Surface planer

WOODLAND MACHINERY MB505C

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg Djdpod H Sc Ejfx Abujun

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine Dsdpfx Abjfbr S Rjuoun coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Dodpfoggghmjx Abujun

Condition: excellent (used), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Adjustable feed speed: 4 steps Duedpfxjx Hfg Nj Abusn Cutterhead with traditional knives 4-knife cutterhead Power: 4 kW Weight: 670 kg

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) Duodpfehw Ng Isx Abuon USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Dusdpfx Absdnxydsusn Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine Dujdpfeiypzlsx Abuen

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit Duodpfxed Inkte Abuen

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit Dedpfxskyt Ulo Abueun - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life - 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Duododmi Nispfx Abusn Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg