Used injection molding machines with a clamping force of 250 - 999 kN for sale (260)

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening: 750 mm Nwodpfx Asxw Upfjh Ujr Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Nodpfx Ajw Ebpwjh Ujwr Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Nwodpoxl Tz Aefx Ah Uor

Condition: used, Year of construction: 1992, Arburg 370C-800-225 Clamping force: 80 tons Nedpfx Ajxyh Eleh Uswr Year of manufacture: 1992 Screw diameter: 35 mm Tie bar spacing: 37x37

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Nwodpfoxcw T Rjx Ah Usr Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: used, Year of construction: 2005, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, load hours: 81,700 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Nsdpfx Ajrbqtneh Uewr Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Nwodpfjxwviaex Ah Uer Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Machine weight: 5,300 kg

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Pump motor 18.50 KW Nwsdpsvu Dncefx Ah Usr Weight 7,400 KG

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Nsdpfx Asxl Tzcjh Uowr Immediately available!

Condition: like new (used), Year of construction: 2008, operating hours: 41,000 h, functionality: fully functional, clamping force: 550 kN, Horizontal injection moulding machine from Boy, model 55 A. Year of manufacture: 2008. Operating hours: 41,000. The machine is delivered fully reconditioned by our expert technical team and in optimal working condition. Technical Details OPERATING HOURS: 41,000 YEAR OF MANUFACTURE: 2008 CLAMPING FORCE: 550 kN MAX. DISTANCE BETWEEN PLATENS: 650 mm DISTANCE BETWEEN TIE BARS: 360x335 mm PLATEN DIMENSIONS: 565x540 mm SCREW DIAMETER: 38 mm Nodpfx Ahew Hqkgs Uswr INJECTION PRESSURE: 1,508 BAR INJECTION WEIGHT: 129.8 g INJECTION VOLUME: 136.1 cm³ MINIMUM/MAXIMUM MOULD HEIGHT: 250/650 mm

Condition: good (used), Plastic injection molding machine : Brand: BMB Type: KW650/3500 650 tons Year: 1999 Weight: 32500kg Power : 128 kW Distance between H-V columns: 860x760mm Min-max mold thickness: 250-900mm Movable platen stroke: 1000mm Recent parts installed on the press: Nedpfx Ajik H Ensh Uswr 04/2020: hydraulic safety valve on mold-holding platen: €1414 07/2021 : Hydraulic pump + coupling : 4666.74€ HT 07/2022 : More than 5000€ spent on electronic cards Optional robot: €7,000 Brand : Sepro Type : SR 4030 S3 Year : 01-08-2006

Condition: used, Year of construction: 2020, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, load hours: 4,200 h, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Nedov S H N Ropfx Ah Ujwr

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Nwodpfx Ahjxwu R Ne Usr Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Nodpfx Asxqfi Ash Uowr Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h

Condition: excellent (used), Year of construction: 2010, Vertical injection moulding machine. 3-station rotary table Screw diameter 22 mm Year of manufacture 2010 Nwodexvmnkepfx Ah Uor

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Nwsdpfxswm Izie Ah Ujr Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, screw conveyor diameter: 30 mm, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar Nwsdpfx Aeh Nvnwjh Uer CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Nwodpfx Ahjxqdxio Uor Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine

Condition: excellent (used), Year of construction: 2008, Model: Boy 55 A Clamping force: 55 tonnes Nwodpfxjxvihtj Ah Uor Year of manufacture: 2008 Screw diameter: 32 mm Shot weight: 92 g Operating hours: 48,000 h

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Nedpfxowm Iyfs Ah Ujwr Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 Nedpfx Ahsh Tk Rvo Uswr CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Nodpfjxqdtaox Ah Uowr Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 490 cm³, injection pressure: 2,000 bar, overall weight: 2,300 kg, load hours: 60,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Nwodoxa Htzepfx Ah Uor terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2023, Fanuc ROBOSHOT α-S30iB (2023) Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Nwodpfx Ajxqaidsh Ujr Screw Diameter: 22 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, load hours: 45,000 h, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Nedpjwi Uzhofx Ah Uswr terms of payment: 100% prior to delivery