 4: double tyres, max axle load: 10,000 kg, steered Weights Unladen weight: 20,400 kg Payload: 43,600 kg Gross vehicle weight: 64,000 kg Functional Extendable body: Yes Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request Further information Please contact Stefan Schaapveld for more information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Gbjdpfxexqyxlo Abdjg Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells