Used Jointer planer & thickness planer combinations for sale (153)

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller Dcslriou R Sz Ts Hh Ijg ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: used, Year of construction: 1987, Used machine Built-in mechanism for simultaneously folding up both planing tables, in seconds and almost weightless thanks to spring tension Table height adjustment via double cardan shafts, absolute parallel stroke, no adjustment during folding Thicknessing table with built-in feed roller, driven synchronously with the upper feed rollers, spring-mounted Height adjustment smooth via handwheel, precise measurement via mechanical digital display Replaceable extraction hood 150 mm 4 knife shafts; Tersa knives with slotted table lips Planing table dimensions: 2040 x 410 mm Planing width: 410 mm Max. planing height: 230 mm Motor power: 3 kW Speed: 5000 rpm Feed speeds: 8 + 14 m/min Weight: 560 kg Availability: upon request Dcolri Hhowhuivj Isg Location: Flörsheim

Condition: used, Year of construction: 1996, SCM FS410 Planer and Thicknesser Centrofix Blade Block New Replacement Blades Working Width: 410 mm Maximum Planing Height: 240 mm Total Worktable Length: 2050 mm Planer Stop Dimensions: 1100 x 170 mm Planer Stop Inclination: 45° Cutter Block Speed: 5000 rpm Cutter Block Diameter: 120 mm Thickness Feed Rate: 6-12 m/min Spiral steel feed roller Dcjlri Hhewhrt So Ieg Rough-textured steel feed roller Quick conversion system from planer to thicknesser in one go Mechanical digital display for thicknesser Motor power: 5.5 kW - Automatic motor brake Feed motor 0.55/0.75 kW Working height: 830 mm Extraction hood diameter for planer: 120 mm Extraction hood diameter for thicknesser: 120 mm Approx. weight: 700 kg Operation start-up

Condition: excellent (used), Year of construction: 1989, Planer and Thicknesser FS41 GEA – Casadei With slotted hole device, but missing collets Dcslewfflieri Hh Ijg The chassis is missing a drawbar Very stable, very good condition Year of manufacture 1989 Planer table: 2040 x 410 mm, thicknessing table: 700 x 410 mm 3 kW, shaft speed 5000 rpm Shaft diameter 120 mm, number of cutters 4, feed rate 8 – 14 m/min Maximum planing height 230 mm Weight 560 kg Table height adjustment, removable dust extractor hood New price was €8,800

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: spiral shaft Dressing table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 maximum passage thickness thickness planer: 250 mm height adjustment thicknessing table: electric display of planing thickness: mechanical digital display Feed speed: 6 / 12 m/min Feed roller: steel Outfeed roller: steel Dcslrisln Udzs Hh Isg table rollers: no Engine power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm Weight: 615kg

Condition: good (used), Planing width 630 mm Planing height 230 mm Planing table length approx. 2.20 m Two-knife spindle Motor 6.5 HP Manual table lift Weight approx. 1300 kg Djlrjwf Ur Eoi Hh Iscg No motor brake External dimensions approx. 2300 x 1400 x 1200 mm The data was taken from a brochure and is therefore without guarantee.

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine - Dcslri Hheu R S Awe Isg

Condition: new, Year of construction: 2021, New machine Year of manufacture 2021 Dimensions and weights Length ca.1725 mm width/depth ca.880 mm Weight ca.270 kg Dressing Chip removal max.4 mm Dcelrjkwhdlei Hh Ijg Connection suction Suction port diameter thickness2 x 120 mm Thickness Working height min.3 mm Working height max.230 mm Chip removal max.4 mm Electrical data Power drive motor4 kW Supply voltage400 V Mains frequency50 Hz Planing cutterhead TypeTERSA Number of planing knives3 pcs Speed5200 min¯¹ Planing width max.300 mm Feed rate Speed7 m/min Availability: short term Storage location. Hochheim

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter Dcolrocnxayji Hh Ijg No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: excellent (used), Planer thicknesser 600 mm Dcslri Hov Hpvvjh Iog 2 knife shafts (wedge knife shaft) Planing width 610 mm, 2 feed speeds 7/12 m/min Planing height 200 mm 5 HP, weight approx. 1150 kg Joining guide, table length 2000 mm Aigner auxiliary stop

Condition: new, Year of construction: 2025, Working width: 510 mm Planer block: Spiral shaft, 88 pieces, 15 x 15 x 2.5 mm, 37° Planer table length: 2250 mm Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 250 mm Thicknesser table height adjustment: electric Planer thickness display: digital display Feed speed: 5 / 8 / 10 / 16 m/min Feed roller: steel Extractor roller: rubber Pressure beam: articulated pressure beam Table rollers: no Dcoljlq Drwjri Hh Ieg Motor power: 9.2 kW Motor brake: yes, automatic Extraction connection: 150 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 900 kg

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, Dcjlri Hou R Sztsh Isg table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Dolerq N Easri Hh Ijcg Availability: short term Storage location: Solingen

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Dolri Hhodqy Uqo Iocg Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Stable-focused chain drive Steel drive wheels Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece

Condition: new, Year of construction: 2025, Working width: 510 mm Planer shaft: Tersa Number of knives: 4 Planing table length: 2250 mm Planing stop angle adjustable: yes 45° to 90° Maximum thickness of thickness planer: 250 mm Height adjustment of thickness table: electric Planing thickness display: mechanical counter Feed speed: 8 / 16 m/min Feed roller: steel Feed roller: steel Dcslrisvxi A Tj Hh Isg Pressure beam: articulated pressure beam Table rollers: yes Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 150 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 900 kg

Condition: used, -Sturdy steel and gray cast iron construction -Large, ribbed gray cast iron planing tables -Smooth operation due to high weight -Four feed speeds -Motorized thicknessing table lift with two speeds and digital display -Articulated pressure bar in the infeed -Precision-mounted four-knife shaft -Helical-toothed steel feed roller for particularly Delri Heu T Hq Ssh Iocg even and gentle wood feed -Rubber-coated feed roller -Large planing stop, tiltable from 90 to +45° -Standard auxiliary stop -Powerful industrial motor -Pneumatic quick-change system with pneumatic raising and lowering of the planing table -The extraction connection position is always in the same place for both planing and thicknessing, eliminating the need for an additional extraction hose or the need for cumbersome reconnection and repositioning around the machine required Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Planer: - Total length of tables: 2300 mm - Work table length: 1200 mm - Planer table width: 520 mm - Working height: 930 mm - Max. chip removal for planer: 6 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45 ° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: - Thickness table width: 520 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 250 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: Good Equipment and technical data: Maximum equipment for the professional, optionally with Tersa or spiral cutter block With TERSA cutter block for rapid blade changes TERSA cutter block system enables particularly quiet operation Helix-toothed steel feed roller for constant and even material feed Material feed with two speeds via separate motor The extra-long planing tables enable easy and precise planing of workpieces Work tables are made of gray cast iron, post-annealed and stress-free, thus robust and permanently flat Planing tables open simultaneously to the rear for short setup times Planer thickness table adjustment via handwheel with numerical display for planing height The heavy machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/gray cast iron construction Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller (ideal for economical planing of fine wood) Quality - Made in Europe Features: Tersa planer cutter block No more adjustments or screwing Planer cutters change in seconds Self-locking Extremely quiet operation Material feed Helix-toothed steel feed rollers for constant and even wood feed without marks Djlswbay Hori Hh Iocg Multiple teeth engage simultaneously for powerful feed Wear-free unlike rubber feed rollers Permanently mounted extraction hood Thanks to the permanently mounted extraction hood, reconnecting the extraction hose is no longer necessary during conversion. This saves valuable working time Simultaneous opening of the planing tables Simultaneous folding of the planing tables with tension spring support for quick and convenient conversion to thicknessing in seconds Thicknessing table adjustment FS 41 elite s with thicknessing table adjustment via handwheel with integrated display The thicknessing table is mounted on four large spindles, ensuring maximum stability under all working conditions. Thanks to the special lifting device, the table position is maintained perfectly even without locking. Kickback guards Solid kickback guards prevent workpieces from kicking back. The 4-knife cutter block ensures an optimal planing finish. Anodized aluminum planer fence Large dimensions (1200 x 150 mm) Easy to move Tilt from 90° to 45° via scale Standard with auxiliary fence for safe planing, even of narrow workpieces. Scope of delivery: Planer and jointer fence with round bar guide 2 feed speeds Tersa cutter block Technical specifications Planer total table length: 2200 mm Planer length of feed table Planer table height Planer working width: 410 mm Planer chip removal: max. 5 mm Planer fence dimensions: 1200 x 150 mm Planer fence pivoting range Thickness table dimensions: 775 x 410 mm Thickness working height: min. 3 mm mm Maximum working height: 240 mm Min. working length: Feed speed: 6 / 12 m/min Planer block speed: 5000 rpm Planer block diameter: 95 mm Number of planer knives: 4 Electrical connection: 400 V / 50 Hz Motor power: 5.0 kW Dimensions

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Dcslri Hshkz E Teh Iog Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: new, Year of construction: 2025, Working width: 410 mm Planer block: Tersa knives Number of knives: 3 Planer table length: 1800 mm Delrjgzlnuei Hh Ijcg Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: handwheel Planer thickness display: mechanical counter Feed speed: 6 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 4.4 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 2000 mm Machine width: 750 mm Weight: 325 kg

Condition: excellent (used), Planer-thicknesser HOLZKRAFT FS30c -used- TERSA planer shaft, table opening to the rear, helical toothed infeed roller, noise insulated, dust-tested ----- Technical data ----- Planing width: 300 mm, table length: 1,500 mm, max. chip removal: 3 mm, Planer shaft diameter: 72 mm, Number of knives: 3 pieces, Dsleu R S T Aori Hh Iscg Swivel range of planing fence: 45 °, clearance height: 230 mm, min. Workpiece thickness: 3 mm, min. Workpiece length: 300 mm, suction nozzle: 120 mm, weight: 264 kg Quality info: - Dressing tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked - Complete basic inspection - Complete basic cleaning - electrics checked - ready for immediate use

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Dslri Hhoih Dxds Iscg Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Working width: 510 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2250 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Planer thickness display: digital display Feed speed: 5 / 8 / 10 / 16 m/min Infeed roller: Steel Dcslrjtnf Rkji Hh Ieg Pull-out roller: Rubber Pressure beam: Link pressure beam Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Suction connection: 150mm Machine length: 2200 mm Machine width: 1050 mm weight: 900 kg

Condition: new, Year of construction: 2025, Description Delrioff Hdpe Hh Iscg Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, Year of construction: 2025, Working width: 410 mm Planer block: Spiral shaft Planer table length: 1800 mm Dolriegzlnxe Hh Iscg Planer stop angle adjustable: Yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: Handwheel Planer thickness display: Mechanical counter Feed speed: 6 m/min Infeed roller: Steel Outfeed roller: Steel Table rollers: No Motor power: 4.4 kW Motor brake: Yes, automatic Extraction connection: 100 mm Machine length: 2000 mm Machine width: 750 mm Weight: 325 kg

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Delrjff Hdmji Hh Iocg Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]