Condition: good (used), Year of construction: 2007, Functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, TECHNICAL DETAILS Jointing milling: yes Multifunctional unit: yes Router unit: yes Drive speed: 25 m/min Pressure by means of: rubberized belt Edge thickness: 0.3 - 3 mm Number of units: 9 Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Automatic intervention after time: yes Motor power: 3 kW Speed: 9,000 rpm Csliqjv Eahyoy Dljrb Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Press roller conveyor edge: yes Number of press rollers: 7 With NC positioning: yes Assembled units in the part of the edge processing Unit 1: Head processing Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Unit 2: Router Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Unit 3: Multifunctional unit Manufacturer model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Unit 4: Router Number of motors: 1 Automatic intervention after time: yes Motor power: 5 kW Speed: 11,600 rpm Unit 5: Edge scraper Manufacturer model: PN10 Unit 6: Glue scraper Unit 7: Brushing unit Number of motors: 2 Spray unit: yes Control system: PC22 Barcode label reader: yes Safety standard: CE marking

Condition: refurbished (used), Year of construction: 2005, - Working thickness up to 60mm Celiqy Demftkmolorb - edge thickness max 3mm rolls, 12mm strips - gluing - caps - milling unit - scraper - buffing

Condition: ready for operation (used), Technical characteristics Celjupqb Ujiqy Dljrb Power and Motors Voltage: 400 V Pluging: Three-phased Power: 12,5 Kw Overall dimensions Lenght: 4388 mm Width: 1165 mm Height: 1385 mm Weight: 1200 Kg

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 (ca.) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.1518 Band Pressure zone + Edge coils supporting unit (No 1 reel) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Trimming unit 08.055.0.1680 (Kw 1,85 x 1) to rough upper edge protrusions (max mm 14) Fine Trimming unit 08.0587 (Kw 1.0 x 2) Multi Profile - 4 profiles Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw ? x 1) 20 m/min Profile Scraping unit (Multi-profile, by N.C.) 08.516 (4 profiles) Crolievtx R Njqy Dljb Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Free Space (To add a milling grooving unit)

Condition: used, Functionality: limited functionality, We are selling used solid wood edge banding machine Holzher 1356. - External dimensions: 275 x 90 x 126 cm - For solid wood laminates up to 20 mm - Gluing unit, pressing unit, planing unit, without trimming Creliqy Dov Nqw Heleb

Condition: excellent (used), Year of construction: 2018, AUTOMATIC SINGLE-SIDED EDGE BANDING MACHINE WITH AIR FORCE SYSTEM AND DOUBLE PUR GLUE UNIT AND PANEL RETURN SYSTEM Brand: Biesse Model: Stream B 10.5, CE Year of construction: 2018 Conditions: Excellent Delivery: On Request DESCRIPTION Single automatic edging machine for application of PVC, ABS, melamine, veneer and solid wood edges in strips or rolls. Sturdy machine, ideal for industrial or artisan use and for who use edgebanding machines for multiple applications, involving the use of a wide range of different types of panel and edging material. Robust, safe and reliable panel transport system for optimum holding of panels of all dimensions. Extra-large industrial chain with large, individually interchangeable pods. INVISIBLE EDGEBANDING No joints and no glue line, in perfect harmony with the panel. Air Force System based on the physical principle of convection. By using a compressed hot air system, the edge bonds perfectly with the panel guaranteeing resistance to water and heat and an excellent long lasting quality finish. TECHNICAL FEATURES Panel thickness: 10-60 mm. Panel width: 100-3200 mm. Panel length: 150-3200 mm. Thickness of edge-banding material in rolls mm.: 0,3-3 mm. Thickness of edge-banding material in strips: max 20 mm. Edge eight: min 15-max 65 mm. Panel overhang: 35 mm. Feed speed: 10-25 m/min. Working line height: 950 mm. Total power installed: 35 KW Pneumatic connection bar: 07-10 Suction flow rate: m/sec 30 Machine Weight: 7.500 KG Croliqyoruazao Dljb Overall dimensions: 15.500 x 4.700+1500 mm. (Stream B 10.5: 11.640 mm.) Documents: operation and maintenance manual, spare parts catalogue, electrical sheet, software manual, CE declaration of conformity WORKING UNITS 19" Control panel with SINTRA interface Working units control and automatic start of motors Edge magazine with 6 positions IR lamp Anti-adhesive and clean units: 3 positions Pre-milling unit Pre-melting system for polyurethanic glues: nr 2 Nordson AIR FORCE SYSTEM hot air Glue tank with quick release: nr 2 Nordson Linear edge trimming unit IT 90 P Tilting top and bottom chamfering unit 2 motor corner-rounding unit with Brushless movement and tool change magazine CN Edge scraper unit CN Glue scraper unit Spindle moulder unit/grooving unit: nr 2 Brush unit Air blower unit Belt presser Highly efficient chip suction system on all the working units Safety cabins with sound proofing Interior lighiting PANEL TURNER SYSTEM

Condition: good (used), Year of construction: 2014, Functionality: fully functional, feed rate X-axis: 24 m/min, edge thickness (max.): 3 mm, product height (max.): 60 mm, product height (min.): 10 mm, product length (min.): 150 mm, product width (max.): 3,200 mm, product width (min.): 100 mm, TECHNICAL DETAILS Type of edge applied: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunctional unit: yes Number of working units: 8 nr Software: SINTRA Advance speed: 25 m/min Panel dimensions Panel height: 10 - 60 mm Panel length: min. 150 mm Panel width: 100 - 3,200 mm Edge thickness: 0.3 - 3 mm Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Model manufacturer: RT30 Automatic intervention by time: yes Speed: 9,000 rpm Edge processing systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 6 Gluing system: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Prefusor model: HM20 Press roller conveyor edge: yes Number of press rollers: 4 With positioning of NC: yes Assembled units in the part of edge processing 1-6 Unit 1: Head processing Model manufacturer: IT90-S Processing speed: 28 m/min Speed: 12,000 rpm Unit 2: Edge milling machine Model manufacturer: RF10 Croliov Eabaeqy Dleb Speed: 12,000 rpm Unit 3: Multifunctional unit Model manufacturer: AR30 Automatic tool change: yes Processing speed: 18 m/min Speed: 12,000 rpm Unit 4: Edge scraper Model manufacturer: RB40 With positioning of NC: yes Aggregate 5: glue scraper Model manufacturer: RC20 Aggregate 6: brushing aggregate Model manufacturer: SZ30 Speed: 1,400 rpm Additional systems Spray aggregate: yes CE marking: yes MACHINE DETAILS Total installed power: 25 kW Conveyor and return system Drive speed: 24 m/min Parts return for edge banding machine: left Panel ejection: transfer roller conveyor Panel drive: motorized carpet

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors Coloc S Di Reiqy Dljrb magazine for strip edges kid for quick exchange of glue unit ...

Condition: ready for operation (used), Technical characteristics Panel thickness 10 to 60 mm Edge thickness 0,4 - 3 / 8 mm Minimum panel length 150 mm Calibration Gluing End cutting Trimming Rounding Radius scraper aggregate Glue scraper Brushing Power and Motors Crsliqeuaih Tsy Dlob Power: 8.6 Kw Overall dimensions Weight: 1600 Kg

Condition: good (used), Holzher sprint 1312 edgebanding machine Coliqy Djrun S Nelorb pre-milling patron glue, fast color change, heating up to 5min pneumatic pre-milling guillotine pressure rollers pre-cutting balls milling unit up and down R1 - R2 adjustable from the desktop profile cyclin flat pneumatic cyclone switched from desktop Edge thickness on roll 0.4 - 3 mm max. thickness of edge banding 8mm element height 45mm feed rate max11m/min machine in good condition, possibility of testing

Year of construction: 2001, Condition: ready for operation (used), Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 - DTR Crsliqy Dehcitrsljb TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm weight 2000 kg

Condition: as good as new (ex-display), Year of construction: 2023, ECLIPSE PRO SEMI-AUTOMATIC EDGEBANDER AND TRIMMER FOR CURVED (CONCAVE AND CONVEX) AND STRAIGHT WORKPIECES For small and large panels with thicknesses from 10 to 60 mm and edgebanding from 1 to 3 mm, consisting of two units: TECHNICAL FEATURES : Part and edge characteristics : Minimum/maximum part dimensions Round parts Min. Ø 300 Max. Ø 2700 mm Part thickness 10 to 60 mm Minimum radius depending on edge thickness Edge thickness 1 mm R= 30 mm Edge thickness 2 mm R= 50 mm Edge thickness 3 mm R= 80 mm Machine dimensions Dimensions in height 2000 x 2000 x 1700 Dimensions with arm 3400 x 3400 x 1700 Weight 600 kg Suction 1 x Ø 80 mm 1- GLUING UNIT : - Gluing on small or large open or closed edge lines (oculus) - Glue pan quick-release system - 1 kg capacity EVA Teflon glue pot - 1 gluing roller - 2 rollers for copying panel shape - 3 x 500 W heating elements with electronic temperature control and regulation. Crjliqyotzwybo Dlob - Manual regulation of glue quantity. - Automatic edge trimming system at the start of the gluing operation. - Reinforced workpiece support arm (common to trimming unit). -Leveling wheel with pneumatic lowering. Pedal and laser slow-down system with potentiometer (for small radii) - 7" color touch screen - Work surface for small parts. - Coil-type edge-holding table on three feet. - Ø 200 mm rotating holding plate with vacuum pump - On/Off automatic part feeder. - Encoder-controlled automatic coil edge-cutting shears for connecting the two edge ends on closed-curve panels. - Three processing options for closed parts: New LASER device for precision edge trimming to join closed parts. Encoder for overlapping, cutting and heating the edge. (Manual jointing) 2- RETRACTABLE TRIMMING UNIT : - 2 high-frequency 15000 RPM 0.5 Kw motors with top, bottom and front copying. - New trimming unit front copying adjustment system (located externally). - On/Off trimming unit - Pneumatic opening of both motors to facilitate part insertion. - 1 Set of 2 R=3, Z=6 welded carbide milling cutters Work surface for small parts. (Retractable shelf) Reinforced workpiece support arm (common to gluing unit) - Pneumatically retractable trimming unit for gluing the edges of large parts (clears the area). OPTIONS INCLUDED : 109462 Automatic glue feeder with laser sensor 109473 Wide-shouldered drive roller for better adhesion 109474 Additional bottom roller with support for better adhesion 109478 Round work surface, diameter 125 mm 109475 Rectangular table (800 x 360) for large parts

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) BATCH-SIZE ONE (with "BARBARIC" System) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (LASER - Max 60) Coloul Su Ieiqy Dljrb Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 with infeed rollers conveyour SFR In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. 1st Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.1518 + 283.203 2nd Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42 / 30 / B (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555.0.1.1680 (Kw 1,85 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 HS / LS1 (Kw 1 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 20 (Kw 0,5 x 1) max 20 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 HS / LS1 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) No. 2 Grooving units 08.190 (Kw 4,5x2) swivelling 90°/180°/270° (adjustable by CN Horiz+Vertic) With BARBARIC Automation with 2 TSRET Manipulators and 2 Portals

Condition: new, Year of construction: 2023, GENERAL A complete and versatile edge banding machine for small and medium sized companies that can carry out a wide range of processing operations to a high quality standard in a small space. The SCM olympic 500 is available with both pneumatic and electronic unit adjustment and enables the processing of 2 radii, each with its own tool for workpieces with a minimum width of 60 mm. HIGHLIGHTS - quick and easy change of EVA and PU glue thanks to SGP-E glue pot - 2 radius processing on all units with multiedge tool - large touch-screen control panel with 'Maestro Active Edge' surface OPTIONS INCLUDED Interior lighting of the cabin and the gluing area NESTING sensing rollers 3 x release agent spraying unit Glue container' SPG-E (quick change color/glue type) 1.5 kg Edge preheating with infrared radiation K2-Radius snipping unit incl. automatic positioning for (straight, chamfer and radius snipping) Crsliqoq A Tyzey Dlsb Chamfer and radius trimming unit R-HP incl. automatic pos. for e.g. chamfer trimming thin edges or flush trimming solid edges ROUND 2-A rounding unit for processing 1 radius and 1 thin edge Radius scraper unit RAS-A Surface scraper unit RC-N TECHNICAL DATA Edge thickness 0.4 - 6 mm panel thickness 8 - 60 mm min. panel width 60 mm Feed speed 12 m/min Machine length approx. 4700 mm

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Overall dimensions Creliqy Deui Ebnjleb Lenght: 2910 mm Width: 1800 mm Height: 1240 mm Weight: 850 Kg

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls Celijt Hxxpoqy Dlorb top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition

Condition: ready for operation (used), Technical characteristics Part thickness : 8 to 50 mm Edge thickness: 0.4 to 8 mm Programmable control with group indexing Feed rate 11 m/min Composition: Edge insertion device Milling unit (straightening) Pre-melting device Edge magazine End cutting unit Milling unit (flush) Form milling unit Surface scraping unit Polishing brushes Suction nozzles : 1 x ⌀ 120 mm / 3 x ⌀ 60 mm / 1 x ⌀ 100 mm 6 bar pneumatic system Compact and complete machine Power and Motors Voltage: 400 V Cslet Hncweiqy Dlorb Pluging: Three-phased Power: 10,5 Kw Overall dimensions Lenght: 4860 mm Width: 900 mm Height: 1610 mm Weight: 2000 Kg

Condition: good (used), Felder G460 edgebanding machine pre-mills Csliqsq U A Uioy Dlsrb glue granulate tank, applied by roller pre-cut guillotine pressure rollers pre-cutting balls top and bottom milling cutters flat cyclin, so called glue cyclin polisher thickness of the edge 0.4-3mm feed rate 9m/min max workpiece thickness 45mm machine ready to work possibility of presentation. Compact dimensions machine length 270cm

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 5250 mm Croliotrihkoqy Dljb Width: 1600 mm Height: 1500 mm Weight: 1600 Kg

Condition: ready for operation (used), Technical characteristics Power and Motors Celiqyjtu R Sdo Dlsrb Voltage: 400 V Pluging: Three-phased Overall dimensions Weight: 1428 Kg

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Creliqstrihvsy Dlsb Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw

Condition: ready for operation (used), Technical characteristics Epaisseur de panneau maxi50mm Epaisseur de panneau mini8 mm Epaisseur de chant maxi3mm Csliqetupfdey Dlorb Epaisseur de chant mini0.4 mm Caractéristiques plaqueuseEnd cut unit Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Calibration of 2 diamond tool holders Gluing with hot melt glue tray Automatic edge feeding Pressure group Tiltable end cutting Straight / chamfer / 1/4 round trimming Edge scrapers Brush Capacity : panel thickness 50 mm edge thickness roll 0.4 - 3 mm edge thickness strips 8 mm Feed 10m/min Power and Motors Overall dimensions Cjlijttrp Ssqy Dlsrb Lenght: 3700 mm

Condition: ready for operation (used), Technical characteristics motorized scraper edge length cut workpiece height max: 65 mm - min 11 mm Coliqy Dotriiaslorb max temperature setting 400 ° C feed speed 4m / min quick settings easy to use without compressed air for pre-glued PVC, melamine and polyester Power and Motors Voltage: 220 V Overall dimensions

Condition: ready for operation (used), Technical characteristics Composition : Pre-milling unit Crsliqjtrihnoy Dlob Gluing unit End cutting unit Milling unit Glue scraping unit Touch screen control Maximum workpiece thickness : 55 mm Maximum edge thickness: 2 mm Feeding speed : 5.5 m/min Extendable parallel bar 5 x 100 mm diameter suction nozzles Power and Motors Voltage: 380 V Pluging: Three-phased Power: 9,8 Kw Overall dimensions Lenght: 2389 mm Width: 1125 mm Height: 1305 mm