Used destacking device for sale (68)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Gjdpfx Adsyywl Recebn Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Gsdpfxsyywi Ae Adcsbn Total installed motor power Kw

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Gbodpfxed Siyds Adcjn Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables Godpfsflc T Sox Adcebn OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam Gbedpfxed Rg Dzs Adcjn N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Gbsdpfxod Rg Dps Adcen Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) Gbsdpfecggy Sox Adcon - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Godogvpn Iepfx Adcobn Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross Gbjdpfxed Tyvxo Adcen motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gbedpfet Ty A Ajx Adcjn Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) Gbodpfx Adec Ux Tmocjn 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Godpfx Adsc Ux Tlecebn Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Year of construction: 2004, condition: not inspected (used), functionality: unexamined, plate length: 3,000 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 3,000 mm Maximum stack height from floor: 1,600 mm EQUIPMENT Motion system: Suction cups Vacuum pump Gbjdpsyxnquofx Adcon The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. External reference: 7684

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, plate length: 2,200 mm, plate width: 1,000 mm, stack height: 1,600 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel length: 2,200 mm Max. panel width: 1,000 mm Max. stacking height of panels: 1,600 mm Number of stations: 2 MACHINE DETAILS Control system: WINDOWS Gjdpfx Adjyxnn Tocobn EQUIPMENT CE marking Panel stacking station Station discharge System suction cups Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at its destination. External reference: 7997

Condition: good (used), functionality: fully functional, automatic unloading from stand total length 4,5m arm length 100cm two columns total power 5kW Gjdpfx Adjy N N R Rocobn

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, RBO Portal Feeding System Advantage SC, Year 2006 The machine offered is being sold as a second-hand unit. The sale is made to the exclusion of any liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller provides no guarantee regarding functionality, performance, or suitability for any specific purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer no later than at the start of dismantling or loading. Gbsdpfeywfi Sox Adcen Miscellaneous No liability is assumed for hidden defects. All information about the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Gbodpfjwbp Nwjx Adcsn No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Gbsdpfx Adofi Tg Hecon

Condition: used, Height of the whole 320cm Arm length 350cm 360° manual rotation Suction cup gantry 220cm/120cm Adjustable in length and width 8 suction cups with a diameter of 30cm Maximum lifting height +- 140cm Minimum ground clearance +- 10cm Lifting capacity 175kg Electric rise and fall Gbsdpfjw Dnnqox Adcsn Manual rotation 380V

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Gbjdsvvuzcepfx Adcen Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: ready for operation (used), functionality: fully functional, Auction of a Joulin vacuum lifter with stacking function and infeed! The vacuum lifter is only 1.5 - 2 years old! The machine can be used as a standalone unit or as part of a complete line: - Bandsaw Canali ML 1100 TWIN F.L. 30 H.S. (Search ID: 21264817) - Wide planing machine Costa Planing Machine (Search ID: 21264937) TECHNICAL DETAILS Load capacity per layer: 300 kg MACHINE DETAILS Vacuum suction length: 6,000 mm Vacuum suction width: 1,400 mm Gbjdpfxjyk Tifs Adcjn

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. One side feeding suitable for line. Element width up to 1400mm Total length 4500mm Gbsdpfxew Am Nde Adcon Available immediately. Ready for work, possible to test.

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Gjdem Dqmaepfx Adcobn Stacking device one side feeding / also suitable for pallets. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Gbjdpoktfvfjfx Adcjn Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals.

Year of construction: 2018, condition: ready for operation (used), I sell the 4-side spraying automat Automatica 90° feeding system Gjdpfsw Ancfsx Adcsbn 4 x 2 spraying guns from each side Feeding system with motors. Good condition. Available immediately.