Knife grinding machine

Weinig RIEHLE RS 2000/1 RS 2000

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange Bljdpfx Amju Dn Txj Tsk (ø 240 x 25 mm), wet grinding attachment

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Bledoxdxhrjpfx Am Tek Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2014, functionality: fully functional, Table surface: 850 x 400 mm Magnetic table: 800 x 400 x 105 mm Max. table travel (X x Y): 950 x 440 mm Max. workpiece weight: 700 kg (230 kg on the magnetic table) T-slots on the table: 3 pcs x 17 mm Distance between table and spindle center: 47,5 – 547,5 mm Grinding wheel dimensions: D355 x 38 x d127 mm Spindle speed: 1500 / 1800 rpm (50Hz / 60Hz) Bledpfxsy T Nuwo Am Tek Spindle drive power: 3.7 kW / 4.0 kW Longitudinal travel: 3 – 25 m/min (hydraulic and stepless) Cross travel: 1 – 1000 mm/min Vertical feed rate: 1 – 1000 mm/min Minimum increment / feed amount: 0,0001 mm – 0,0002 mm Machine weight: 4000 kg Dimensions (L x W x H): 3310 x 2228 x 2710 mm Accessories / Equipment - Semi-automatic operation - Magnetic table 800 x 400 mm - Coolant system with magnetic separator - Paper band filter - Machine feet - Digital display system for the infeed / increment - Built-in wheel dresser in the spindle head The machine is being sold due to company liquidation. It is in good condition and still under power in Hungary.

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Bledjwl A H Djpfx Am Tok Machine weight approx.: 5.8 t

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min Bjdpfx Amsunt Iue Tolk table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: good (used), Grindable, largest diameter: 200 mm Bodpfx Amslz Nxwj Tslk Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: ready for operation (used), Magnetic knife sharpening machine with a maximum sharpening length of 3.2 meters. Magnetic holder. In perfect condition. Blsdpfx Amezh Rbfs Tok The machine will be located in the Görlitz area until the end of August.

Condition: new, Year of construction: 2026, High-quality design The drive roller is crowned (this ensures that the sanding belt centers itself automatically on the roller) and is fully vulcanized for maximum service life and smooth operation. Tool-free and therefore faster, simpler replacement of the sanding belt. Stepless height adjustment for optimal adjustment of the belt sander to the user. Freely adjustable metal stop for optimal and safe guidance of workpieces when using the large flat sanding area. Belt speed is designed for optimal performance, largely preventing the workpiece from burning during processing. Models with dust extraction are equipped with robust and flexible extraction hoses. Motor protection switch with CEE coupling socket including phase inverter. 5-year warranty on the motor. 1-year warranty on the belt sander. Belt length: 2000 mm Belt width: 75 mm Flat sanding area: 600 mm Belt speed: 15/30 m/s Color: RAL 9007 Motor, three-phase 400 V: 3.0/3.75 kW Extraction capacity: approx. 630 m³/h Extraction motor: 0.37 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Blodpfx Amobb R N Ij Tsk Machine dimensions (with dust extractor) (W x D x H): 800 x 600 x 1450 mm Weight: 105 kg DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Bsdpoxzuyrefx Am Tjlk Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Bodjv A Hgkjpfx Am Tjlk Weight 0 kg Total power requirement 2,2 kw