Used beverage production for sale (1,066)

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors Iodpfx Asxch Acjbvoap

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Iaodpfjwkfwpsx Abvsp

Condition: used, Year of construction: 2020, Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  Output: 2,000 bottles/hour Different bottle shapes possible as the height and width can be adjusted Bottle volumes from 0,5l to 3,0l are possible Last used for: Spirits, can also be used for other liquids Scope of delivery  Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) Borelli Capper for T-cork Conveyor belts Lantech C-300 carton erector (2021) Iasdpfswqpkajx Abvjp

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Iasdpfewq Sfgsx Abvjp

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW Ijdpfxswgyx Tj Abvjap

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Control functions: Pre-sorting (Heuft Spectrum SX TB 72): Bottle shape Bottle height Inspection (Heuft InLine reflexx Release 9): Side wall inspection (inlet & outlet) Mouth & thread inspection Bottom inspection Residual liquid detection (IR/HF) Label residues in the neck area Test bottle detection Scope of delivery Heuft InLine reflexx Release 9 Heuft Spectrum SX TB 72 (pre-sorting) Heuft Gateway II (network connection) Rejection table and piece of infeed and outfeed conveyor Rejection of defective bottles Isdewr Aadopfx Abvjap

Condition: used, Year of construction: 2002, Overview This KM 790/5K crate decapper was manufactured by Rink in 2002. The machine can be inspected at any time and is immediately available.  Technical details Output: approx. 2,800 crates/h (6K), approx. 2,040 crates/h (4K) Format parts: 5x centering plates for 0.7l GDB 5x centering plates for 0.75 Gastro 3x centering plates for 0.5l GDB/0.5l Euro Crate conveyor speed: 0.6 m/s Crate guide: All crates are moved lengthwise through the machine Noise level: 83 dB(A) Space requirement (LxW): 4,100 x 1,260 mm Working area: min. 1,500 mm on the operating side Hydraulics: Working pressure 150 bar, residual pressure 35 bar Pneumatics: Air consumption approx. 5.2 m³/h at 5 bar; operating pressure min. 5 bar, max. 10 bar; connection size ½" Electrical: Operating voltage 230/400 V; control voltage 24 V; power 12.0 kVA; frequency 50 Hz; fuse protection 3 x 25 A min.; supply line min. 2.5 Control: PLC control Siemens S7-300, HMI Simatic OP7 Iodpfx Aew Nk E Iebvjap

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Isdpfewh U Avjx Abveap

Condition: used, Year of construction: 2004, Overview The empty bottle inspector was built in 2004 by the German manufacturer Miho, designed for quality control in filling lines. The machine was running until January 2025 and is now stored in the company. Technical details Output: 25,000 bph Working direction: Left - right Last used for: 330 ml Longneck glass bottles (green) 330 ml Longneck glass bottles (brown) 330 ml Steinie glass bottles 330 ml Swing top glass bottles 500 ml NRW glass bottles Inspection modules Bottom inspection Sealing surface inspection Side wall inspection Residual liquid and residual caustic detection Iasdpfjwhv T Aox Abvep

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Rico. The machine was running until January 2025 and is now stored in the company. Technical data  Capacity: 20,000 bottles/h  Formats: 0.33 l Swing-top glass bottle 10 capping stations  Running direction: clockwise Operation via OP17 Control system: Siemens S7  High pressure injection system Locking pressure control Isdpfowhwtqox Abvoap

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Iajdewhw Sgspfx Abvjp

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle plates: 42 Bottle rotation in carousel: Mechanical Guide star diameter: 690 mm Labelling stations: 2 x Cold glue labelling stations 8 glue pallets 9 gripper positions Automatic magazine feeding Scope of Delivery  1 x Labelling Machine | HEUFT | TORNADO | 2005 Including: 2 x Integrated Laser Coders | Bluhm Complete labelling setup with format parts for 11 bottle formats Cold glue stations, glue pallets, gripper arms, and automatic magazine Technical documentation Iajdpfx Abswd Uk Sevop

Condition: used, Year of construction: 2019, Overview  This fill level inspection machine was manufactured in 2019 by German company HEUFT. It is designed for checking the fill height and closure of full bottles. The system is available immediately and still installed. A personal inspection is possible on site. Technical data Capacity: up to 72,000 bph Formats: 75 cl Inspection features: Fill level and cap control Scope of Delivery  Fill level inspection system | HEUFT | PRIME | 2019 Reject system | HEUFT | DELTA-FW | 2019 Bottle conveyor (10 meters) Iaodpjwfq Ntefx Abvsp

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  Capacity: up to 10,000 bottles/hour Bottle formats: 330 ml, 500 ml, 750 ml Bottle height range: 50–360 mm Bottle diameter range: 40–160 mm Label length range: 30–140 mm Rotation direction: Clockwise Number of bottle plates: 10 Number of labelling stations: 1 Air consumption: 125 L/min Power consumption: 17.3 kVA, 400 V Working height: 1,100 ± 50 mm Construction: Stainless steel frame, enclosed safety housing Control system: Micro PLC with touch-screen for speed, production, and fault management Key features: Cold-glue labelling head with oil-bath lubricated mechanisms Central carousel with centering bases for precise bottle positioning Pneumatic heated pump for adhesive circulation and return system Automatic bottle synchronization with infeed screw to prevent breakages Micrometric glue adjustment to reduce film thickness and ensure clean labelling Bottle retainers for smooth handling and reduced congestion Gear-driven transmission with clutch and emergency stop system Compact, fully enclosed design for hygiene and safety   Iaedpfexl Di Dox Abvep

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction Iaedpfx Aoxn A R Ejbvop

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Iajdpfx Asxn A S Nsbvsp

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  Capacity: Up to 150 bottles/min Operation: Continuous from bulk hopper feed Bottle types: Plastic (PET, HDPE, etc.) Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) Bottle orientation: Bottom-first via pneumatic flipping device Machine direction: Left to right Working height: 900 mm Frame: Welded, stainless steel (AISI 304) Sort drum diameter: 1,500 mm Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access Electrical supply: 3 × 400 V, N, PE, 4 kW Compressed air: 400 Nl/min at 6 bar Machine guarding: Polycarbonate panels Safety: Error detection with clear text display Condition: As new (used for demonstration only) Warranty: 12 months manufacturer warranty Iajdjxqpk Dopfx Abvop

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Iedpfxjxqzmwo Abvsap

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Iedpexrc Acsfx Abvsap

Condition: used, Year of construction: 2016, Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm Iajdsw Inpujpfx Abvjp

Condition: used, Year of construction: 2017, Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery  1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) 1x glycol cooler 1x plate heat exchanger Iodpfxsyb R Its Abvoap

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational Isdjyb Si Sjpfx Abveap

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with standard bottle formats Ijdoyb Sxaspfx Abvsap

Condition: used, Year of construction: 2012, Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 | Horizontal isobaric with carbonation stones Iodpfx Absyb S A Sjvjap

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new Iaedpsyb S Dvjfx Abvop