Used 3D Printers for sale (150)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4a99688d-3381-4979-8e5b-43, Year of construction: 2022, operating hours: 164 h, empty load weight: 530 kg, construction height: 525 mm, construction width: 400 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item by the deadline of 28/02/2026! Hardly used demonstration machine! TECHNICAL DETAILS Build volume (single nozzle): 525 × 400 × 400 mm Build volume (multi-nozzle): 500 × 400 × 400 mm Build chamber volume: 84 l Layer height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Hedpfx Aajx Ttifeaek Temperature control: up to 200 °C Extrusion system: Direct-drive print head with two nozzles Materials Thermoplastics: Vega™, ULTEM™ 9085 filament, Onyx®, Onyx FR Continuous fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Machine dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Print head weight: 3 kg Operating hours: 164 h EQUIPMENT Eiger software Direct-drive print head with three nozzles Compatible with various thermoplastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification CE mark EU Machinery Directive compliance

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location. Hjdsibikwspfx Aaaok

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Hjdeqwkypjpfx Aaajk

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G3700003, Year of construction: 2019, operating hours: 1,022 h, Ladies and Gentlemen, We hereby sell our Stratasys Objet260 3D printer. It comes with everything needed for operation (including user maintenance), except printing material and support material. Included accessories: Demo set sample prints Poster color print demo set Demo set USB sticks Software 2x print head wiper 2x WiperBlade BuildTray sensor Various wear parts 2x UV lamp bracket UV reflector with lamp Vacuum hose Waste container Waste container small Wiper blade Tool set Nozzle ruler Accessories exhaust air connection Connection cable accessories Drip trays Print head calibration Print paper Overhead foil Calibration Hedpfxotu Uvze Aaaok Sandpaper UV lamp cleaning KVM switch Transport lock + connection cable Accessories UV lamp calibration Scale for print head calibration I will be happy to send you pictures and/or article numbers from the manufacturer on request. If you have any questions, please do not hesitate to contact me.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2021, We offer this Stratasys Fortus 450mc 3D printer in excellent condition, year of manufacture 2021. Hjdpeym Dl Nsfx Aaaek If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Hjdpfsvtftqox Aaaek Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530021, Year of construction: 2018, operating hours: 25,200 h, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum build volume: 490 × 390 × 200 mm Maximum number of materials per part: 82 Support material: SUP705 / SUP706 (soluble) Horizontal layer thickness: 16 μm Resolution and accuracy X-axis resolution: 600 dpi Y-axis resolution: 600 dpi Z-axis resolution: 1,600 dpi Resolutions by print mode Digital materials: 30 μm High quality: 16 μm High speed: 30 μm Software and compatibility Hjdpfx Aswhllzjaaok Software: Objet Studio™, compatible with GrabCAD Print Workstation compatibility: Windows 7 / Windows 8 MACHINE DETAILS Device dimensions: 1,400 × 1,260 × 1,100 mm Device weight: 430 kg Material cabinet size: 330 × 1,170 × 640 mm Material cabinet weight: 76 kg Operating environment and power supply Temperature range: 18 to 25 °C Humidity: 30–70% (non-condensing) Power requirement: 110 to 240 VAC, 50/60 Hz, 1.5 kW, single-phase EQUIPMENT - LAN network connection TCP/IP - CE/FCC approval Machine has been regularly serviced by the manufacturer

Condition: like new (used), functionality: fully functional, machine/vehicle number: D31369, Year of construction: 2019, operating hours: 73 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 355 mm, table length: 254 mm, construction height: 355 mm, --- RARE OPPORTUNITY --- Stratasys F370 for sale due to business closure. Barely used, with only 70 operating hours—essentially in like-new condition. This printer is ideal as an addition to existing machine parks or as a high-quality all-rounder for newcomers to 3D printing. The printer is currently packaged and in storage. It was inspected and serviced by the manufacturer’s authorized distributor prior to proper decommissioning. The most recent exported cfg file can be provided upon request. The F370 was designed with user-friendliness in mind, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide selection of materials for various 3D printing applications, typically including prototyping, the production of tools and fixtures, as well as low-volume manufacturing of end-use parts. Its compact footprint and quiet, safe operation—without requiring special arrangements—make the F370 ideal for workshops, offices, or even classroom environments. With soluble support material, even complex geometries with internal cavities can be created—uncommon in this class of printers. The four easily accessible material spool bays on the front (2x model & 2x support) allow for quick material changes. Hedpfx Aasxgh U Teaek The complete package is rounded off by the GrabCAD Print and Insight design-to-print software applications, automatic calibration, an integrated camera for remote print job monitoring from your computer, and an intuitive front-panel interface.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Hsdpfx Aajxnp Hajask Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Fast & Flexible: High throughput for your production Industrial Quality: End products in series quality, available immediately Hsdsxl Ry Aepfx Aaask Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition Hedpfx Aajyt Rk Esaok - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Hedox Dy Iaepfx Aaask

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Hsdpfxswpkcne Aaaek Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, total length: 1,950 mm, total height: 1,790 mm, total width: 2,430 mm, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, power: 5.8 kW (7.89 HP), For sale is a BigRep-PRO, which unfortunately doesn't receive the attention and use it deserves and has become too large for our purposes. We purchased the device directly from the manufacturer, and everything has been serviced and maintained by specialists from BigRep GmbH, who took care of the machine so that we can hand it over with peace of mind. The only issue, as you can see in the pictures, is the pane on the left door, which we had to replace because the old one broke accidentally. However, it doesn't affect its functionality or anything else, just a cosmetic flaw. However, the entire device is still packaged in the manufacturer's film, which, as you can clearly see, is practically factory-made. Depending on our agreement, we can also include some filament (which is large for approximately 15 rolls). The device can be viewed and inspected on-site - appointments can be arranged. Hsdpfxov In Hcj Aaaok If you have any further questions, please contact us directly.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, No minimum price - guaranteed sale to the highest bidder! Maintenance regularly performed by BigRep GmbH technical staff TECHNICAL DETAILS Nozzle size: 0.6 mm Layer height range (for 0.6 mm nozzle): 0.1 mm – 0.4 mm max. output (with 0.6 mm nozzle): 16 mm/s Extruder: Two MXT extruders with 0.6 mm and 1 mm nozzles Printing area Build volume (X × Y × Z): 1,005 × 1,005 × 1,005 mm Layer height resolution: 0.1 mm – 0.8 mm Acceleration: up to 10 m/s² Printing technology: FFF – Fused Filament Fabrication (material extrusion) Printing materials: ASA, PA66 (other materials in development) Support materials: soluble plastics Hjdswpqm Hepfx Aaaek Max. print bed temperature: 99°C MACHINE DETAILS Printer (L × W × H): 1,950 × 2,430 × 1,790 mm Printer weight: 1,500 kg Installation requirements Floor: even and flat Safety distance: 2 m around the machine (when doors are closed) Required floor load: 500 kg/m² Operator: operator must be trained Operating temperature: 18°C to 25°C Relative humidity: 30 to 70% (non-condensing) Exhaust diameter: 100 mm Electricity Connection configuration: 3 × AC 400 V, 50/60 Hz Connections: CEE socket (400 V, 16 A), LAN network (RJ45) Input current: 16.0 A Power consumption: 5,800 W Safety certifications: CE certified EQUIPMENT - 15 rolls of large filament - Packaging: original manufacturer’s foil

