Used beverage production for sale (1,130)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Gsdozzz Ivjpfx Aansbw Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm Gbodpfxezzz Nao Aanjw - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Gbsdozlqu Tspfx Aanjw Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2007, Overview Gbsdpfx Aaszh Ifusnew This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 2015, Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data - Capacity: - approx. 1,200 bottles/hour (standard labels) - up to approx. 1,500 – 1,800 bottles/hour (small labels) - approx. 1,100 bottles/hour (front and back from one roll) Godpfx Aaey Hkghenobw - Formats: Diameter 50 – 100 mm, conical bottle shapes - Application: Bottle labelling (beverage, wine, spirits) - Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll - Label positions: Front, back - Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table

Condition: used, Year of construction: 2002, Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: Twin Pack - Model: MDEL - Machine type: Handle applicator (carry handle machine) - Year of manufacture: 2002 - Application: Application of carry handles for beverage multipacks - Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Gedpfsy Hkhfjx Aanobw Equipment - Automatic carry handle application system - Suitable for various multipack configurations - Integration capability into existing bottling and packaging lines

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank - Application: Fermentation, maturation, storage of carbonated beverages Godpfxjy Hkkaj Aanjbw - Capacity: 500 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: up to 50 pallets/hour - Formats: - 1.5 L – 3×2 – 1200 × 800 - 0.5 L – 4×3 – 1200 × 800 - Application: PET - Configuration: Shrink hood applicator Gsdpfx Aoy Hmp Ejanobw

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 Gbjdpfxoz Eivyj Aanjw - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter Gbjdpfsz Dimpox Aansw - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2013, machine/vehicle number: LC695, Used AMOS filling line for natural juice 2500 Kg/hTechnical Specifications & Performance DataThis used bottling line is a complete processing and filling system for 100% natural juice production in Bag-in-Box packaging. Manufactured by AMOS in 2013, the line is designed to receive apples, prepare and press the fruit, filter and collect the juice, pasteurize the product and fill it into 3L and 5L Bag-in-Box bags.Manufacturer: AMOSYear: 2013Processing capacity: 2,500 kg of apples/hFilling output: 1,000-1,200 bags per 8 hours of operationPackaging formats: 3.0L and 5.0L Bag-in-Box bagsJuice storage: 2 tanks x 500LElectrical supply: 380V, 3-phaseAdvanced Automation & Control SystemsThe equipment is connected to the utility network and operates with electricity, water, compressed air and diesel for the pasteurization stage. The compressor supplies air to the press, pasteurizer and filler, supporting coordinated operation of the processing and filling stages. The line combines fruit handling, extraction, thermal treatment and Bag-in-Box filling in one integrated industrial packaging solution.Production Line Integration CapabilitiesThis complete juice processing line follows a logical production flow from raw fruit intake through filling and natural cooling of packed juice. It is suitable for producers seeking second hand equipment for natural juice processing, including apple and tangerine juice applications.Machine type/categoryManufacturer/modelYearCompressorGIS2013Various EquipmentVoranVarious EquipmentVarious EquipmentAMOS2013Various EquipmentFilterTankPasteurizerRinkTankFilling MachineOettel2013Various Equipment Gjdpfe Adtp Ijx Aanebw

