Weinig Unimat 23 E four-sided planer

Weinig Unimat 23 E

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Iiodpfx Amoz Nir Re Doh Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: Iiodoz Tqznopfx Am Doh - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces and a long dressing table. Short-piece package Grooved bed Mobile spindle Iedpfxezrx Emj Am Dsih Technical data: - Spindles: 6 - Spindle 1: Bottom / 50 mm / 5.5 kW - Spindle 2: Right / 50 mm / 11 kW - Spindle 3: Left / 50 mm / Shared motor with spindle 2 - Spindle 4: Top / 50 mm / 5.5 kW - Spindle 5: Top / 50 mm / 5.5 kW - Spindle 6: Bottom / 50 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Planing table length: 2,500 mm - Feed: 5.5 kW - Axial stroke of vertical spindles: 80 mm - Axial stroke of horizontal spindles: 45 mm

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Iijdozrxzhjpfx Am Djh Technical data: - Optional: Conversion to a conventional smooth table, on request. - Spindles: 5 - Spindle 1: Bottom / 40 mm / 5.5 kW - Spindle 2: Right / 40 mm / 7.5 kW - Spindle 3: Left / 40 mm / Shared motor with spindle 2 - Spindle 4: Top / 40 mm / 7.5 kW - Spindle 5: Bottom / 40 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Feed: 4 kW / 5–24 m/min

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Iiedpfxoxz Hh Uo Am Djh Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Year of construction: 1997, condition: excellent (used), max width of the workpiece 23cm max height of the workpiece 18cm Ijdpjk Dxraofx Am Djih 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 top horizontal spindle heads adjustable up / down, right / left spindle diameter 40mm Hydraulic side feed on the feeding table

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Ijdoz Da R Sjpfx Am Dsih

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Iiedpfx Ajzuzdqjm Djh Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Technical specifications: Max. planing width: 240 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom: 5.5 kW right/left: 7.5 kW top: 5.5 kW top: 5.5 kW bottom: 5.5 kW universal: 5.5 kW Spindles 1/4/5/6 are on separate motors Spindles 2/3 are on one motor Grooved tables Grooved rollers in the table: 2 Top steel feed rollers: 5 Top rubber feed rollers: 3 Dust extraction port diameter: 6 x 140 mm Infinitely variable feed rate adjustment Feed via cardan shafts Table lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Iijdpoycu R Ijfx Am Deh Electric lifting of the machine body Power supply: 400 V Total power: 46 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Iedpfeu Damdex Am Doih