Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software Cebeufggwevdkuterb B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Working area: X-axis 3,765 mm Y-axis 1,585 mm Table in grid plate design 4 workpiece stops in the X direction at the back 6 workpiece stops in the X direction at the front 2 workpiece stops in the Y direction, each left and right 2 work fields (alternating field assignment) Milling spindle 12 kW HSK F63 with torque support for locking adapter units Tool magazine for 12 tools 2 vacuum pumps each 250 cbm/h PC control with BIESSE Works and BIESSE Nest Crjbevrw S Nsvdkutsb Protective grille with access door on the left side Safety mats in front of the machine

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total number of vacuum pump pins: 72, vacuum pump pin stroke: 100mm, vacuum pump pin useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 14500mm/7800mm, control: Siemens Sinumerik 840D sl, NCU 720.3b, spindle hours: approx. 23899h. Documentation available. On-site inspection is possible. Csbvowgngxjdkutjrb

Condition: new, Year of construction: 2025, General specification FANTOM 2136, is associated with milling, optimizing, drilling in 2D and 3D processes of panels such as wood, fiberboard, chipboard, doors, furniture parts, plastic, alucobond (type of composite), aluminum and acrylic materials. Cobvdswc N Sbekuterb The machine can be converted into a fully automatic production line. Technical specification FANTOM 2136 Working range 2100 mm x 3660 mm Z-axis 250 mm X-axis speed 90 m/min Y-axis speed 90m/min E0dkmojey Hnocm E T Ssld Uw Roi Rok Z-axis speed 30 m/min Motor power 11 kW / 15 hp HSK F63 Hiteco Spindle speed 24000 rpm Multi-drilling unit Control system Beckhoff PC based Cad Cam Software AlphaCam Lubrication system Automatic Tool cooling air cooling Tool change 16 pieces fixed magazine Standard Tool change Carousel: option Vacuum pump 250m3 Becker Vacuum area 9 automatic areas Power 25 kW Electricity 380V - 50Hz Weight 4040 kg Dimensions 3800mm X 5400mm.

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Cebvdkewhrvtjutjrb Storage Location: Supplier

Year of construction: 2017, Condition: ready for operation (used), Main Drive Number of axis 5 Table Outer length 8500 mm Outer width 2600 mm Additional Equipment Automatically adjustable support table with vacuum pins Vacuum suction plates built into the fixed machine bed Allows flexible and secure part positioning Crebvdkuewctyistob This 5-axis Hamuel Reichenbacher VISION III-TT-L was manufactured in 2017, designed as a CNC Wood Machining Centre. It offers advanced capabilities for complex woodworking tasks. Consider the opportunity to buy this Hamuel Reichenbacher VISION III-TT-L CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2017, Working dimension X: 5.400 mm Working dimension Y: 1.900 mm Working dimension Z: 350 mm Independent Z-axes: 2 Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 24 Disc tool changer: Yes Pickup change place: Yes Vertical drilling spindles: 22 Cebvdowfrbdekutorb Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Stop for top layer protrusion: Yes Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 200 m³/h Special workpiece clamping system: Clamps for beams Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: MASTERWOOD MASTER 3D, MASTERWOOD MASTERWORK, MASTERWOOD MASTER AT Conformity marking: CE mark Total connection: 54 kW Weight: 6.500 kg Space requirement Length: 9,03 m Space requirement Width: 5,55 m Space requirement Height: 3,16 m

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: X-axis approx. 3,050 mm Y-axis approx. 1,200 mm Workpiece thickness max. 60 mm when using the gluing unit Console clamping table with: 6 workpiece support supports with hoseless 2-circuit. Clamping system 1 workpiece stop per support in the X direction 1 workpiece stop each on the left and right, movable 2 workpiece stops on the back of the table for large workpieces Table designed for 2-compartment occupancy when using the gluing unit, for pendulum machining when drilling and milling 4 plug connections for connecting pneumatic clamping elements Machine zero point front left 4 pcs. Lifting rails, facilitate the positioning of heavy workpieces LED setup aid for clamping table, facilitates the positioning of the consoles and the vacuum suction device Main spindle 11 KW, vector-controlled HSK F63 mount Speed max. 18,000 rpm Spindle retraction stroke, enables the use of the drilling head with exchanged profile milling unit Tool length including tool holder up to max. 150 mm C-axis with unit interface with pneumatic interface Unlimited swivel range 12-way disc changer Drilling unit with: 11 vertical spindles in X direction 7 vertical spindles in Y direction Horizontal drilling / grooving saws in crosshead design, swiveling Crobvdkjvpubpsutsb 0/90 degrees Replaceable gluing part, housed on the right side of the machine stand POWERCONTROL PC85 control system with the following HOMAG software: + WOODWOP with technology database + WOODSCOUT Adapter units: + Saw-drill unit, manually pivotable + Lock case milling unit, 2 outputs + Drilling/milling unit, 4 spindles + Combination unit, radius milling/scraping blade

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Price: On request - Main motor power [kW]: 9.5 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Working range Z [mm]: 1810 - Number of milling spindles [pcs]: 1 - Year: 2013 - Documentation available: Yes - CE mark available: Yes - Serial number: AA1/017355 - Voltage [V]: 400 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information Crobvdswcbr Hokutjb VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, BIESSE SKILL 1536 G FT Numerically controlled machining centre Description; Working fields: X = 3765 mm; Y = 1585 mm; Manual lubrication system 2 back stops equipped with pneumatic system + 1 left side stop3 front stops + 1 left side stop Vacuum system Electrospindle 13,2 kW (17,7 HP) ISO 30 Flange for the assembly of aggregates on an electrospindle Prearrangement for the assembly of a 360° operating unit (C Axis) 4 outlets air blowing unit Revolving tool changer with 12 places NON EC safety devices including 1 safety mat and low fence 1 7000201 Automatic lubrication system 1 7550008 Presetter for the measurement of the tool length with diameter up to 130mm 1 7022181 CE Safety devices according to Directive 2006/42/CE for base machine 1 7300969 250 m3/h rotary vanes vacuum pump 1 AC150307 Cable tray at rearside 1 7250165 ISO 30 Aggregate for sawblade with maximum diameter: 215 mm 1 7530075 Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine 1 7530333 Biesse FoldingEntry-level software module for folding (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Crebvdsv Tb Scskuteb Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Cobvdewhrvmjkutsrb

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Cjbvdkusvitzzstsrb Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this.

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Crebvdkujv A Ainetob Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Cebvewhypnsdkutorb Y-axis: 60 m/min Z-axis: 20 m/min Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Drilling head: HSD  20 vertical spindles 4 horizontal grooving saw in X-axis grooving saw in Y-axis Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Tool magazines: 16-position turret magazine Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Crsbsu Druysvdkutob Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindle guides

Condition: used, Year of construction: 2017, Working dimension X: 8.500 mm Working dimension Y: 2.600 mm Working dimension Z: 150 mm Number of milling spindles: 2 Main motor power: 15 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Disc tool changer 24-fold: Yes Pickup change place: Yes Vertical drilling spindles: 8 Crjbowfgzfsvdkuteb Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pin system Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Outfeed: belt conveyor Safety device: Bumper Chip conveyor: Yes Control: SIEMENS SIMATIC HMI TOUCH, SIEMENS SINUMERIK PCU 50 Conformity marking: CE mark Space requirement Length: 14,5 m Space requirement Width: 9,4 m

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Condition: well maintained Crjbvdkuoulp Edotob Technical data: Processing length in X = 200 - 3200 mm Max. travel without re-clamping 1300 mm in Y = 70 - 920 mm Material thickness Z = 8 - 70 mm Equipment: Milling unit: 6.5 kW (S6-40), air-cooled with HSK-F 63 tool holder Drilling unit: 1.7 kW, 15 spindles Tool changer: 6-way magazine pick-up system, pneumatic 19" flat screen Campus software 1 machine license inc. Cabinet Control light ECO vacuum system, 1-circuit vacuum system 8m³/h Automatic central lubrication combined lubrication points for all linear guides in X, Y and Z directions Milling tools are not included Scope of delivery! Availability: short term Location: Röllbach

Condition: new, Year of construction: 2021, CNC machining unit for milling Tool spindle position: 90° Machine connection: Holz Her with HSK 63 F Cebvdkjwb Ehisutsrb Drilling: 3000 - 9000 rpm Spindle speed: max. 15,000 rpm Gear ratio i = 1:1.5 Rotation direction: left/right Torque: max. 20 Nm Tool holder: ER32/ER16 Spindle for omega cutters: ER16 Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Travel path 5000 x 2100 x 180 mm In 19 mm Forescolor finish, consisting of a milling table (X-axis), a gantry (Y-axis), a Z-axis unit made of compact board and a base frame, with adjustable machine feet, and a milling bed made of 19 mm MDF as a sacrificial board. Table openings pre-installed longitudinally and transversely. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for use. Adjustable machine feet. High-performance grease for lubricating the guide carriages. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control box, as well as sensors for each axis. Switching relay for automatic control of the existing extraction system. Crsbvdkswb Eh Ajutsb Brush seals for dust protection. CE-compliant safety equipment with a mobile extraction system and a single-sided laser scanner for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). Handheld control unit with all the necessary functions for operating the machine, including an emergency stop button and deadman's switch. Tool length sensor for determining the tool length and changing the active zero offset. High-frequency spindle with 2.2 kW, including union nut, frequency converter, line filter, braking resistor, and collet set. 21.5-inch monitor as a built-in monitor, including a mini PC with Windows 10, Rhino 7.0 CAD software, Estlcam V 11 G-code generator, Beaicon2 control software, and a mouse and keyboard, pre-installed in an ergonomic console. (RECOMMENDATION: Data transfer should be done via USB stick, as otherwise automatic updates could disrupt operations.) Includes a milling bed designed as a vacuum table, consisting of twelve adjustable sub-elements. A cross table made of PE with an MDF cover plate. A vacuum pump from Becker with a capacity of 160 m³/h, designed as an oil-operated impeller. (Recommended use: machining coated chipboard.) Two 16 A, 400 V AC plugs are required for the vacuum pump's power connection. The customer must provide 3 mm HDF, raw on both sides, as a sacrificial plate for the entire vacuum table (5000 x 2100 mm). Includes a 10-piece cutting tool set: 2 x 5 mm TAC double-flute cutters. 8 x 4 mm solid carbide single-flute cutters. (Tool selection can be adjusted as needed.)

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: Function tested Equipment and technical data: Milling aggregate 4.4 kW Cobvdkskwg R Ijutsrb HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Condition: used, Year of construction: 2018, Wing unit Cobvdkujv E S Avjtjrb for wood Her CNC machining centers used Year of manufacture 2018 HSK 63 F mount with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed 8000 rpm max. output speed 12,000 rpm Permissible operating temperature 85° Unit can be swiveled 360° around the drive axis Noise level 80 db(A) Weight 3.257 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Crjbswb Ehcjvdkuteb Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, both for solid wood, panel materials or other materials. Advantages: - Very small space requirement - Maximum time savings thanks to extremely fast production times - Fast amortization thanks to low purchase price - Quick learning of the technology thanks to extremely simple operation - Cleanliness of the workpieces with low suction power thanks to machining from below - Extremely fast, simple and variable programming with the MASTERWORK software (standard) - Extremely fast and simple programming of complete cabinets through the use of Palette CAD (option) Technical data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000mm for all units Min. workpiece width: 85mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60mm Min. workpiece thickness: 10mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and also on the ratio of length to width! Units: 16mm drilling head: Vertical spindles in X direction: 5 pieces Vertical spindles in Y direction: 5 pieces Horizontal double drilling spindle in X direction: 2+2 pieces Horizontal double drilling spindle in Y direction: 1+1 pieces Distance between drilling spindles: 32mm Speed of drilling spindles: 4,000 rpm. Motor: 1.7 kW Groove saw: in X direction Speed: 4,000 rpm Max. saw blade diameter: 125mm Motor: 1.7 kW (The groove saw is integrated in the drill head) Control: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB storage space Color screen Integrated video card 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150mm Other features: - Air tables in the work area - Roller table in the inlet and outlet - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (Operating instructions, circuit and pneumatic diagram are included in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm. Motor: 4.5 kW with ISO 30 mount Cobvov E Szxedkutorb Incl. integrated suction control (when drilling only the drill head is suctioned, when milling only the milling unit is suctioned) 6-way tool changer Tool equipment, consisting of: 3 pieces 5mm – GL 70mm - blind hole drill (right) 2 pieces 5mm – GL 70mm - blind hole drill (left) 1 piece 5mm – GL 70mm - through drill (left) 2 pieces 8mm – GL 57.5mm - blind hole drill (right) 2 pieces 8mm – GL 57.5mm - blind hole drill (left 1 piece 10mm – GL 57.5mm – blind hole drill (right 1 piece 10mm – GL 57.5mm – blind hole drill (left 1 piece 10mm – GL 70mm – blind hole drill (left) 1 piece 8mm – GL 70mm - blind hole drill (right) 1 piece

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Csbvdovymfujkutorb Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindles

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface Csbvdkuewb Eg Soterb -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis