Used horizontal band saws - half-automatic - cutting range from 420mm for sale (50)

Condition: new, Year of construction: 2025, cutting diameter 550 mm saw band length 6850 x 41 mm cutting width 1,3 mm Control Halbautomatisch Cutting area - square 550 x 550 mm Cutting area - flat 550 x 700 mm total power requirement 4 kW / 1580 Nm kW weight of the machine ca. 3775 kg dimensions of the machine ca. 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Chjdpfxsuddkdj Aflsf Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm Chodpfx Afeupxupjljf band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), Year of construction: 2000, Band saw Pehaka - HS 1700 x 1700 Hydraulic end electronic sawblade tension Laser line guiding  Chip conveyor   Driven Brush for brush cleaning  Support table 2180 x 1800 mm  Table 9 x T 22 with 200 jump Table load 35 ton Table height 600 mm   Bandsaw for large material dimensions like: Slabs Ingot Moulds Forged Shafts Open-Die Forgings Marine Shafts Shafts for Turbine Solid material pipe / Bar / profiles Cjdowwr Nfopfx Aflohf Capacity 90°: 1700° Circle blade size:11880 x 54 x 1,6mm Power: 20kW Chip conveyor: Yes Length: 5620mm Width: 2450mm Height: 3500mm Weight: 18000kg

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min Cedpfx Afsrl Irvjlshf - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 5,780 mm, saw band width: 41 mm, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, input voltage: 400 V, cutting range square steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Cjdpovy Swisfx Afljhf Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: used, Year of construction: 2009, Used Danobat CP 11.11 band saw Few hours in good condition, fully functional. model: CP11.11 Serial No.: Csdpfx Afewkrxyjlohf Year: 2009 Power in kW: 16 Mass in KG: 10800 Voltage in V/Hz: 415 / 50

Condition: excellent (used), Stock number: 3002 Manufacturer: Behringer Type: HBP 650 Year of manufacture: approx. 1990 Codpfx Afowu Dz Iolshf Cutting range 90° round: 650 mm Square: 650 x 650 mm Saw blade: 8,800 x 50 x 1.6 mm Cutting speeds: 18 to 90 m/min, steplessly adjustable Fixed jaw: 900 x 420 mm Movable jaw: 240 x 420 mm Opening: 800 mm Equipment: roller table 2,000 x 1,200 x 750 mm Condition: very good Connection: 12 kW Weight: approx. 6 t Dimensions: 4,000 x 1,400 x 2,900 mm

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsaw machine with double column guidance and 2° cutting inclination to the table support surface make: HUVEMA - BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm Codpfxjbw H T Ds Aflohf saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-240014, This Voortman band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,000 mm. This horizontal band saw is designed for miter cutting on both sides. Cedpfer Hrrlsx Aflehf The profile length to be processed (X-axis) is positioned in the band saw using a measuring carriage.

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning Cjdpfx Aom Rg H Rjfljhf - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: new, Fastech Horizontal Double Miter Band Saw Semi Automatic BMSY 440 DGH Round cutting range: mm 440 Flat Cutting range: mm 610 x 440 Square Cutting range: mm 440 +30 ° Round Cutting range: mm 400 +30 ° Flat Cutting range: mm 500 x 440 +30 ° Square Cutting range: mm 440 +45 ° Round Cutting range: mm 440 +45 ° Flat cutting range: mm 410 x 440 +45 ° Square cutting range: mm 410 +60 ° Round Cutting range: mm 320 +60 ° Flat cutting range: mm 250 x 440 +60 ° Square cutting range: mm 250 -30 ° Round cutting range: mm 440 -30 ° Flat cutting range: mm 500 x 440 -30 ° Square cutting range: mm 410 -45 ° Round Cutting range: mm 410 -45 ° Flat cutting range: mm 410 x 440 -45 ° Square cutting range: mm 410 -60 ° Round cutting range: mm 320 -60 ° Flat cutting range: mm 285 x 440 -60 ° Square cutting range: mm 285 Engine power main drive: kW 3 Hydraulic pump power: kW 0,55 Engine power coolant pump: kW 0,12 Belt speed: stepless m/min. 20 - 100 Saw band dimensions mm 5200 x34 x 1,1 working surface height: mm 860 weight: kg 1540 length / depth / height: mm 2800 / 1210 / 1870 Double miter saw Infinitely variable band speed, hydraulic vice sensitive cutting pressure regulation High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for miter angle Chedpfx Ajhpil Eofljf

Condition: good (used), Year of construction: 1998, Serial no.: 6019 109 048, cutting width 420 mm, infeed and outfeed roller conveyor, workpiece feed, coolant supply Csdewyw Tbopfx Aflshf