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Hedpfxswhduus Aaaok

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Z50009537, Year of construction: 2018, operating hours: 167 h, total length: 50 mm, total height: 81 mm, total width: 57 mm, type of input current: DC, overall weight: 41 kg, input voltage: 220 V, table width: 305 mm, table length: 305 mm, For sale significantly below market value: a professional Replicator Z18 3D printer that has seen very little use (only 166 operating hours). Extra-large build area: 30.5 x 30.5 x 45.7 cm Features: - Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform - Cloud-based system with application support - MakerBot Replicator Smart Extruder, motion controller, and new axis design - Integrated onboard camera and diagnostics, assisted calibration - Large build volume allows for rapid prototyping and model production - 11% larger print area than the MakerBot Replicator 2 Build volume: - 25.2 L x 19.9 W x 15.0 H cm Hjdpfsxt Er Ajx Aaaek - 7,522 cubic centimeters Easily and quickly produce realistic objects - On-demand printing capability - 100-micron resolution: print ultra-thin layers - Create professional-quality, high-resolution prototypes and complex models - Fine surface finish with no need for post-processing - Produce realistic prototypes and models for presentations Includes: - 3.5" color LCD display: onboard user interface for a rich user experience - Access your personal library and preview 3D files - Onboard utility for setup and maintenance MakerBot Replicator Smart Extruder (print head): - Easily replaceable - Detects filament outage and pauses printing automatically - Sends notifications to MakerBot Desktop and MakerBot Mobile app Onboard camera: - For print monitoring and sharing on MakerBot Thingiverse or social platforms - Mobile control option

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer Hjdpfx Aasx I Rfgeaek

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns Hjdpox I Rfasfx Aaajk MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on Hsdpexu Ewzofx Aaaok EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: used, TECHNICAL DETAILS - Max. print size : 490 x 390 x 200 [mm] - Max. print volume : 38.22 [L] - Min. print thickness : 0.02 [mm] - XY accuracy : 0.03 [mm] - Materials : Thermoplastic Hsdpeuhcbpsfx Aaask - Power supply : 110-240 [VAC] 50/60 [Hz] 1.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1,400 x 1,260 [mm] - Machine height : 1.100 [mm] - Machine weight : 429 [kg]

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HP Jet Fusion 4200 3D Printing Solution Hsdpfxswaw Hbo Aaaek 3D printer, processing station and two build units are in excellent used condition. It was operated in a controlled laboratory environment for the production of orthotic and prosthetic devices and has been under continuous HP service support during its entire operation. Why choose the HP Jet Fusion 4200? • High Productivity: Designed for industrial-scale production, with fast build speeds and short cooling cycles. • Superior Part Quality: Produces strong, functional parts with excellent surface finish and dimensional accuracy. • Cost-Effective Production: Low cost per part with optimized material usage and minimal waste. • Reliable and Proven Technology: Trusted by manufacturers worldwide for its consistency and performance. • Easy Integration: Seamless workflow with HP software solutions and optional post-processing stations. Technical Specifications: • Build Volume: 380 x 284 x 380 mm • Layer Thickness: 0.08 mm • Print Speed: Up to 4500 cm³/hr • Material Compatibility: HP 3D High Reusability PA 12, PA 11, and other supported materials • Connectivity: Gigabit Ethernet Typical Applications: Functional prototypes, production parts, orthotics & prosthetics, jigs & fixtures This is a great opportunity to acquire a professional industrial 3D printer with a strong track record, at a fraction of the original cost.

Condition: excellent (used), Year of construction: 2013, Stratasys 3D printer Dimension Elite Maximum build volume : 203x203x305mm Size: 686x914x1041 Hsdet Dq Rlepfx Aaaok Weight (kg): 136

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F370CR, Year of construction: 2023, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, Ex-display, like new. Available Now - Excellent Price! Composite-ready industrial FDM 3D printer with large build volume and soluble supports. Ex-display unit from 2023 in pristine, fully tested condition. Immediately available in Ostrava, Czech Republic. The prices includes consumables (NYLON-CF10, ABS-M30 IVR). Hsdsv Uv Eyspfx Aaaok What can the Stratasys F370CR do for you? ✅ Unmatched Precision & Repeatability Enjoy print accuracy up to ±0.2 mm. Built-in automation ensures stable printing with minimal waste. ✅ Strong, Durable Parts Print high-performance parts reinforced with carbon fiber materials like ABS-CF10 and FDM Nylon-CF10 – ideal for replacing metal components. ✅ Complex Geometry Advanced soluble support materials allow for the seamless creation of intricate structures that would be difficult or expensive using traditional methods. ✅ Streamlined Workflow & Easy Integration GrabCAD Print™ makes print preparation simple and works directly with your CAD models. Upgrade to GrabCAD Print Pro™ or Insight™ for advanced optimization features.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! Hodpfjxu E Srsx Aaaok TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA