Used beverage production for sale (1,112)

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface Ndedpfxjzy Ud Io Aazeb - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2019, Overview Set of three cylindro-conical fermentation tanks built by Shandong Tiantai in 2019 - two of 1,000 litres and one of 7 BBL (approx. 820 litres). All three vessels are built in stainless steel SS304, rated for 4-5 bar working pressure and fitted with a cooling jacket with glycol inlet and outlet, a level gauge, an inward-opening side manway and a bottom outlet valve. The tanks stand on welded legs and are still installed at the site in Spain, where they can be viewed by appointment. A compact fermentation block for a craft brewery adding or replacing tank capacity. Technical data - Year of manufacture: 2019 - Units: 3 tanks - 2 x 1,000 L and 1 x 7 BBL (approx. 820 L) - Dimensions (approx.): Ø1210 x H2550 mm (1,000 L tanks), Ø1060 x H2550 mm (7 BBL tank) - Material: stainless steel SS304 - Design: cylindro-conical, isobaric pressure vessels on welded legs - Working pressure: 4-5 bar - Cooling: cooling jacket on every tank, glycol inlet and outlet - Fittings: level gauge, inward-opening side manway, bottom outlet valve Scope of Delivery Nodpfez Atq Ssx Aazedb - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 7 BBL (approx. 820 L) | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 Condition Used, still installed at the current site. Viewing possible by appointment. Availability Immediately available.

Condition: used, Year of construction: 2009, Overview Complete PET line for sparkling mineral water and soft drinks. A SIDEL SBO 20 Universal Combi blows, fills and caps up to 30,000 bottles per hour in one block; Krones labelling, shrink packing and palletising complete the line down to the finished pallet. The Combi was built in 2005 and started production in 2006. The Combi stands in Belgium, the downstream machines in Germany. All machines are still installed and can be inspected by appointment. Technical data - Output: up to 30,000 bph (maximum filler speed), 28,000 bph in current production - Containers: 1.0 l, 1.25 l and 1.5 l PET bottles - Products: sparkling mineral water and flavoured sparkling water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Blow moulds are not included Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, linear oven with 24 heating modules, preform feeder, PCC drive, transfer to the filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, 42,000 bph | 2005 - Carbo-Mixer | SIDEL | CARBO-L-D 580/60 | Double-stage deaeration including PFM inline flavour dosing 45 m³/h, max. 60,000 l/h | 2005 - Bottle Conveyor | Single-lane conveyor at the Combi exit - Container Conveyors | SYNCO S | Ground floor and platform level - Fill Level Inspection | Krones | CHECKMAT 731 FM-X+L | 2009 - Inkjet Coders | Domino | DDC 3 | Best-before date coding, two coders - Drying System | Europool | FM TF-02 - Labelling Machine | Krones | CONTIROLL HS 720-15 | Wrap-around labels from the reel | 2009 - Label Inspection | Krones | CHECKMAT 731 EM | 2009 - Tray and Shrink Wrapper | Krones | VARIOPAC PRO FS | 2009 - Tray Coding System | WOLF - Tray Transport System | MULTICO S - Palletiser | Krones | MODULPAL 1A | 2009 - Pallet Transport System | PALCO S Condition The Combi is in good working condition and in production; it is maintained annually by the in-house team and, where required, by SIDEL. Its driving panels and computer, electrical and mechanical drawings, manuals, spare parts books and all available spare and format parts are included. The equipment is sold as it stands and is to be dismantled. Nodpfx Aasz Dih Hozjdb Availability The Combi runs until 27 November 2026; dismantling is planned for week 49/2026. The line is available from December 2026.

Condition: used, Year of construction: 2017, Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data - Manufacturer: Jakü - Model: EGA-CARBO - Year of manufacture: 2017 - Machine type: deaeration and carbonation unit for water - Capacity: 120 - 12,000 l/h - Components: water, CO2 - Electrical supply: 400 V, 50 Hz - Installed power: 16 kW - Rated current: 50 A - Operating hours: approx. 1,500 h Equipment - Vacuum deaeration of the water - CO2 carbonation with manual CO2 dosing - Two vertical stainless steel vessels - Pumps on a stainless steel base frame with adjustable feet Ndsdpez A Dbrofx Aazsb - Stainless steel control panel with push buttons, indicator lamps and digital displays Condition Used, approx. 1,500 operating hours. The unit is already out of service and ready for collection. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 Ndedpez Eivysfx Aazeb - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: used, Year of construction: 2002, Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: Twin Pack - Year of manufacture: 2002 - Machine type: handle applicator for beverage multipacks - Line output: 20,000 - 30,000 bottles/h depending on format - Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l - Control: Siemens text operator panel Equipment - Handle application unit with tape reels on a blue steel frame above the pack conveyor Ndjdjz Elmhopfx Aazeb - Control panel with separate start, stop and reset for the front and rear sections, emergency stop - Guarded enclosure with transparent doors Condition Still installed and under power. An inspection on site is possible. Availability Available from 31 October 2026. Location: Germany.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Ndsdpezza Disfx Aazjb Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Njdjz Dtndjpfx Aazsdb Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Sizes: 15L, 20L, 30L, 50L 60L Keg Palletiser System also available. Ndodpfoxcinmox Aazeb Location: Dublin Please contact Indassol for further details & pricing.

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC Nsdpfez D Aw Uex Aazjdb - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Operating manual, wiring diagrams and further technical documentation The pallet conveyor is not included in the sale. Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator Nsdpfozxnu Djx Aazedb - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 2012, Overview Complete Krones PET line from 2012 for carbonated water in non-returnable PET bottles of 0.5 L, 1.0 L and 1.5 L, rated at 16,000 bottles/h on the 1.5 L format. The line runs from preform feeding through a blow moulder-filler-capper bloc in a clean room, beverage treatment and CIP, inspection, drying, coding and wrap-around labelling, to shrink-film packing with handle application, palletizing and stretch wrapping. A separate sleeve section with sleeve labeller, steam shrink tunnel, inspection and two dryers is included. Technical data - Year of manufacture: 2012 - Output: 16,000 bottles/h (1.5 L) - Product: carbonated water - Bottles: PET, 0.5 L, 1.0 L and 1.5 L - Labeller: up to 20,000 bottles/h - Packer, palletizer and stretch wrapper: up to 24,000 bottles/h - Packs: shrink-film packs with carry handle, 3x2 and 4x3 - Pallets: 800 x 1200 mm and 1000 x 1200 mm - Electrical: 380/220 V, 3/N/PE, 50 Hz Scope of Delivery - Preform feed unit | Krones | CONTIFEED | with tilting device for the preform hopper | 2012 - Preform interior cleaning | Krones | PREJET | 2012 - Stretch blow moulder | Krones | CONTIFORM S8 | 16,000 bottles/h (1.5 L) | 2012 - Filler-capper | Krones | MODULFILL VFS | 60 filling valves, 16,000 bottles/h (1.5 L) | 2012 - Clean room | Krones | for the blow moulder-filler-capper bloc | 2012 - Closure conveyor | Krones | 2012 - Beverage treatment | Krones | CARBOFLOW | 2012 - CIP system | Krones | VARIOCLEAN | 30 m³/h | 2012 - Container conveyors | Krones | SYNCO | 2012 - Inspection machine | Krones | CHECKMAT 707 | 2012 - Container dryer | Krones | LINADRY | 2012 - Container coding | Videojet | inkjet coder | 2012 - Labelling machine | Krones | CONTIROLL COMBI | wrap-around OPP labels, up to 20,000 bottles/h | 2012 - Inspection machine | Krones | CHECKMAT 731 | 2012 Ndedpfoz Dw Uuox Aazob - Sleeve labeller | Krones | SLEEVEMATIC | 2017 - Steam shrink tunnel | Krones | SHRINKMAT - Inspection machine for the sleeve section | Krones | CHECKMAT - 2 container dryers for the sleeve section | Krones | LINADRY | 2017 - Pack conveyors | Krones | MULTICO | 2012 - Shrink-film packer | Krones | VARIOPAC PRO FS | 3x2 and 4x3 packs, up to 24,000 bottles/h | 2012 - Handle applicator | Krones | VARIOSTICK | 2012 - Palletizer | Krones | MODULPAL | 800 x 1200 and 1000 x 1200 mm pallets, up to 24,000 bottles/h | 2012 - Pallet conveyors | Krones | PALCO | 2012 - Stretch wrapper | Robopac | 2012 - Electrical power distribution for the line | Krones | 2012 Condition Dismantled and stored. Inspection on site by appointment. Availability Available immediately. Location: Georgia.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Nedoz D Hmmspfx Aazjdb Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: used, Year of construction: 2021, Overview This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Ndodpfszk U Eyjx Aazob Availability Available now. Location: Spain.

Condition: used, Year of construction: 2021, Overview This SPEIDEL Braumeister 500 is a compact single-vessel electric brewhouse with 500 L (5 hL) batch volume, built in 2021 by Speidel Tank- und Behälterbau GmbH (Ofterdingen, Germany). Mashing, lautering and wort boiling take place in one stainless-steel kettle: the removable malt pipe with perforated base screens and filter cloth holds the grain bed, while the integrated 18.4 kW electric heating elements and wort circulation manage the temperature steps. The brewhouse produced beer at a craft brewery in France until November 2025. It is dismantled, stored and immediately available. Technical data - Manufacturer: SPEIDEL Tank- und Behälterbau GmbH (Ofterdingen, Germany) - Model: Braumeister 500 (Art. no. 46500) - Year of manufacture: 2021 - Machine type: single-vessel electric brewhouse (malt pipe system) - Batch volume: 500 L (5 hL) - Heating power: 18.4 kW (electric) - Power supply: 400 V, 3-phase, 50/60 Hz - Protection class: IP 43 - Application: beer - Dimensions: approx. 120 x 126 x H 150 cm - Weight: approx. 377 kg Equipment - Removable malt pipe with perforated base screens and filter cloth - Stainless-steel lid - Integrated electric heating elements and wort circulation Ndedpfx Asznd Ewoazeb Condition Used - in beer production until November 2025, last maintenance November 2025. The machine is dismantled and stored. Availability Immediately. Location: France. Handling and truck loading are included (EXW loaded). The machine can be visited on request.

Condition: used, Year of construction: 2021, Overview This Twin Monkeys Cimarron is a compact automated canning system (monobloc can filler + seamer), built in 2021 by Twin Monkeys Beverage Systems (Denver, USA) and distributed and serviced in Europe by Agrovin. Designed for craft breweries, it fills and seams standard 0.33 L and 0.44 L beverage cans at up to 3,000 cans per hour in its current single-lane configuration. Cans run through a fully automatic cycle: air purge, filling, lid application under CO₂ and seaming. The low-oxygen filling system works with a fill tolerance of ±2 g and dissolved-oxygen pickup as low as 20 ppb; a wedge-style seamer (patent pending) closes the cans. All parameters are managed on the color touch-screen PLC, including automatic CIP wash cycles, cycle counters and operator help screens. The machine is still installed and in production and can be seen in operation. Technical data - Manufacturer: Twin Monkeys Beverage Systems (Denver, USA) - Model: Cimarron - Year of manufacture: 2021 - Machine type: automated canning monobloc (can filler + seamer) - Capacity: up to 3,000 cans/h in the current single-lane configuration - Can formats: standard 0.33 L and 0.44 L (Ø 66 mm); Slim / Sleek formats (Ø 52.8 mm) possible with optional change parts - Filling accuracy: ±2 g; dissolved oxygen as low as 20 ppb - Control: color touch-screen PLC incl. automatic CIP cycle - Compressed air (clean, dry): 90 psi / 4.5 cfm (approx. 6.2 bar / 127 L/min) - CO₂ supply: 20 psi / 1.0 cfm (approx. 1.4 bar / 28 L/min) - Materials: stainless steel AISI 304, anodized aluminium, technical plastics - Dimensions (L x W x H): approx. 2,000 x 875 x 1,860 mm - Weight: approx. 330 - 430 kg (depending on configuration) - CE marked Equipment - Fully automatic air purge, filling, lid application with CO₂ injection and seaming - Wedge-style seamer (patent pending) - Lid applicator with CO₂ curtain to minimise oxygen pickup - Product tank with automatic pressure regulation - Rejection of defective cans - Rotary accumulation table at the discharge (included, see photos) - Mobile stainless-steel frame on lockable casters - Expandable platform: additional filling heads can be retrofitted (manufacturer rating up to 6,000 cans/h with 10 heads) Nodpfx Ajzktv Reazedb Condition Used - good working condition, built 2021. The machine is still installed and in regular production use at the current owner's site and can be visited and seen in operation by appointment. Availability Expected availability: April - May 2027 (the machine remains in production until then). Location: Spain.

Condition: used, Year of construction: 2020, Overview Njdpfxjxb S A De Aazsdb This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data  - Capacity: 10 hL brewhouse, up to 2 batches per day - Formats: Beer, up to 20° Plato initial density - Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) - Power supply: 5.5 kW - Air supply: 6 bar - Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra ≤ 0.4 μm) - Heating: Steam - Features: CIP rotary ball, sparging arm, thermowell, motor with frequency conversion, grain raker, top manhole with sight glass, laser-cut false bottom, side grain door and chute, adjustable legs Scope of Delivery  - Brewhouse 10 hL | Shandong Yuesheng | 1000L | 2020 | 2 vessels (mash/lauter, kettle/whirlpool) - Hot water tank | Shandong Yuesheng | – | 2020 | 20 hL capacity - Heat exchanger | Shandong Yuesheng | – | 2020 | 10 m² surface - Pumps | Shandong Yuesheng | – | 2020 | 1 hot water pump, 1 wort pump - Platform with access | Shandong Yuesheng | – | 2020 | Stainless steel construction - Steam generator | Shandong Yuesheng | – | 2020 | 150 kg/h

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Ndjdjzk U E Tjpfx Aazjb Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Machine: SARTORIUS 345034-E Modulfilter 3 x 4 x 16" Jumbo Nedez A Dkmjpfx Aazsdb

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Njdeyb R Iaspfx Aazodb - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) - Glycol chiller for CCTs - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) Nodpfxjyigigj Aazjdb - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets - Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data - Capacity: approx. 12,000 bottles/hour - Formats: up to 3 L PET bottles Njdpfx Aoyybkdjazjdb - Application: PET bottle production - Configuration: Rotary stretch blow moulding machine, 6 cavities - Neck finish: PCO 1881 Scope of Delivery - Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds - Preform feeding system  - Chiller unit  - Air conveyor system  - Control system | Integrated HMI

Condition: used, Year of construction: 1990, Overview Ndjdpfx Ajz D S Sbjazjb This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2021, Overview This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  Ndsdpezh Il Iefx Aazjb - Capacity: 1,200 kg/hour - Application: Fruit juice - Configuration: Belt press - Operating hours: 200

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Nedpfx Aexnmv Eeazjdb Technical data  - Capacity: - 2,000 cans/hour at 0.33 L - 1,500 cans/hour at 0.5 L - Compatible formats: Standard and Sleek cans (not suitable for Slim cans) - Filling system: Isobaric (for carbonated products) - Product types: Beer, cider, soft drinks, or similar beverages - Condition: Used – as new (only 1,500 cans filled)