Condition: new, Year of construction: 2025, Standard equipment: MEBA – Power Package Stepless, hydraulic cutting pressure- and feed regulator Display of lowering speed via scale Display of cutting pressure via manometer Rapid lowering of the saw frame via button until material edge NC-Mitre capacity 30° - 150° (+/- 60°) Hydraulic full-stroke material clamping Modern, vibration damping saw frame guidance through 2-column linear guidance Powerful AC saw blade drive with high efficiency and low energy consumption Inclination of saw blade to vice bed approx. 3° Height setting of saw frame passage Saw blade drive with stop at end of cut Movable saw blade guide for adjustment according to material width Combined precise saw blade carbide-roller guidance Saw blade tension hydraulically with pressure-release (stand still of machine) Saw blade cleaning brush Exclusively MEBA micro sprayer Monitoring of saw blade motion and saw blade breakage Electronic SPS-control Material clamping always closest to bandsaw blade Material and shortest remaining pieces Control panel separately mounted Colour silver grey / blue grey (RAL 7001 / RAL 7031) Chodpebnkk Ssfx Aflof Instruction manual and spare parts list on CD-ROM Ausfuehrung Halbautomat Cutting dimension 90° Ø 510mm; square 1100x500mm 30° left, Ø 450mm, square 450x500mm 45° left, Ø 510mm, square 700x500mm 30° right, Ø 450mm, square 450x500mm 45° right, Ø 510mm, square 700x500mm Motor:[kW] 9,0 Saw blade: [mm]9300x54x1,6 Speed: 15-150 m/min Working height:[mm] 630

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 201224, cutting speed: 110 mm/min, Used band saw Type: Semi-automatic *This machine was initially automatic, it has been modified to be semi-automatic. Cutting capacities: 90º round, 15º left-right, 30º left-right, 45º left-right: 410mm. Square at 90º: 850x400mm Square at 15º left-right: 800x400mm Square at 30º left-right: 700x400mm Square at 45º left-right: 550x400mm Minimum cutting capacity: 10mm / 10x8mm Minimum cutting length: 35mm Cutting speed: 17-110m/min. Chedpfx Afeuc Tpaslef Drive motor power: 7.5kw Hydraulic pump motor power: 5.5kw Actions from control panel: Rotation to degrees. Saw drive Drive forward and backward the feed rollers. Raise and lower clamp clamps. Open and close clamp Machine being overhauled. Request operating video.

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Chodsfh R Tuspfx Afljf Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: good (used), Year of construction: 1989, Technical specifications Chodsv Tzzkspfx Aflof Ø: 1100 mm Rectangular: 1230 x 1100 mm

Condition: new, Year of construction: 2025, Semi-automatic CORMAK S440R band saw. Its arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm. Machine features Semi-automatic band saws, after being switched, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Machine's arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm. Technical data Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base from ground distance 780 mm Cutting band dimensions 5200×34×1.1 mm Total power 4.4 kW Band speed 20/90 m/min Dimensions (L×W×H) 2500×1900×1450 mm Weight 1100 kg Max. cutting range [mm] Angle 0º ø450 620×440 610×440 450×450 45º R ø440 500×190 360×440 420×420 45º L ø440 510×180 460×390 390×390 60º R ø330 330×170 170×440 300×300 60º L ø350 350×170 330×310 310×310 Standard equipment PLC controller Semi-automatic operating cycle Control console on a separate component Control panel with an LCD display Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Chsdpfxei Dx R No Aflsf Arm position memory function (arm returns to a defined height after cutting) Hydraulically controlled vice's jaws (long stroke cylinder with position memory) Cutting at angles of L/R 60o – 45o – 0o – 45o – 60o Digitally displayed set cutting angle Smooth band speed adjustability (inverter) Powered brush for cleaning the band Cooling system Bi-metal saw blade EC Declaration of Conformity User manual For more information please visit our web page or contact us.

Condition: new, Year of construction: 2025, cutting speed: 80 mm/min, cutting width (max.): 1,100 mm, cutting height (max.): 700 mm, warranty duration: 24 months, power: 7.5 kW (10.20 HP), PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL ROUND MAXIMUM DIAMETER: 700MM RECTANGULAR MAXIMUM DIAMETER: 700X1100MM SQUARE MAXIMUM DIAMETER: 700X700MM STANDARD MOTOR DRIVEN TABLE COLUMN TYPE SEMI-AUTOMATIC VARIABLE SPEED CONTROL PRECISION HEAD LANDING SYSTEM Codpfjvzh Dujx Aflshf ASK FOR A QUOTE FOR MORE DETAILS.

