Used 3D Printers for sale (164)

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Cedpe Adqx Tjfx Abrehd Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W - Layer thickness: 110 microns - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Chsdpfxszy Rwqo Abrjd Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: used, Year of construction: 2017, operating hours: 24,500 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, overall weight: 750 kg, input voltage: 400 V, input current: 30 A, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP. Last print was run on 17/07/26. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. Codpfxozx U Iko Abrshd The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract has EXPIRED. The buyer will need to arrange service and recertification on relocation. That cost is not included in our price.

Condition: used, functionality: fully functional, machine/vehicle number: 3-1-01699-02-37 (5LM37), Year of construction: 2015, operating hours: 46,537 h, type of input current: three-phase, input voltage: 400 V, input current: 16 A, laser power: 10,000 W, feed length X-axis: 275 mm, feed length Y-axis: 275 mm, feed length Z-axis: 420 mm, power: 10 kW (13.60 HP), We are offering a used 3D Systems ProX 350 3D printer, manufactured in 2015. Chedpfj Ahyw Tsx Abred Type: ProX 350 Manufacturer: 3D Systems Year of manufacture: 2015 DMLS (Laser Beam PBF) - Powder 3D Printing Technology. Materials: Metal (used Titanium) - Ceramic Electrical supply: 3 × 400 V AC + N + PE Frequency: 50–60 Hz Rated current: 16 A Power: 10 kW Rated short-circuit current: 6 kA Serial number: 3-1-01699-02-37 Compliance: 21 CFR 1040.10 and 1040.11 Machine sold complete with the following components: -Powder feeding unit -External filter -Vacuum pump -Blower -Recycling unit -Chiller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Csdpfx Asz Dudgebrjhd Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Cedpoz Dugnjfx Abrehd Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10368, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Chedpsz Dudmjfx Abred Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10356, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Chjdez Duhrjpfx Abrsd Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) Codpfx Abjz Dgfvjrshd NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: used, functionality: unexamined, Year of construction: 2018, operating hours: 1,270 h, Printer was relocalised to different production plant but was never again installed in new location and new production director Cjdpfs Ah Edgox Abrjhd prefare different 3D printing technology - HP.

Condition: repair required (used), functionality: not functional, machine/vehicle number: 125-00100(L0449), Year of construction: 2015, operating hours: 12,259 h, input voltage: 230 V, input frequency: 50 Hz, laser power: 5,000 W, electrical fuse: 21 A, feed length X-axis: 914 mm, feed length Y-axis: 609 mm, feed length Z-axis: 914 mm, We are offering for sale an industrial Stratasys Fortus 900mc (900mc V0-A-Classic) 3D printer, manufactured in 2015. The machine is sold as is, and requires some work to be put back into service. Technical specifications: Manufacturer: Stratasys Model: Fortus 900mc (900mc V0-A-Classic) Year of manufacture: 2015 Print head: P5-1 Technology: 3D printing by fused deposition modeling (FDM) Condition: Requires repair Compatible thermoplastic materials: ABS-M30 ULTEM 1010 ULTEM 1010 CG ULTEM 9085 ULTEM BLACK ULTEM 9085 CG Csde Ahp A Hopfx Abrshd To enable the machine to be put back into service, the following work is required: Replacement of the fan. Replacement of the loading bay. The estimated cost of the repairs is approximately €10,000. Additional information: This machine represents an opportunity for an industrial company or a 3D printing specialist wishing to acquire a Stratasys Fortus 900mc that needs to be refurbished. For any questions, requests for additional information, or to arrange a visit, please do not hesitate to contact us by message or by phone.

Condition: used, functionality: fully functional, Year of construction: 2018, Printer was used at research centre but last 5 year after the printer was repaired , there was changed printing head in 2021 Chedpfxs Ah E Nrs Abred and since there the printer was not used much

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Chedpfezqz Hwjx Abrjd Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: used, functionality: fully functional, machine/vehicle number: 200123013-09, Year of construction: 2018, type of input current: three-phase, overall weight: 1,360 kg, input voltage: 208 V, input frequency: 50 Hz, laser power: 10,000 W, feed length X-axis: 381 mm, feed length Y-axis: 330 mm, feed length Z-axis: 457 mm, We offer a used 3D Systems PROX 500 3D printer, model ProX 500 (132540-00 Rev A), designed for polymers, manufactured in 201. Manufacturer: 3D Systems, Inc. Cedpe Ahq I Refx Abrshd Model: ProX 500 Materials: Polymers Serial Number: 200123013-09 Electrical Supply: 208 V AC, three-phase, 50/60 Hz Apparent Power: 10 kVA Weight: 1360 kg Short-circuit interrupting current: 200 kA Electrical Diagram Number: 132508-00 Laser Class: Class 1 laser product; Class 4 laser inside Included option: ProX MQC (2017) S/N 20052303004 Donalson Torit DCE If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, Procure 750 UV Oven made by 3D Systems Used but in full working order. 1 owner from new. Machine in my warehouse in UK. Can put on pallet ready to load. Chjdpszxaafefx Abrsd Contact me for more info.

Condition: good (used), functionality: not functional, machine/vehicle number: 155-11000 (K10170), Year of construction: 2017, operating hours: 3,000 h, input voltage: 208 V, input current: 18 A, input frequency: 50 Hz, laser power: 5,000 W, Industrial 3D printer – Stratasys Fortus 450mc Technology: additive manufacturing via fused deposition modeling (FDM). Year of manufacture: 2017. Compatible materials (thermoplastics): ABS-ESD7 ABS-M30 / M30i ASA Nylon 12 PC-ABS ISO / PC Codps Ahpf Hsfx Abrohd ULTEM 1010-CG ULTEM 9085-CG Overall condition and technical information: Machine is functional at approximately 90%. Reconditioning of the spool supports is required. Software version: 6.2.6624.0. Print head number: P2-1. Industrial machine designed for the production of prototype parts, functional parts, and small production runs in technical thermoplastic materials.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 199 h, type of input current: AC, input voltage: 240 V, input frequency: 50 Hz, electrical fuse: 10 A, Very good condition with original equipment and tools. Only 200 print hours. Chsdpfx Abs Ahyt Torjd

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. Cjdevblu Depfx Abrohd New nozzle and new print bed just installed, ready for new owner.

Condition: good (used), functionality: fully functional, Year of construction: 2016, overall weight: 600 kg, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, Stratasys Fortus 450mc for sale, Contruction year 2016, low operating hours The Stratasys Fortus 450mc is an industrial-grade FDM (Fused Deposition Modeling) 3D printer, widely used in aerospace, automotive, and medical device manufacturing for functional prototypes and end-use production parts. This unit has been operated in a professional production environment and is fully functional. Technical Specifications: Build envelope: 406 x 355 x 406 mm (16" x 14" x 16") Technology: FDM (Fused Deposition Modeling) Layer thicknesses: 0.005"(0,127mm) / 0.007"(0,178mm) / 0.010"(0,254mm) / 0.013"(0,33mm) Number of material bays: 4 - 2 model + 2 support Machine weight: approx. 600 kg Machine running on external Air pressure, to reduce machine noice. Csdpfxsznl N Re Abrjhd Internal air compressor can be purchased and installed. Materials/Licenses: ABS, ASA, PC, PC-ISO, PC-ABS, Nylon12, ULTEM9085, ULTEM1010, Antero. Included: - Fortus450mc + EU Transformer. - Support Removal Wash Unit (German Sonic Cleanstation UW90) Machine located in Roskilde, Denmark

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Csdpfx Aetvfwkebrehd Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: used, functionality: fully functional, machine/vehicle number: 2919007, Year of construction: 2019, operating hours: 3,300 h, total length: 2,600 mm, total height: 2,700 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 400 W, Equipment: compressor, LM SOLUTIONS SLM 280 – 2019 – 800 HOURS – €60,000 Industrial 3D metal printer for sale – Proxicad Srl, Italy Chsdpfx Abo Ad Nypjrjd Proxicad Srl is offering for sale an SLM Solutions SLM 280, an industrial machine for the additive manufacturing of metal components, year 2019. The machine is used and is stated to be in perfect working order, with 800 operating hours recorded. The SLM 280 is intended for industrial applications requiring the production of metal components using laser powder bed fusion (LPBF) technology. Key features: Brand: SLM Solutions Model: SLM 280 Year of construction: 2019 Operating hours: 3300 Condition: used, in perfect working order according to the seller Location: Abruzzo, Italy Asking price: €50,000, negotiable

Condition: used, Year of construction: 2014, Printing technology: FDM: build process using molten plastic Build volume X × Y × Z: 254 × 254 × 305 mm Layer thicknesses: 0.178 / 0.254 / 0.330 mm Chedpfx Abs Ahkluorjd Model material: ABSplus P430 Support material: SR-30, soluble support material Material supply: Separate cartridges for model and support material Cartridge capacity: Approximately 922 cm³ per cartridge Network connection: Ethernet RJ45 Software: Stratasys Insight for print preparation Power supply (as per nameplate): 100–240 V, 12–6 A, 50–60 Hz Product number: 163-00500

Condition: used, Year of construction: 2013, Technical specifications: Build volume/build size max: 1,000 × 800 × 500 mm, layer thickness up to 27 microns, high speed: up to 3 base resins, 27 µm resolution, super-high speed: 1 base resin, 55 µm resolution, PolyJet UV technology, 110-240 V, dimensions: 2,870 x 1,960 x 2,105 mm, weight: 2,200 kg; NOTE: The printer was fully overhauled by STRATASYS in 2025, and an upgrade costing approximately €135,000.00 net was installed; additionally, it comes with accessories such as an exchangeable print plate with a mobile lifting frame, various spare parts, and various printing materials. Fully functional condition. The machine is already located at another site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Csdo Af Nl Rspfx Abrohd

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Chjdpjytg Rzefx Abrod Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. Chsdpoztn Dzjfx Abred - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.