Used Dividing heads for sale (133)

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm Iedpfsd Inw Hox Ag Notn -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg

Condition: excellent (used), Year of construction: 2018, For sale Fourth axle from Haas HRT310 with 15 operating hours Year of construction 2018 Clamping surface diameter 310 mm Max. Weight on the clamping surface (with support) 197.3 kg Maximum weight on the clamping surface (unsupported) 98.7 kg Number of T-slots in basic configuration 6 x 60° Max. Max. speed 75 °/sec Torque (continuous) 407 Nm Weight 232 kg The dividing head can be inspected by arrangement in Upper Austria. The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding Itjdpfxju Haxlo Ag Njn

Condition: like new (used), Year of construction: 2020, CNC-4 axis dividing head for CNC BAZ - CNC milling machine Fabr.HOFMANN Type : HOWIMAT CNC 160.2 / Z - LEAN Bj.2020 Mint condition Only test run . Control Hofmann CPS 20 Spindle bore : 80 mm Chuck Röhm ZS 160 . Itjdsu Et Scjpfx Ag Non Documentation available . More data pull data sheets .

Condition: used, centre height 100 mm weight of the machine ca. 30 kg Isdpjwntzkefx Ag Nstn dimensions 300 x 250 x 400 mm

Condition: good (used), Internal item no.: 25031 Universal dividing head Manufacturer: Deckel Itodpfxjwvi Ddj Ag Nen Mount: SK40 Drawbar: S20x2 3 indexing plates (33-46 / 27-43 / 36-58) Tailstock

Condition: used, centre height 90 mm Ijdjvimwpspfx Ag Nstn spindle culvert in tie rod 25 mm transmission 40 : 1 weight approx. 41 kg  

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe Ijdpfed Inxpex Ag Netn -Tailstock comes: from a lathe -Tip height: 145 mm -Recording: MK4 -Dimensions: 410/260/H320 mm -Weight: 51 kg

Year of construction: 1983, condition: excellent (used), *complete with a RÖHM 4-jaw chuck diam. 200 mm Iedpfx Agomrnkzj Njtn Center hight: 160 mm

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Itsdpod Erdrofx Ag Njn Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros # 600033 Measuring travel program and test report of the final acceptance 100 euros # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: used, Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling Itodpfjcht Uvsx Ag Non -Dimensions: 600/500/H300 mm -Weight: 84 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Ijdpfx Aged Ebpkj Njtn -Tip height: 120 mm -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Itedpfx Aec Ih Sweg Nen -Tip height: 135 mm -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Itsdpfx Ajd Nn Ifjg Nsn -Tip height: 185 mm -Dimensions: 235/120/H170 mm -Weight: 32 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Iedpodzzg Sefx Ag Nstn -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 110 mm Iodpfjd N Apqox Ag Njtn -Dimensions: 218/117/H190 mm -Weight: 11 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Iodpfx Agsd Hvhro Netn -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 255 mm -Recording: MK4 -Dimensions: see drawing with the pictures -Dimensions: 600/220/H410 mm -Weight: 84 kg Itedpfx Asfwx Ugeg Njn

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder Isdpfx Agsd Ar U Ej Njtn -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm -Weight: 23 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm Itodjd D Nfgopfx Ag Njn -Weight: 23 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 155 mm Isded N Apnspfx Ag Netn -Dimensions: 100/120/H182 mm -Weight: 5.5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 75 - 180 mm adjustable -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg Ijdpfx Aed N Siiog Notn

Condition: used, Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: mm -Passage: Ø 32 mm -Part head: swiveling -Dimensions: 430/430/H280 mm Itjdpfx Agjdc R N Ts Nen -Weight: 83 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinder -Recording: MK5 -Tip height: mm Itsdpfx Aob E Aqusg Non -swiveling/rotating/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm Iedpehikzlefx Ag Notn -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: good (used), Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm Itedpfx Aef S Nc Ejg Nsn -Weight: 18.9 kg