Condition: good (used), Year of construction: 1999, Technical specifications Codpfxjv Tzxvo Aflohf Ø: 1100 mm Rectangular: 1300 x 1100 mm

Condition: new, Year of construction: 2025, CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. Machine description CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. CORMAK H-50/70 semi-automatic band saws, after being switched on, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Manual handling of the machine is simplified to feeding material towards the bumper. Solid uniform cast iron arm along with the refined, stable design ensure that CORMAK H-50/70 is rigid and reliable, providing very precise cutting. Hydraulic band tension provides optimum cutting. In the case of band breakage the machine stops automatically. Precise guiding of the band is ensured by guides with bearings and cemented carbide inserts. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. Technical data Type Semi-automatic Arm raising and lowering Hydraulic, with stepless lowering adjustment Band speed 26/41/66 m/min Vice Hydraulic Cutting band dimensions 41×1.3×6430 mm Total power 8 kW Dimensions 3200×1100×2100 mm Weight 2900 kg Maximum cutting range [mm] Angle 0º ø500 500×700 Default equipment Control panel at the front of the machine Semi-automatic work Chjdpfx Afeizi T Eelef Built-in hydraulic unit Arm position memory function Brush for cleaning the band Hydraulic band tension Semi-automatic work Hydraulic band tension Cooling system Bi-metal cutting band EC declaration of conformity User manual

Condition: new, Year of construction: 2025, saw band length: 7,780 mm, saw band width: 54 mm, cutting speed: 80 mm/min, cutting width (max.): 1,050 mm, cutting height (max.): 580 mm, warranty duration: 24 months, power: 4,500 kW (6,118.29 HP), STANDARD FEATURES ·      HYDRAULIC VICE ·      COLUMN - LINEAR SLIDE ·      VARIABLE SPEED CONTROL (INVERTER) ·      SAFETY SWITCHES ·      HYDRAULIC SLIDE TENSIONING Chodpfx Aevyycmofljf ·      VARIABLE ANGLE CUTTING BETWEEN 0 AND 60 DEGREES (POSITIVE DIRECTION) ·      VARIABLE ANGLE CUTTING BETWEEN 0 AND 45 DEGREES (NEGATIVE DIRECTION) ·      ANGLE SCALE ·      ADJUSTABLE HEAD LANDING SYSTEM ·      1 PIECE SAW BLADE ·      1 PIECE 2MT MATERIAL CARRYING TABLE ·      24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY ·      COUNTRY OF ORIGIN: TURKEY ·      MODELS PRODUCED BETWEEN 220 MM DIAMETER – 3000 MM DIAMETER TECHNICAL SPECIFICATIONS 580X1050 SY2DG Capacity 90° (mm) Capacity 90° (mm)  Round Round 580 mm Square Square 580 x 580 mm Rectangle Rectangle 580X1050 MM Capacity 60° (mm) Capacity 60° (mm) Round Round 480 mm Square Square 410 mm Rectangle Rectangle 300 x 530 mm Capacity 45° (mm) Capacity 45° (mm) Round Round 580 mm Square Square 580 x 580 mm Rectangle Rectangle 580 x 670 mm Main Motor / Torque Main motor / Torque 5.5 kW Hydraulic Motor Hydraulic Motor 1.1 kW Coolant Motor Coolant Motor 0.09 kW Band Saw Blade Size Blade Size 54x1.3x7780 mm Material Feeding Height Feeding Height 655 mm Vice Maximum Opening Vice Maximum Opening 1050 Vice Maximum Closing Vice Maximum Closing Table Width Rolled Table Width Height-Width-Length 3780x2240x1980 mm Weight 4100 KG

Condition: good (used), Year of construction: 2002, Technical specifications Ø: 700 mm Cjdev Tzvhspfx Afljhf Rectangular: 800 x 700 mm

Condition: new, Year of construction: 2025, cutting width (max.): 1,600 mm, cutting height (max.): 1,100 mm, warranty duration: 12 months, power: 7.5 kW (10.20 HP), STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1100 CAPACITY SQUARE (MM) 1100X1100 CAPACITY RECTANGULAR (MM) 1100X1600 SAW SIZE (MM) 67X1.6X11630 SAW SPEED (M/MIN) 20 – 80 MAIN MOTOR (KW) 7.5 HYDRAULIC MOTOR (KW) 1.5 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 Chjdpfxovvcp Ue Aflsf FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 535 MACHINE DIMENSIONS (MM) 5390X1760X2875 WEIGHT (KG) 8000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION

Condition: good (used), Year of construction: 2006, Technical specifications Ø: 400 to 1000 mm Rectangular: 100 x 400 mm to 1000 x 1100 mm Chodpfx Asv Tztyjflsf

Condition: new, Year of construction: 2025, cutting width (max.): 2,500 mm, cutting height (max.): 1,500 mm, warranty duration: 12 months, power: 11 kW (14.96 HP), STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1500 CAPACITY SQUARE (MM) 1500X1500 CAPACITY RECTANGULAR (MM) 1500X2500 SAW SIZE (MM) 80X1.6X15650 SAW SPEED (M/MIN) 20 – 80 Cedpfovvcpzsx Afljhf MAIN MOTOR (KW) 11 HYDRAULIC MOTOR (KW) 2.2 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 600 MACHINE DIMENSIONS (MM) 7500X2150X3440 WEIGHT (KG) 21000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION