Used Briquetting presses for sale (87)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine - Deb Esu R Sxxe Imiwscg

Condition: new, Selling a new, unused 80mm press bushing suitable for Weima and Gross briquette presses such as the GP 200. Dcjb E Iowg T Axomiwog Minimal wear in the press chamber thanks to the press chamber wear bushing. Press chamber wear bushings are case-hardened as standard. In both cases, increased wear in the press chamber is effectively prevented – especially with abrasive materials containing sand, soil, or metal shavings. Instead of replacing the entire press block when wear occurs, only the significantly cheaper press chamber needs to be replaced. This saves labor, time, and costs – significantly simplifying maintenance.

Condition: used, Two Valmac // Ascot briquetting presses with storage silo, cooling line, and crusher. Further information available upon request. Image similar. Briquette diameter: 70 mm engine: 37 kW each Dob E Ijwhu Huemiwecg

Condition: used, Year of construction: 2004, total width: 1,800 mm, total height: 2,400 mm, total length: 2,450 mm, briquette diameter: 70 mm, overall weight: 2,000 kg, power: 7.5 kW (10.20 HP), No. 04399 Briquetting press Reinbold RB 160 Used, year of construction 2004 Briquette diameter: 70 mm Capacity (depending on material): 100 - 150 kg/h Motor power: 7.5 kW Chrome-plated tongs Automatic operation with level switch or manual operation Briquette length control Including silo approx. 1400 x 1400 x 900 mm LWH, with agitator and discharge screw Siemens Simatic S7-200 control system Oil cooling for continuous operation and magnetic oil switch Technical documentation available Dcjb E Isrqhbuemiwjg Transport dimensions approx. 2450 x 1800 x 2400 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,416 h, Functionality: fully functional, machine/vehicle number: 1601, Equipment: safety light barrier, RUF 600 briquette press Dcob E Iewfnlxemiwsg used, ready for use Control: Siemens S7 Briquette format: standard Performance (hardwood chips): approx. 8 seconds per piece! The machine is in use and can be inspected under operating conditions.

Condition: excellent (used), Year of construction: 2014, overall weight: 500 kg, power: 3 kW (4.08 HP), Briquetting capacity 80-100 kg/h Conveyor screw diameter 130 mm Internal connection diameter 160 mm Chip briquette diameter 60 mm Dcjb E Imiewhv Imswsg

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen Dobot Hagnj E Imiwjcg

Condition: excellent (used), Year of construction: 2016, Bagging system for briquetting press/pellet press Dcebevuakgs E Imiwog 10 bags With control, programming of filling Manufacturer: Gross Apparatenbau

Condition: good (used), Code: 0031 Brand: COMAFER - ITALY Model: COMBI - CE Standard Combined briquetting and grinding machine in one machine to solve space problems in the factory, suitable for joinery, sawmills, carpentry, furniture factories and various - CE Standard Technical data: Hydraulic briquetting machine : Output / hour kg 60-70 Briquette dimensions diameter mm 60 Motor Hp 7,5 Chip container diameter mm 900 Level probe Hydraulic grinding machine Feeding opening mm 965 x 500 Shaft diameter mm 160 N° shaft turns 136 Motor power Hp 7,5 Screening hole mm 10 Output / hour kg 100-200 Suction inlet diameter mm 150 Dcsb E Ijvy D Tvsmiwsg Overall dimensions mm 2400 x 1000 x 1600 h Weight kg 1480

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, outer dimension length: 7,000 mm, outer dimension width: 2,500 mm, connection type: Hydraulisch, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, motor voltage: 380 V, noise level: 80 dB, Equipment: cooling unit, emergency stop, *For sale mobile wood briquetting plant. *Press Ruf RB440 > 2 hours/1 ton. *Press completely overhauled with all supporting documents. *Truck MOT > New, roadworthy, also suitable for use in environmental zones/Green registration number/Tax-free!!! Special vehicle work machine!! *PE packaging bags for approx. 90 tons included. *Linde hydraulic pump > New. *Gearbox discharge > New. *Intake fan motor > New. *Complete hydraulic oil change 200L > New. Dsbjwhw Syj E Imiwocg *Many spare parts available due to discontinued operation. *MAN truck 14.232/ 335,937 km, built in 1990. *Truck with new reinforced flatbed!! Suhr. *MOT > New. *All 6 tires are new. *Reconditioned front axle brakes. *All sold with instructions. *Please contact us via email if you are interested.

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers Dcjb E Isxfwdomiwjg + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2004, Large pressing zone and hydraulic unit for tinkerers or hobbyists Stuffing and filling cylinder Hydraulic unit with tank Control box Dcobovly Tij E Imiweg Location: from stock 54634 Bitburg - available immediately -

Condition: like new (used), operating hours: 2,100 h, Functionality: fully functional, Wood briquettes, rectangular, 27 x 10 x 10 cm Presses 900 kg/h Motor 90 kW Dceb E Imijwc D E Aswog Only 2100 hours With feed silo for smooth operation With mobile dust collector, Alko, including auger conveyor

Condition: excellent (used), Amis ZBP 30 Briquette diameter 2x30 Deb E Imevld Ideiwjcg Year of manufacture 2020, commissioned 2021 ?feature=shared Funnel 1m x 1m Length 2m, width 1.4m Throughput 50KG

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Dcobod Nm Sis E Imiweg Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Dsb E Imielht H Eswjcg Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,800 h, Briquetting machine model A6 Plus Motor: 7,5 kW Installed power: 7.5 kW Voltage 380 V Drum size Ø 1000 mm h 920 mm Maximum material volume in the drum 0.80 m³ Maximum material weight in the drum 300 kg Pump 26 cm³ 1000 g/min Unit 2 Tank capacity 110 l Maximum operating pressure 1.5 MPa (150 bar) Briquette diameter: 60 mm Maximum briquette length per single stroke: 50 mm Dsb E Imeumxkxsiwecg Production. 60/100 kg/h ("this value may vary depending on the characteristics of the material") General dimensions. Front, width, height 1650 mm 1110 mm 1410 mm (*moving side of the machine) Net weight. 750 kg New seal set in the hydraulic pump

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Dcob Eegl Nlme Imiweg Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2024, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Dcobjcnz U Ee E Imiwsg Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Press dimensions: approx. 2200x3000x1920 mm (LxWxH). Dcsb E Imewcc D Rjiwsg Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Dcjboil Hggs E Imiweg Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: good (used), Functionality: fully functional, Complete briquetting press including: -Hydraulics -80 mm press mechanism -Fully wired control cabinet -Oil cooler Djb E Imiou N D Nmowjcg -Silo Built in 2015; unused with 0 operating hours Currently under construction * Delivery time approx. 5 weeks Press available with 1 x 1 m container if less space is available Press optionally available with 2 x 2 m containers (see attached image) Additional charge: €4,970 net Two 80 mm press units can also be installed on this silo for an additional charge (for double the throughput) Technical specifications: Industrial briquetting press including oil cooler Throughput up to a maximum of 180 kg/h *depending on the raw material Briquette diameter: 80 mm Motor: 11 kW Weight: approx. 1500 kg Machine details: The TH 814 / 820 machines are designed for operations with required throughputs of up to 180 kg/h. The sturdy press housing enables the production of solid briquettes – from materials such as wood, Styrofoam, foam, light metals, paper, or biomass. Mounting on a stable base frame ensures quick installation and enables mobile use. Impurity-resistant screw conveyor thanks to cardanic suspension The screw conveyor, which transports the material into the pre-compactor of the briquetting press, is suspended from a cardan joint. This prevents impurities from causing damage to the screw conveyor. As is often the case, the suspension chosen always depends on the specific application. For metal applications, for example, we often recommend rigidly mounted screws. Ready for shift operation thanks to optional oil cooling: To compensate for temperature differences in the hydraulic oil, the briquetting presses are equipped with a special hydraulic oil cooling system (air or water cooling). This ensures that the maximum operating temperature of the oil of 75°C is not exceeded. A safety switch automatically shuts off the hydraulic systems in the event of overheating to prevent damage. Precise cylinder control thanks to non-contact proximity switches The cylinders are electrically controlled via a non-contact proximity switch. The limit switches are located at the front and rear positions, ensuring very precise movements and low maintenance costs due to low wear. Low-wear pressing thanks to wear bushings and plates To minimize the unavoidable wear during the briquetting process, WEIMA uses easy-to-replace PU plates bolted to the filling cylinder for pre-compaction in the filling tower. In addition, a specially hardened inlay, the so-called wear bushing, is used in the pressing chamber below. This can also be quickly replaced. Overall, maintenance costs are significantly reduced.

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, Weima briquetting press C 140 top condition Only 619 operating hours Year of manufacture 2018 Djb E Ievlv N Tjmiwocg Compact design, high reliability and an excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Total dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput (kg/h) 30-40 Hydraulic oil quantity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated pliers Pre-compressor with end-position dampened cylinder and screwed cover Switch box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials Dcobobtnf Ej E Imiweg such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2018, Used Weima Briquetting Press C 150 - 64 operating hours - As good as new Pictures of the press will follow in the next few days. Accessories: Automatic on/off Your Benefits Sturdy press mechanism with low-wear, chrome-plated clamps Press chamber wear bushing Pre-compressor with cushioned cylinder and screwed cover Control box with PLC control Screw channel with discharge screw Dob E Imswavgyjiwscg Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounted on a stable base frame with rubber feet Briquette length monitoring Robust construction, low-maintenance technology, and minimal space requirements: The C-Series machines are particularly suitable for small and medium-sized businesses whose required throughput does not exceed 50-80 kg/h or 200-400 kg/day. Virtually any suitable material can be briquetted, such as wood, Styrofoam, foam, paper, or biomass. All machines are available in left- or right-hand versions. Mounting on a sturdy base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5.50 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (approx. kg) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the briquette length to a consistent level Pressing chamber wear bushing: Prevents wear in the pressing area Location: From stock, 54634 Bitburg - available immediately -