Gang drill with 4 stations MK2, bench drill, pillar drill, drilling automatic machine.

WEBO B 20

Condition: good (used), functionality: fully functional, 4-speed gearbox Iedovcb Ntopfx Addetb speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment vice available at extra cost

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates Itodpoh Rvxhjfx Addsb

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg Isdpfxed Tm Hne Addotb

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Ijdpfx Adjctutmodotb Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 Ijdpfxefrlndj Addjtb 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Iedpfx Aoxc It Ioddjtb Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW Itedpfx Ast Hw U Noddjb weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Itedpfx Aded Egc Asdsb Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Iedpfx Asxzk Iroddstb Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: excellent (used), Year of construction: 2020, operating hours: 5,000 h, functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, Line Salvagnini in perfect condition configuration : MD1.30 store + S4.30xe punching machine + IA3015 unloading device + ACN manual loading panel bener, + RIP turning device+ P4L 2516 panel bender 2.5m bending + SAP unloading device Itodpfxov Icmqe Addsb