Tapping Machine

WMT FL-M24

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Dkedpfxjxzplie Abuoh Weight (kg) approx.: 2440 Quantity in stock: 1 Manufactured in: Finland / Netherlands Comments: >x emergency generator set, without electric panel

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Dodorxr Rgopfx Abuokh

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Dodpfju Rnlujx Abuskh Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON Dodpfx Abeup Hwxsuokh - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Dksdovrxd Hspfx Abujh Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range Dkodeu R R Avepfx Abujh 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Dkodox Atyaopfx Abujh

Condition: excellent (used), Year of construction: 2005, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: U-HD 800 Heating surface approx.: 14 m² Previously operated with: 640 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.05 bar Water content at normal level approx.: 748 l Total water content approx.: 1,108 l Year of manufacture: 2005 Dkodpewwt D Defx Abuoh CE marking: CE 0036 Equipped with Weishaupt combination burner gas & oil type GL3/1-E, ZMD, gas control section, control cabinet, feed water pump and existing coarse and fine fittings.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Dedpfxjwbhq Hj Abuskh Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 Dksdpjv I Tx Refx Abuoh PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS