Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support Kodpfx Agsk Uqhas Ujdn a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Kdjdpfx Asppgcreg Uon Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Kjdpfsppgcyjx Ag Uedn Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Kodpewzvkhsfx Ag Uodn Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Kodpfx Ashnc E Aeg Uodn Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material Kdedpfx Ajxaamnog Ujn - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: new, dimensions: innen 1160 x 870 x 850 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 150 kg total power requirement 1,2 kW Kdsdpfx Agoxabuge Usn weight 160 kg range L-W-H 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump Kdjdon Smbrjpfx Ag Usn - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel Kjdpfxsn Smclo Ag Ujdn - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Kdjdpfeinwwzjx Ag Ujn Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Kodpfx Aoyxq Uisg Ujdn

Condition: good (used), functionality: fully functional, automatic pipe end deburring in continuous process --- Pipe length max. 600 mm Max. pipe diameter 30 mm Brush length approx. 450 mm Kjdpfx Aey Aa Ndsg Usdn Brush revolutions 2000 rpm 2 brush drive motors, 5.5 kW each

Condition: new, Year of construction: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and pipes in a single operation (approx. 3 seconds). Powerful industrial gear three-phase motor with frequency control, allowing stepless speed adjustment: 600 – 2,700 rpm. Designed for deburring pipes and profiles with material dimensions (horizontal/vertical) up to 120 mm. Easily adjustable working table height (adjustable and lockable) to match the required material size. Adjustable, lockable feed (carriage) of the deburring brushes to the working table via hand wheel with locking function. Drawer for dust residue collection. Sheet steel housing prepared for connection to an external extraction system. Folding covers for easy brush changeover. Machine body color: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Power cable with CEE plug. Operating tools included. 12 months warranty for single-shift operation. Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Kodpfsnvfl Ajx Ag Uodn Brush diameter: 250 mm Standard brush width: 60 mm. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST AN OFFER TODAY!

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm – 150mm adjustable Working width: 1150 mm Kjdpfsm Nlm Dox Ag Uedn Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. Kdedonah Taopfx Ag Usn The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. Kodpfx Aenah Tdjg Uodn The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Kjdpsm Rpy Rsfx Ag Ujdn Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2005, working width: 1,000 mm, Deburring machine Fab. LISSMAC Typ. SBM-B 1000 Year 2005 Kdjdsvgb Hgepfx Ag Uon Technical data Make: LISSMAC Type: SBM-B 1000 Year of construction: 2005 Passage width: 1000 mm Sheet thickness: max. 20 mm Sheet size min. length: 150 mm Sheet size min. width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Weight: approx. 1.5 t Equipment - Automatic material feed-through - Infinitely variable feed rate 0-10 m/min - Sheet thickness adjustment: Hand crank with worm gear and scale, infinitely variable - Brush depth adjustment: Hand crank with worm gear and scale, infinitely variable - Various accessories - Operating instructions All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Standard configuration Extended machine accessories Kjdpfx Aex S Dxbsg Ujdn

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Kdodpexpqy Refx Ag Ujn Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Kdjdod Hintspfx Ag Usn Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Year of construction: 1979, condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm workpiece length: 150mm Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Kjdpshg Nuiefx Ag Usdn Weight: 2t

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Kdedpfx Agsucw Dzj Uon

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, One machine for all tasks: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes The EdgeRacer the Grinder effortlessly removes slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the bottom side, allowing the steel pins to knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. The degree of edge rounding can be set by adjusting the brush feed. Deburring and edge rounding of thin sheet metal and 3D workpieces Deburr thin sheets or parts with cut-outs. The abrasive brushes can be lowered below the transport level so that the entire workpiece edge is processed. The oxide disc allows oxide layers to be removed from both internal and external contours. Kedpfewzybksx Ag Uedn Maximum working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Choose single-row processing to fully utilize the working width, either for wide panels or parallel loading. The brushes automatically change position to optimize tool wear. For narrower workpieces, select double-row processing to achieve double the throughput in just one pass.

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Kodpsd Ev Upofx Ag Uedn Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210