Condition: used, Year of construction: 2001, machine/vehicle number: LC627, Used AVE OCEANIC-V filling line 12-12-1 2500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete AVE engineering solution designed for glass bottle oil filling and packaging. It delivers reliable performance for industrial packaging and beverage production environments seeking a second hand system with proven components.Production speed: up to 2,500 bottles/hour with 0.5L formatCompatible bottle formats: 0.25L, 0.5L, 0.75L square; 0.5L, 1.0L roundContainer types: Glass bottlesChange parts: Starwheels for 5 formats includedClosures: Aluminum screw caps 31.5mm and 35mm; heat-shrink capsules 31.5mm and 35mmPrimary models: AVE OCEANIC-V 12/12/1 filling monoblock; AVE 4T automatic rotary self-adhesive labeller (two stations)Monoblock key data (rinser/filler/capper): water consumption ≈ 200 L/h; air consumption 80 L/min; installed power 5 kW; absorbed current 13 A; weight 3500 kg; bottle running level 1100±50 mm; footprint approx. 3500 mm (L) × 1392 mm (W) × 2550 mm (H)Labeler key data (model 4T): air consumption 35 L/min; installed power 2 kW; weight 1000 kg; bottle running level 1100±50 mm; overall length 3000 mm; overall height 2000 mmAdvanced Automation & Control SystemsThe line integrates AVE control and electrical boards for centralized management of rinsing, filling, capping, capsuling, and labeling. Machine guarding with safety interlocks supports safe operation, while clearly marked utility connections simplify setup. Quick-change starwheels and guided adjustments support format changes across square and round bottles, reducing downtime and improving overall equipment effectiveness.Production Line Integration CapabilitiesThis complete bottling line is configured for inline operation with a monoblock rinsing-filling-capping system, a heat-shrink capsule applicator, and a rotary self-adhesive labeling machine with two stations for body and back labels. It is ideal for edible oil production on glass bottles in multiple formats and shapes. The standardized bottle running level (1100±50 mm) across modules simplifies conveyor alignment and integration with upstream and downstream handling equipment.Machine Condition & Maintenance HistoryThe line is presented as second hand industrial packaging equipment in good working condition and ready for operation. It has been configured and used for oil, with format parts included for five bottle formats. Components show consistent technical coherence across the system, characteristic of AVE manufacturing and design.Operational Performance & VersatilityEngineered for oil filling applications on glass containers, the monoblock ensures stable handling for both square and round bottles. The aluminum screw capping system handles 31.5mm and 35mm closures for a wide range of edible oil formats. The dedicated heat-shrink capsuling unit accommodates matching 31.5mm and 35mm capsules for a premium finish. The rotary self-adhesive labeler with two stations applies front and back labels with precision, supporting brand presentation and regulatory requirements.Installation Requirements... Gedpe Adty Tofx Aansbw

Condition: used, Year of construction: 2021, machine/vehicle number: LC604, Used Brewery for beer processing machine 5HLTechnical Specifications & Performance DataThis second hand 5 HL brewery brewhouse on skid is a compact, industrial-grade system engineered for small to medium-scale beverage production. Manufactured by BEOINOX, it integrates key process vessels and utilities for efficient wort production and fermentation management. The system is suitable for craft beer brewing and can be integrated with downstream packaging or a used bottling line.Batch capacity: 5 HL per brewBrewhouse vessels: Mash Tun 500 L, Lauter Tun 1000 L, Whirlpool 800 LUtility tanks: HLT 800 L, CLT 800 L, UnderbackFermentation: 2 × 1350 L fermentation vessels (FVs)CIP: Mobile CIP unit with 2 × 150 L tanksHeat exchanger: Two-stage plate heat exchanger (PHE)Pumps & pipeline: Process pumps and sanitary piping includedAeration: Aeration set includedControl: Integrated control systemModel/Code: .300.21-00Overall dimensions (approx.): Length 4503 mm, Width 2598 mm, Height 2200 mmAdvanced Automation & Control SystemsThe brewhouse is supplied with an integrated control system to manage key brewing steps such as mashing, lautering, wort transfer, and cooling. The two-stage PHE enables precise temperature control for wort chilling and process optimization. Pumping and pipeline circuits are designed for smooth transfers, while the aeration set supports consistent yeast pitching and fermentation starts. Safety interlocks and operator controls contribute to reliable daily operation within industrial brewing environments.Production Line Integration CapabilitiesThis skid-mounted brewhouse can operate as a standalone brewing unit or be integrated into a broader beverage production line. It interfaces seamlessly with fermentation, conditioning, and downstream packaging processes. The sanitary pipeline layout enables efficient transfer to FVs and onward to filtration or packaging. With its compact footprint, it can be paired with a used bottling line or kegging system to complete an end-to-end craft beer production setup.Machine Condition & Maintenance HistoryThe system is offered as a second hand unit in operational condition and ready for operation. Its sanitary, skid-mounted design simplifies cleaning and upkeep, while the included mobile CIP unit supports routine maintenance procedures for vessels, pipelines, and heat exchanger circuits.Operational Performance & VersatilityDesigned for beer production, the 5 HL brewhouse accommodates standard craft workflows including infusion mashing, lautering, wort boiling/whirlpooling, and rapid chilling. The two 1350 L fermentation vessels provide capacity for staggered batches and flexible production scheduling. The aeration set enhances yeast management and consistent fermentations, while the CIP system ensures hygienic operation and product quality.Installation Requirements & Site PreparationThe compact skid layout reduces installation complexity. Allow sufficient space for the indicated footpr... Gjdpfxe Adt N Io Aansbw

Condition: used, machine/vehicle number: LC547, Used Bottling Line for still wine 2000 bph The Used Bottling Line for still wine 2000 bph processes still wine in glass bottles and handles formats of 0.375 L, 0.75 L, and 1.5 L. The line delivers a performance of 2000 bottles per hour and operates entirely in a clockwise direction. Each machine is designed to ensure precision, compatibility, and reliability when handling still wine in glass containers. Moreover, the configuration supports a continuous and linear bottling process with minimal manual intervention. Microfiltration and feeding unit Gbsdpfx Aae Adyyaonjw The process begins with a mono screw pump equipped with a microfiltration system, manufactured in 1999. This pump directly feeds the filler and maintains consistent product flow. Specifically, the filtration unit includes three housings, each containing three filter cartridges, in addition to all required connectors. As a result, this module guarantees the microbiological safety of the wine before it enters the filling phase. Rinsing machine SBR 1R. 4. 12. 132 Next, the line passes through an SBR rinsing machine, model 1R. 4. 12. 132, also built in 1999. It features 12 grippers with fixed nozzles, and performs bottle rinsing using recirculated water. In particular, this unit supports Champagnotta (90 mm diameter), Borgognotta (80 mm diamater), and Bordolese (72 mm diameter) bottle diameters. Therefore, it ensures that every bottle reaches the filling station free of particulate and microbiological residue. Gravity filler Bertolaso Olimpia 12 After rinsing, the bottles move to a Bertolaso Olimpia 12 filler, a gravity-based unit with 12 filling nozzles built in 1999. This machine operates with slight vacuum assistance, ensuring gentle product handling. Notably, it accommodates multiple formats, including half bottle (63 mm diameter), Bordolese, Borgognotta, Champagnotta, and Magnum (110.5 mm diameter). Consequently, the machine offers flexibility in batch production. In short, the filler guarantees accurate volume control and clean filling cycles tailored for still wine. Capping units for crown and straight corks in the Used Bottling Line for still wine The Used Bottling Line for still wine 2000 bph features two separate capping modules. First, the Bertolaso Alfa 110 applies 29 mm crown caps using a single-head system. Operators can adjust the height manually, and the machine works without vacuum pre-treatment. For example, it seals Champagnotta and Magnum spumante bottles efficiently. Second, the Bertolaso S. Gloria 500 R/S handles 24 mm straight corks with gas injection and one capping head. Unlike the first unit, it does not use vacuum. Furthermore, it handles formats from 63 mm to 110.5 mm diameter, maintaining high sealing reliability. Altogether, these two capping stations allow the line to manage various closure types for still wine applications. Bottle washer and drying system in the Used Bottling Line for still wine

Condition: used, Year of construction: 2005, BMS filling and emptying machine, 2 heads for 0.5l NRW bottles 0.5l Euro bottles 0.7l Brunnen bottles 0.33l bottles Gbedpfe Adrctjx Aanjw

Condition: used, Year of construction: 2019, Overview Gbsdpfez E U Dijx Aansw Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: used, Year of construction: 2017, Overview  The Tecnoimpianti MINI STAB 300 SINGLE is a compact system for the acid stabilization of must and wine using the ion exchange process. It was built in 2017 by the Italian manufacturer Tecnoimpianti Water Treatment S.r.l. and was rarely used by the original owner and is now being sold due to a change of ownership. The machine is therefore in very good condition and available immediately. It is ideal for wineries, breweries or the production of carbonated beverages. Technical details - Capacity: approx. 300 l/h - Area of application: Acidification / stabilization of must and wine - Process: Ion exchange with strongly acidic cation exchange resin - Compressed air requirement: min. 6 bar - Power supply: 400 V / 3 Ph + N / 50-60 Hz - Installed power: 3.2 kW - Operation: Touchscreen HMI - Protection class: IP65 - Compressor tank: 400 L, 3 bar operating pressure - Certification: EU-compliant / CE - Special features Gsdpfxjwm Rfkj Aanjbw - Fully automated process control - Precise pressure and temperature control - Stainless steel construction (hygienic & durable) - Plug-and-play system with touchscreen - Built-in nitrogen feed - Effectively reduces potassium bitartrate formation

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: Gbsdpewiy Tvjfx Aanjw - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system

Condition: used, Year of construction: 2020, Overview  This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details - Output: approx. 350-400 cans per hour - Formats: 330 ml (Sleek); format parts for 440 ml included - Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing - Seaming: Integrated single-head can seamer Gbedpfowrixyjx Aanjw - Power supply: 0.8 kW, 220V, 50 Hz - Compressed air consumption: 180 L/min at 6 bar - Dimensions (L x W x H): 1100 x 1130 x 1160 mm - Weight: 280 kg

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, control voltage: 24 V, input current: 16 A, input frequency: 50 Hz, TROXLER TV 2000 SCREW CAPPING MACHINE We offer this TROXLER TV 2000 screw capping machine, equipped with a KTM capsule dispenser. This unit is designed for packaging professionals who require capping equipment with a capsule dispensing system. The unit has been fully refurbished and comes with a 6-month warranty. Specifications: • Brand: TROXLER • Model: TV 2000 Gbedpfoz Sn T Sjx Aansw • Type: Screw capping machine • Additional equipment: KTM capsule dispenser, for 28*18 capsules, output approximately 2000 bottles/hour • Condition: Fully refurbished For further information on compatible capsules, settings, technical specifications, or to arrange a visit, please contact us. A refurbished and guaranteed used capping unit, offered to packaging professionals.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 2,000 mm, total width: 1,000 mm, total length: 1,300 mm, type of input current: three-phase, overall weight: 600 kg, input voltage: 380 V, year of last overhaul: 2026, control voltage: 24 V, warranty duration: 6 months, input current: 16 A, input frequency: 50 Hz, POGGIO SE9 9-NOZZLE RINSING MACHINE Packaging equipment – Fully refurbished – 6-month warranty Gjdpfx Aez Spb Tjanobw We offer this POGGIO SE9 rinsing machine, equipped with 9 nozzles, designed for packaging professionals seeking rinsing equipment to integrate into their production line (conveyors provided without motorization). Fully refurbished, it comes with a 6-month warranty. Specifications: • Brand: POGGIO • Model: SE9 • Type: Rinsing machine • Equipment: 9 nozzles • Format: 25cl / 50cl / other formats available upon request • Condition: Fully refurbished • Warranty: 6 months For any technical inquiries, clarification on compatible formats, or to arrange a visit, please contact us. Refurbished and guaranteed used equipment for packaging professionals.

Condition: excellent (used), Year of construction: 1996, The machine was located at a school and was never put into production. It is also suitable for being disassembled for parts. Gbsds Afb D Aepfx Aanew

Condition: used, Year of construction: 2014, Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Technical data  Godpjyb Sm Djfx Aansbw - Total output: 60 cycles/min - one lane - length 3660 mm | width 1790 mm | height 2500 mm - recommend specifications: - Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% - Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm)

Condition: used, Year of construction: 1982, Overview  This bottle unpacker was manufactured in 1982 by German company Joha. The machine was part of a bottling line operating at 2,500 bph and is immediately available. Technical data - Capacity: - Part of a line running at 2,500 bph - Formats: - Prepared for 0.33 L Longneck - Unpacking head: Gbsdpfxjyb Snze Aanjw - Packing head for 24 bottles in a modular crate

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. Gjdjyb Sxajpfx Aanjbw The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats