Condition: good (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 4,250 mm, travel distance Y-axis: 1,500 mm, number of spindles: 25, number of slots in tool magazine: 26, TECHNICAL DETAILS Type of machining: drilling, milling Working areas and axes Working area X-axis: 4,250 mm Working area Y-axis: 1,500 mm Stroke X-axis: 5,050 mm Stroke Y-axis: 2,150 mm Number of working areas: 2, vacuum console supports Working level with rods with suction elements: yes Number of rods with suction elements: 10 Movement speed Movement speed X-axis: 80 m/min Movement speed Y-axis: 60 m/min Movement speed Z-axis: 20 m/min Spindles and tool positions Main spindle power: 11 kW Number of controlled axes: 4 axes Number of drilling spindles: 25 Number of tool positions: 26 Vacuum system Vacuum pump: yes Number of pumps: 2 Individual capacity: 100 m³/h Drilling unit Unit: top Spindles for vertical drilling: 25 Milling unit Unit: top Number of controlled axes: 4 Motor power: 11 kW Speed: 24,000 rpm Blade unit Unit: top Blade unit: yes Unit: fixed for making channels in the X direction Max. tool diameter: 100 mm Speed: 7,500 rpm Tool magazines Tool magazine 1 Number of positions: 8 Tool: positioned on the operating head Tool magazine 2 Number of positions: 18 Tool: positioned at the rear of the machine Control Control system: WINDOWS XP Software for programming the machine: WOODWOP Safety systems Barcode label reader: yes Safety standard CE marking: yes Protection grilles attached to the machine: yes Safety system: front safety carpets Electrical Performance Total installed power: 25 kW Djb Hcsv Ea I Hsiadjcg EQUIPMENT WINDOWS XP control system WOODWOP software Barcode label reader CE marking Protective grille Note: Tools not included

Condition: repair required (used), - Power: 5,5/7,5kW - taken from IMA Quadroform Dcob Hcijia N Aneadog

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 11134, Used HUNDEGGER K2-625. CNC DESIGNED FOR MACHINING OF WOODEN BEAMS Loading area with 7 transversal motorized chains. Dcsb Hcev Invksiadog Maximum length of beams at infeed: 13.000 mm Maximum length of beams at exit: 12.000 mm 2 independent grippers for transport and positioning: "two-hand" system. Maximum working cross-section 625 mm x 300 mm Disk saw unit, diam. 800 mm. 4 axes. UNIVERSAL milling cutter unit with double exit. 4 axes. Upper vertical milling unit. Lower vertical milling unit. Lower vertical drilling unit with multipurpose support. Horizontal drilling unit with multipurpose support. Horizontal long chain sprat unit, 900 mm, with counter-support system. Hydraulic unit for automatic beam turning with maximum cross section 440 mm x 300 mm. Unloading area with 6 arms for the parking and storage of the pieces. Spare tools included Independent control panel. CE STANDARD Used machine, registration number 11134 and year of manufacture 2001, in perfect working condition.

Condition: ready for operation (used), Year of construction: 2006, 5 axis CNC machine SCM Record 132 Prisma dedicated for windows and doors production: working dimension: 4400 x 1300 mm Working dimension in Z: 180 mm 5 axis routing unit 15 HP (liquid cooling) automatic tool change 3 x 24 position = 72 position working table with traverse with vacuum cups help unit for heavy pieces Dcsb Hen D Hchjciadog pneumatic clamps for door and windows production vacuum pump 250 m3/h automatic lubrication conveyor for waste complet documentation

Condition: used, Year of construction: 2013, Numerical Control XP600 with BIESSE WORKS ADVANCED Software Working range in X axis mm 4300 Working range in Y axis mm 2200 Working stroke in Z axis mm 170 No. 2 working fields Full nesting work surface Blower for air curtain surface on machine No. 1 vertical electrospindle with C Vector axis, with automatic tool change, KW 11 motor, liquid cooling, Hsk type cones Automatic tool change system with no. 16 positions BH 17 L drilling head with no. 16 spindles arranged as follows: - No. 6 vertical in X axis - No. 4 vertical in Y axis - No. 4 horizontal in X axis - No. 2 horizontal in Y axis No. 1 integrated blade mm 120 in X axis for making grooves Protection system and front safety mats Automatic lubrication system Conditioning system for cooling and cleaning the machine control Vacuum pump mc/h 300 Sweeper cleaning system with setting for Rover A Dceb Hcsv Axlreiadsg

Condition: excellent (used), Year of construction: 2020, operating hours: 7,230 h, Functionality: fully functional, machine/vehicle number: 1000042701, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, feed length X-axis: 3,140 mm, feed length Y-axis: 1,570 mm, feed length Z-axis: 200 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Siemens, controller model: BH660, workpiece length (max.): 3,140 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 245 mm, total height: 2,600 mm, total length: 6,126 mm, total width: 3,935 mm, overall weight: 3,720 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 13, tool mount: 25 mm, tool length: 280 mm, tool diameter: 300 mm, tool weight: 7,500 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, ROVER A 1532 machining center, manufacturer: BIESSE year of production: 2020, serial number 1000042701, Number of hours worked 7230h. Working fields: X = 3,140 mm; Y = 1,560 mm for 4-axis, 1,570 for 5-axis Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm. Power supply: the machine can be powered by 380/400/415 V - 50/60 Hz. Machine description: - centralized lubrication system, - auxiliary vacuum system enabling blocking of elements using special templates, Djb Hcsv Dftleiadecg - system prepared for connection with two 90/100 m3/h pumps or two 250 m3/h pumps. The electric-pneumatic system is adapted to the number and type of selected pumps, - machine operation control system with numerical control; BH660 computer control system, - software with statistical report; Industry 4.0, - air conditioner in the electrical cabinet allowing for proper functioning of the electronic parts of the electrical cabinet and protection against dust, - system for returning to interrupted processing in the event of an emergency machine stop, - automatic belt lifting system, - 6 ATS beams - 24 pcs. trolleys, - 7 additional connections for connecting special devices to the auxiliary vacuum system of the machine, - Easy-Zone. Vacuum system with different levels for multiple loading and removal of processing residues, - division of the pneumatic system into 2 working areas in X, - bumper from the rear line, stroke 115 mm, extension 25 mm, - bumper from the middle line, mounted on 685 mm, stroke 140 mm, - bumper from the front line, stroke 1348 mm, extension 140 mm, - 4 side bumpers with a stroke of 140 mm (2 left + 2 right) including the pneumatic system and 2 additional side bumpers, stroke 140 mm (1 right and 1 left), - sensor detecting bumper lowering, - 4 lifting beams to facilitate loading - modules H = 74 mm, - cam pump with a capacity of 250 m3/h, - suction nozzle with dimensions 132 x 146 x H74 mm, high-grip surface and integrated vacuum seal, - suction nozzle dimensions 132 x 54 x H74 mm, high-adhesive surface and integrated vacuum seal, with plate adaptation, - 13 kW (17.4 HP) working unit, with 5 interpolated axes, HSK F63 adapter, liquid-cooled; Technical characteristics: 11 kW (15 Hp) from 12,000 to 20,000 rpm in S1 cycle 13 kW (17.4 Hp) from 12,000 to 20,000 rpm in S6 cycle Max. rotation speed: 24,000 rpm C axis: continuous rotation in the range of 360º C axis, rotation speed: 16 rpm B axis: continuous rotation in the range of 360º B axis: rotation speed: 16 rpm Max. undercut angle: -10º, - 12-position suction nozzle controlled by NC, for 5-axis electrospindle, - heat exchanger for liquid-cooled installations, - BH 17 L drilling head, - tool holder with HSK F63 adapter, equipped with a collar for a circular saw used on 5-axis unit, - 300 mm saw for a collar holder. The machine has been serviced - service and vacuum pump oil replacement have been performed. The machine is in very good condition.

Condition: excellent (used), Year of construction: 2006, Homag BOF 311/60/PM CNC machining center for solid wood and furniture parts, construction elements such as windows/doors and stairs Processing 6000 x 1730/1600 x 300 mm (80 mm with standard vacuum suction cups); processing depth in y 1450/1525 mm at the front stops Console table with 11 consoles, 3 lifting rails and vacuum suction cups Quick-Move system: automatic console positioning in x-direction 11 pneumatic clamping elements, 3-stage for scantlings, clamping range 15-120 mm 11 clamping aids for rungs and narrow parts, can be lowered pneumatically 2 pcs. Vacuum pumps 66/100m³/h Control: power control PC85 with WoodWop 6.0 incl. WoodWop window/front door software (industry program) 17 inch TFT screen, Windows XP for processing: Dceb Hciaeun Nwfjdog Main spindle 15 kW 1500 - 24,000 1/min with C-axis and extension for Flex 5 unit HSK 63 tool holder Tool changer: 30-position disk changer on the x-support, Drilling head 12 spindles: V12/H4 ; of which 6 drilling spindles in X-direction and 7 drilling spindles in Y-direction Adapter units included in the scope of delivery: Sawing unit 200 mm drm 4-spindle cross head (drilling, milling) 2-spindle lock case unit Chip conveyor belt DOCUMENTATION AND CONTROL TEXTS: GERMAN

Condition: new, Year of construction: 2025, Functionality: fully functional, Fiber laser marking and engraving machine Galvo fiber laser marking and engraving machine for metals and plastics. Working area 150 x 150 mm Power 30 W Galvo head Electric Z axis 250 mm Max. speed 7000 mm/s Minimum line thickness 0.02 mm Software included Supported formats BMP, JPG, JPEG, GIF, TGA, PNG, TIF, AI, DXF, DST, PLT Machine dimensions 800 x 800 Machine weight 150 kg Standard accessories included Software, Usb cable, European power cable, External laser start pedal, Installed optics, Red laser pointer for positioning, Anti-radiation and eye protection cover, Optional accessories focal lens 110x110mm CE Certifications. Dcjb Hciajuxc Nwjdjg Workable materials: Metals (steel, iron, aluminum, brass, silver, gold, etc...+ anodized, paintedat, chrome plated) Plastics and polymers (ABS, PP, PE, PC, PET, PES, PEEK etc...+ painted)

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, BIESSE ROVER B7.65 R FT MACHINING CENTER Fully PC-based XP6OO control system. Dsb Hcistt Smdjadecg Division into 2 shaping areas and 8 X-shaped clamping areas 2 x 300m3/h vacuum pumps Configuration 1 X=6450mm Y=1592mm Z=180mm Composition B1-P1 12kw electrospindle, HSK F63 air-cooled prisms -360° swivelling operator device - C axis 12-position revolver tool magazine on Z carriage Predisposition for mechanical copier 5 HSK F63 ERC 40 Leitz tool holders with spring clamps Automatic lubrication system - Diagnostic video Oil-bath sawing aggregate for 215mm blade Menzel air-oil sprayer

Condition: used, Year of construction: 2006, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: G06-107, tool weight: 1,000 g, input voltage: 220 V, Equipment: documentation/manual, • 4 horizontal milling heads to machine the hinges at the rear of the door Dcsb Hciaev Hc H Uedsg • A vertical milling head and a horizontal milling head to machine the lock on the front of the door Technical attributes Approx. Onsite Dimension. (l x w x h) 2920x1550x1450 mm

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Dcjb Hcisv Aacfeadsg

Condition: excellent (used), Year of construction: 2012, operating hours: 12,247 h, Functionality: fully functional, HI! I'M SELLING THIS WEEKE VENTURE 108M / BMG111 MACHINE! Price: 31.999 EUR Dcob Hciervhktoadsg It was used generally on weekdays, about 4-6 hours/day since we bought it. The machine is absolutely working fine! PM if you are intrested. Located near Budapest, Hungary

Year of construction: 1999, Condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Dceb Hciaeiiy E Tsdog Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, feed length X-axis: 13,300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 455 mm, cutting height (max.): 200 mm, total length: 32,000 mm, power of the milling unit: 18,500 W, total height: 3,000 mm, cutting width (max.): 455 mm, total width: 5,000 mm, air demand: 1,000 m³/h, saw blade diameter: 555 mm, rotational speed (max.): 24,000 rpm, machining length: 1,330 mm, Equipment: rotational speed infinitely variable, safety light barrier, type plate available, WEINMANN BEAMTEQ B-660 PS Dcob Hcisvvidxjadeg Year of production 2022 Start of production Q1 2024 The machine has several dozen hours of work Condition as new It has 3 spindles - 5 axes - 4 axes with flex 25 - 3 axes Integrated tool magazine 12 pcs. Manual feed and unload table

Condition: good (used), HOMAG VENTURE 10 XL MACHINING CENTER MAX. PART LENGTH 6000MM MAX. WIDTH 1525MM MAX. THICKNESS 300MM 15KW MAIN SPINDLE WITH C-AXIS 18-POSITION TOOL CHANGER Djb Hciajuk Dp Isdscg 4KW VERTICAL DRILLING MOTOR HEAD 17 SPINDLES, 4 HORIZONTAL + 0/90° SAW WOODWOP PACK FOR DESKTOP PC

Condition: new, Year of construction: 2024, Spindle speed: 4460min-¹ Min. workpiece dimension X: 300mm Min. workpiece dimension Y: 90mm Min. workpiece dimension Z: 10mm Max. Travel speed X axis: 20m/min Max. tool diameter: 35mm Max. Workpiece dimension X: 3000mm Max. Workpiece dimension Y: 900mm Max. Workpiece dimension Z: 50mm Grooving saw speed: 5700min-¹ Dcjb Hjl D Rw Nsciadog Dimensions: 3704mm x 1455mm x 2209mm (L x W x H) Nominal width of external suction nozzle: 120mm Power drive motor: 2,2kW Weight: 1200kg

Condition: excellent (used), Year of construction: 2004, 4-axis machine with console table, 6 supports manually movable in X, 3 vacuum cups per console, Dcjb Hcetv D Eljiadjg vacuum pump 100m³/h Vacuum connection for templates LED display for suction cup position display Working range X: 200 - 3250 mm Working range Y: 70 - 1220 mm Working range Z: 12 - 100 mm (passage 150 mm) 12 vertical drilling spindles 6 horizontal drilling spindles, 4 of which in X direction and 2 in Y direction. Grooving saw in X-direction Milling spindle 12 kW up to 24000 rpm with C-axis 360° interpolation, liquid circulation cooling - WZW 8-fold front and 8-fold rear Tool changing aid at the front right POWERCONTROL PC 85T control unit with TFT 17″ WoodWop 5.0 incl. MDE and production list software Operating terminal Adapter units (included in the scope of delivery): -Lock box 2 spindles with blow-off nozzle Barcode scanner

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece height (max.): 40 mm, working width: 200 mm, working length: 3,200 mm, TECHNICAL DETAILS Machinable length: 200 - 3,200 mm Machinable width: 40 - 200 mm Workpiece height: max. 130 mm Dcsb Hcijvit E Hsadog Depth with maximum mortise Ø 320 mm: 105 mm Tenoning carriage speed: 0 - 100 m/min Profiling speed: 3 - 15 m/min Tenoning 1st cross-cut saw: Power: 5.5 HP (4 kW) Saw Ø: 400 mm 2nd tenon cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available 3rd tenoning cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available Vertical positioning: With continuous axis 4th digital angle adjustment bracket: Available 5. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Double direction of rotation: Available Positioning: Vertical and horizontal with continuous axis Intervention (calibration): Time-delayed against vibrations 6. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Positioning: Vertical and horizontal with continuous axis 7. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Positioning: Vertical and horizontal with continuous axis 8th restoration group Positioning: Vertical and horizontal with continuous axis Device: For pulling out the lock 9. lower horizontal shaft (groove) Positioning: Vertical and horizontal with continuous axis Power: 88.5 HP (66.4 kW) 10. digital guidance: available 11. return of the parts: To the operator

Condition: used, max. workpiece length 4400 mm profile spindle 1 Stück main drive 19,2 kW Dsb Hed Nv Dcociadocg CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Various tool magazines for optimal tooling - Simultaneous feeding with up to 6 workpieces - patented clamping system for optimum machining of workpieces - CNC controlled work table with automatic positioning of the beams and Stretcher - Automatic reclamping for changing between external and internal profiling - INTEGRATED windowing software, i. Machine does not have to (but can Of course) be controlled from the office with external industry software. - powerful engine with 19.2 kW HSK-63 E - Loading and unloading conveyor Ask for a quote and see for yourself unbeatable value for money! VIDEO from the machine attached! At the side you will find the techn. Description of the machine as a PDF document. We would be happy to make your used machine one take reasonable price in payment! (technical information according to the manufacturer - without guarantee!)

Condition: like new (used), Year of construction: 2009, CNC Saom MODEL ML 250 Dcebot I U T Se Hciadsg

Condition: good (used), BIESSE SKIPPER 100 MACHINING CENTER DRILLING UNIT Number of vertical spindles 29+29 Number of horizontal spindles in X 8+8 Number of horizontal spindles in Y 2+2 Motor power for each head 2x1.7kw Rotation speed 4000T/min WORKING RANGE X,Y,Z In length Vertical holes 0/3000 Horizontal holes X 0/3000 Horizontal holes in Y 0/3000 Parallel splines in X with blade 0/2250 Dob Hcjumi Injiadecg Width Vertical holes in Y 0/1160 Vertical holes with system 32 32/1032 Horizontal holes X 0/1064 Horizontal holes Y 90/1076 Parallel X-splines with blade 112/1112 In thickness 8/60

Condition: new, Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Djb Hcijrxtvkoadecg Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Dcjb Hciaeukcy Ejdog Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Condition: new, Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg Dsbjrxtwdo Hciadjcg The price is 23100 Eur

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, BIESSE ROVER B7.65 R FT MACHINING CENTER Fully PC-based XP6OO control system. Division into 2 shaping areas and 8 X-shaped clamping areas 2 x 300m3/h vacuum pumps Configuration 1 X=6450mm Y=1592mm Z=180mm Composition B1-P1 12kw electrospindle, HSK F63 air-cooled prisms -360° swivelling operator device - C axis 12-position revolver tool magazine on Z carriage Predisposition for mechanical copier Dceb Hciett Sq Noadog 5 HSK F63 ERC 40 Leitz tool holders with spring clamps Automatic lubrication system - Diagnostic video Oil-bath sawing aggregate for 215mm blade Menzel air-oil sprayer