Condition: ready for operation (used), Technical characteristics 5 axes Max workpiece length single 6000 mm, pendulum 2375 mm Max. workpiece width rear 1300 mm Max. workpiece thickness 300 mm, incl. clamping device Consoles with front stop 10 units 100 mm high suction cups for processing the underside of the workpiece Vacuum pump 2 x 100 m3/h Windows control system Windows XP operating system 17" TFT flat screen WOODWOP program Graphic representation of the clamping stations Modern 3D graphic interface software Remote diagnostics Cgslqxst Ttn Esx Nqjt Operating voltage 400 V, 50/60 Hz Control cabinet can be positioned on the right or left 5-axis main spindle 15 kW drive5+ HSK F63 Liquid cooling Electronically controlled from 1000 -24000 rpm Tool length 230 mm max Tool Ø: max 180 mm for milling tools 350 mm max for saw blade use Z-axis travel 750 mm Vibration sensor for monitoring the spindle during machining Tool changer by disc 18 stations D=130 milling tool HSK F63 Place pickup for saw blade 350 mm 25 spindles drilling unit (19 vertical, 2+4 horizontal, grooving saw) Laser projection for positioning of suction cup clamp to show the contour to be milled program in WOODWOP Chip transport belt Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 9500 mm Width: 5000 mm Height: 3450 mm

Condition: used, Year of construction: 2006, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: G06-107, tool weight: 1,000 g, input voltage: 220 V, Equipment: documentation/manual, • 4 horizontal milling heads to machine the hinges at the rear of the door • A vertical milling head and a horizontal milling head to machine the lock on the front of the door Technical attributes Cgsljv Hc H Ujqxx Nqet Approx. Onsite Dimension. (l x w x h) 2920x1550x1450 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 7,230 h, Functionality: fully functional, machine/vehicle number: 1000042701, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, feed length X-axis: 3,140 mm, feed length Y-axis: 1,570 mm, feed length Z-axis: 200 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Siemens, controller model: BH660, workpiece length (max.): 3,140 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 245 mm, total height: 2,600 mm, total length: 6,126 mm, total width: 3,935 mm, overall weight: 3,720 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 13, tool mount: 25 mm, tool length: 280 mm, tool diameter: 300 mm, tool weight: 7,500 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, ROVER A 1532 machining center, manufacturer: BIESSE year of production: 2020, serial number 1000042701, Number of hours worked 7230h. Working fields: X = 3,140 mm; Y = 1,560 mm for 4-axis, 1,570 for 5-axis Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm. Power supply: the machine can be powered by 380/400/415 V - 50/60 Hz. Machine description: - centralized lubrication system, - auxiliary vacuum system enabling blocking of elements using special templates, - system prepared for connection with two 90/100 m3/h pumps or two 250 m3/h pumps. The electric-pneumatic system is adapted to the number and type of selected pumps, - machine operation control system with numerical control; BH660 computer control system, - software with statistical report; Industry 4.0, - air conditioner in the electrical cabinet allowing for proper functioning of the electronic parts of the electrical cabinet and protection against dust, - system for returning to interrupted processing in the event of an emergency machine stop, - automatic belt lifting system, - 6 ATS beams - 24 pcs. trolleys, - 7 additional connections for connecting special devices to the auxiliary vacuum system of the machine, - Easy-Zone. Vacuum system with different levels for multiple loading and removal of processing residues, - division of the pneumatic system into 2 working areas in X, - bumper from the rear line, stroke 115 mm, extension 25 mm, - bumper from the middle line, mounted on 685 mm, stroke 140 mm, Cgslqxx Nev Dftleqjt - bumper from the front line, stroke 1348 mm, extension 140 mm, - 4 side bumpers with a stroke of 140 mm (2 left + 2 right) including the pneumatic system and 2 additional side bumpers, stroke 140 mm (1 right and 1 left), - sensor detecting bumper lowering, - 4 lifting beams to facilitate loading - modules H = 74 mm, - cam pump with a capacity of 250 m3/h, - suction nozzle with dimensions 132 x 146 x H74 mm, high-grip surface and integrated vacuum seal, - suction nozzle dimensions 132 x 54 x H74 mm, high-adhesive surface and integrated vacuum seal, with plate adaptation, - 13 kW (17.4 HP) working unit, with 5 interpolated axes, HSK F63 adapter, liquid-cooled; Technical characteristics: 11 kW (15 Hp) from 12,000 to 20,000 rpm in S1 cycle 13 kW (17.4 Hp) from 12,000 to 20,000 rpm in S6 cycle Max. rotation speed: 24,000 rpm C axis: continuous rotation in the range of 360º C axis, rotation speed: 16 rpm B axis: continuous rotation in the range of 360º B axis: rotation speed: 16 rpm Max. undercut angle: -10º, - 12-position suction nozzle controlled by NC, for 5-axis electrospindle, - heat exchanger for liquid-cooled installations, - BH 17 L drilling head, - tool holder with HSK F63 adapter, equipped with a collar for a circular saw used on 5-axis unit, - 300 mm saw for a collar holder. The machine has been serviced - service and vacuum pump oil replacement have been performed. The machine is in very good condition.

Condition: used, Year of construction: 2013, Numerical Control XP600 with BIESSE WORKS ADVANCED Software Working range in X axis mm 4300 Working range in Y axis mm 2200 Working stroke in Z axis mm 170 No. 2 working fields Full nesting work surface Blower for air curtain surface on machine No. 1 vertical electrospindle with C Vector axis, with automatic tool change, KW 11 motor, liquid cooling, Hsk type cones Automatic tool change system with no. 16 positions BH 17 L drilling head with no. 16 spindles arranged as follows: - No. 6 vertical in X axis - No. 4 vertical in Y axis - No. 4 horizontal in X axis - No. 2 horizontal in Y axis No. 1 integrated blade mm 120 in X axis for making grooves Protection system and front safety mats Automatic lubrication system Conditioning system for cooling and cleaning the machine control Vacuum pump mc/h 300 Sweeper cleaning system with setting for Rover A Cgslqjv Axlrsxx Nqst

Condition: excellent (used), Year of construction: 2012, operating hours: 12,247 h, Functionality: fully functional, HI! I'M SELLING THIS WEEKE VENTURE 108M / BMG111 MACHINE! Price: 31.999 EUR It was used generally on weekdays, about 4-6 hours/day since we bought it. The machine is absolutely working fine! PM if you are intrested. Cgjlqervhktjxx Nqjt Located near Budapest, Hungary

Condition: new, Year of construction: 2025, Functionality: fully functional, Fiber laser marking and engraving machine Galvo fiber laser marking and engraving machine for metals and plastics. Working area 150 x 150 mm Power 30 W Galvo head Electric Z axis 250 mm Max. speed 7000 mm/s Celqsuxc Nwoxx Nqsgt Minimum line thickness 0.02 mm Software included Supported formats BMP, JPG, JPEG, GIF, TGA, PNG, TIF, AI, DXF, DST, PLT Machine dimensions 800 x 800 Machine weight 150 kg Standard accessories included Software, Usb cable, European power cable, External laser start pedal, Installed optics, Red laser pointer for positioning, Anti-radiation and eye protection cover, Optional accessories focal lens 110x110mm CE Certifications. Workable materials: Metals (steel, iron, aluminum, brass, silver, gold, etc...+ anodized, paintedat, chrome plated) Plastics and polymers (ABS, PP, PE, PC, PET, PES, PEEK etc...+ painted)

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : Cgslqxx Neuaz H Isqet 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: excellent (used), Year of construction: 2006, Homag BOF 311/60/PM CNC machining center for solid wood and furniture parts, construction elements such as windows/doors and stairs Processing 6000 x 1730/1600 x 300 mm (80 mm with standard vacuum suction cups); processing depth in y 1450/1525 mm at the front stops Console table with 11 consoles, 3 lifting rails and vacuum suction cups Quick-Move system: automatic console positioning in x-direction 11 pneumatic clamping elements, 3-stage for scantlings, clamping range 15-120 mm 11 clamping aids for rungs and narrow parts, can be lowered pneumatically 2 pcs. Vacuum pumps 66/100m³/h Control: power control PC85 with WoodWop 6.0 incl. WoodWop window/front door software (industry program) 17 inch TFT screen, Windows XP for processing: Main spindle 15 kW 1500 - 24,000 1/min with C-axis and extension for Flex 5 unit HSK 63 tool holder Tool changer: 30-position disk changer on the x-support, Drilling head 12 spindles: V12/H4 ; of which 6 drilling spindles in X-direction and 7 drilling spindles in Y-direction Adapter units included in the scope of delivery: Sawing unit 200 mm drm 4-spindle cross head (drilling, milling) 2-spindle lock case unit Cgjloun Nwfsqxx Nqet Chip conveyor belt DOCUMENTATION AND CONTROL TEXTS: GERMAN

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Cgolev Aacfoqxx Nqot

Condition: ready for operation (used), Technical characteristics for uprights and sleepers in wood, aluminum and PVC, frames, doors and long and narrow parts Cjlstqkazoqxx Nqegt vertical and horizontal notching + 1 vertical drilling head HSK50 cone 2.2 kW spindle head displacement in X, Y and Z pneumatic workpiece clamping right and left reference Windows PC and network connection control cabinet Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Workpiece length max: 5200 mm - for tool Ø 25: 5375 mm Workpiece width max: 1400 mm - for tools Ø 25 mm: 1550 mm Workpiece thickness 300 mm max up to 60 mm with a standard clamping device Console table: consoles with front stop 8 units Rear stop (fixed) 4 units Lifting rails Console length 1340 mm Side stops left 2 units - right 2 units Suction cups 160 x 115 x 100 mm 16 units Suction cups 125 x 75 x 100 mm 8 units Vacuum pump 140 m3 / h Modern control system from a WINDOWS computer WINDOWS XP operating system Industrial pc 17 inch flat screen Cgolqxet Eyglex Nqot Ethernet network connection WOODWOP program Voltage 400 V 50/60 HZ Additional vacuum pump 100 m3 / h Chip conveyor belt 13-spindle drilling head 9 vertical 6 x drilling spindles 4 Y-drilling spindles 4 horizontal spindles 2 pins in X 2 Y-pins Main spindle 11kW HSK F63 Liquid cooling 1000/24000 rpm Ø of tools 180 mm max C axis including C axis tilt drive Unlimited swivel range 12-station tool changer Ø 135 mm CONSOLE LED positioning system Caractéristiques usinageWindows PCVacuum pump Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Power: 10 Kw Overall dimensions Lenght: 3800 mm Width: 1920 mm Colqxxjtqi Uvs Nqjgt Height: 2560 mm Weight: 1300 Kg

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times Cgelqxxetqi Uyo Nqot 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: ready for operation (used), Technical characteristics Colqxxotqkaas Nqjgt BOF 611 / 34 / 13 / 2R 4 machining axes + A axis 15kW HSK 63 electrospindle Useful dimension in X : 3740 mm Useful dimension in Y : 1550 mm Useful dimension in Z : 300 mm With gantry feeder HOMAG OPTIMAT Double work table Drilling unit Automatic feeder for bar feeder Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Machining X 3180, Y 1340 Drilling capacity X 3405, Y 1260 Pneumatic locking HSK63 12 KW 3-axis electro-chuck Displacement 0-100 m / min 0-90 ° blade grooving group 14-pin vertical drilling unit, 6-pin horizontal, 15-inch screen control cabinet included SOFT and control Machine to be restarted Nombre de ventouses12 Cjlqxxetqka Ts Nqjgt Nombre de poutres6 Caractéristiques usinageVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Capacity: 6200mm in x 1535mm in y 400mm in z 5 axis electric spindle 11kW HSK63F 10 ATS beam workbench with motorized movement (4 suction cups / beam) Cgjlqotqkadjxx Nqet 15° rotation on vacuum modules Positioning defined by the numerical control and recorded on each program 14 position chain tool magazine Independent tool changer on the front panel (large diameter / blade) Windows Computer BIESSE WORK staircase software Laser and vices not included Safety conveyor Vacuum pump 250m³/h Ideal for the production of stairs and joinery Power and Motors Pluging: Three-phased Power: 21 Kw Overall dimensions Lenght: 9000 mm Width: 3000 mm Weight: 7200 Kg

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Cgeletqi U Isqxx Nqst Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: ready for operation (used), Technical characteristics useful fields: 6000 x 1772.5 mm Cslqxxstqkbie Nqjgt 1 4-axis spindle with HSK 63 tool charger, 12 positions 28 drilling spindles including 8 horizontal 10 mobile beams with 3 suction cups + vices Machine to be restarted Course d'axe Y1850 mm Course d'axe X6860 mm Course d'axe Z275 mm Nombre de ventouses3 Nombre de poutres10 Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics 4 axis HSK 63 spindle + C axis Capacity 5200 x 1300 x 175 mm (thickness) Axis travel : 6000 x 1775 x 305 in Z 8 consoles with suction cups Clamping vices collets Vacuum pump 250 m3/h Waste evacuation belt Drilling unit 12 spindles, distance between centres 32 mm, grooving Ø 115 mm Spindle HSK 63 14 kW liquid cooled, horizontal milling unit 3 kW Suction 6500 m3/h Compressed air 8 bars Z LASER Projection of parts on work surface Ideal for stairs Power and Motors Power: 30 Kw Overall dimensions Lenght: 10000 mm Width: 2530 mm Cgelqxjtqkahsx Nqot Weight: 4800 Kg

Condition: ready for operation (used), Technical characteristics Unit drilling screwing hinge ANUBA Mounted on swivel support -10 to 90° CN Slide movement THK Drilling group 9HP 3000/24000 rpm On swivel support -10 to 90° CN Tool loader, 7 tool holders 6 workpiece supports with suction cup and vices locks - plugs - faceplate - strikers - hinges - barrels - set max wood thickness 120 mm stroke 1000 mm CN control cabinet Cgolqxetqkatjx Nqst Industrial PC MASTER SYSTEM CAD CAM Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Cgolqxjtqkawox Nqjt Forward spped 15m/min Digital control CN7000 ISO, IHM Mécanumeric on mobile panel with 15 inch touchscreen, data entry Ethernet link 500 W direct current servo motorization on the 3 axes Guides by rectified prismatic rails and ball bearing shoes Ball screw transmissions on X1, X2, Y and Z axes Protection of the kinematics of the axes by telescopic bellows on the X, Y, Z axes Aluminum bar support plate Digital Z axis 195 mm Cutting head with sealed CO2 ROFIN SINAR laser including laser, unit of control, cooling, mirrors - Maximum power 360 W Aiming laser Equipment compliant with CE directives following recommendations 2006/42 / CE + 2014/30 / UE + 2006/95 / CE and including : Double safety circuit with standardized relay + shock detector buffers on gantry Course d'axe Y1510 mm Course d'axe X3050 mm Course d'axe Z195 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 27 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Main components of the machine: - Longitudinal sliding frames of the 4 special carriages for blocking and moving the pieces. Working field 14 ml. (X axis) - The horizontal and vertical workpiece clamps can be automatically deactivated by CAD/CAM to allow the machining of larger than standard workpieces or to avoid collisions with the clamping devices. If the machining operations require it, the slides can be automatically replaced. The structure on which the part is clamped automatically tilts by 90° to allow the machining of the lower side of the beam. - Central frame where the beam is fixed (in transverse direction with respect to the rails) - 1 machining unit fixed to the beam - Perimeter cabin delimiting the machining area of the operating unit Machining unit consisting of : - Transverse slide (Y axis) - Vertical slide (Z axis) - Bi-rotary head (B and C axis) - 17 kW synchronous spindle with speed up to 18,000 rpm, coolant and HSK-63E cone tool holder - Workable sections: 1000mm (600mm in double vices) X ep.300mm 5-axis machine control (bi-rotary head) with Tool Center Point (TCP) CAD/CAM software Cooling unit of the electro-spindle with cooling liquid. Automatic lubrication system 1 horizontal tool magazine with 12 stations HSK63E Pre-loading and selection system Unloading system, made up of 6 supports with idle rollers for unloading the machined part Cgelqxxetqkalo Nqjt Waste removal conveyor belt Light curtains in front of the machine on the loading/unloading areas and perimeter barriers. Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 8 on-board tool carrier charger 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Cgolqxotqkbbjx Nqst Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics En cours de vérification Programmable positioning Head orientation : -70° +70 0-point laser High-frequency spindle motor : 4 Kw Cslqjtqi U Dsxx Nqjgt Motor speed up to 18,000 rpm Tilting motor : 0° to 90 Digital display on head Tool clamping diameter: 8-10-12-14-16 mm 4 Pneumatic clamps Table size : 650 х 6000 mm Longitudinal travel X : 4750 mm Head axial travel Y : 900 mm Height travel Z : 150 mm Horizontal carriage travel : 600 mm Suction connection diameter : 120 mm - 3,000 m3/h Power and Motors Overall dimensions Lenght: 6000 mm Width: 2500 mm Height: 1800 mm Weight: 2250 Kg

Condition: ready for operation (used), Technical characteristics X axis travel : 2850 mm Y axis travel : 1600 mm Z axis travel : 250 mm Cgslqxx Njtuh D Usqjt Part height : 250 mm Electrospindle 3 axis spindle, 7.5 kW HSK F63 spindle Revolver-type tool magazine, 12 tools Drilling unit : 9 spindles 5 vertical spindles 4 horizontal spindles Work surface : Profiled aluminum table Work table length : 2600 mm Work table width : 1080 mm Controls : Control panel On PC Windows XP Pro Software Xilog 3 and ROUTELINK Remote control type 0102 BECKER vacuum pump 90 m3/h Power and Motors Voltage: 380 V Pluging: Three-phased Power: 15 Kw Motor: 10 CV Overall dimensions Lenght: 6100 mm Width: 4500 mm Height: 2350 mm Weight: 3500 Kg