Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, injection pressure: 1.45 bar, injection weight: 88 g, total length: 3,510 mm, total width: 1,220 mm, total height: 1,900 mm, overall weight: 3,000 kg, heating capacity: 6.9 kW (9.38 HP), power: 21.9 kW (29.78 HP), Engel 200/40 injection molding machine Technical data: Screw diameter 30mm Dolim Ueryxl Te N Ujut Injection weight 88g Injection pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of the clamping plates 550x430mm CC90 control system (Norwegian language) Weight 3000kg Dimensions 3.51x1.22x1.90m Heating capacity 6.9 kW Total output 21.9kW Location: Austraße 34 57076 Siegen

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Pump motor 18.50 KW Weight 7,400 KG Dujlievu Dncsm U N Ust

Year of construction: 1998, Condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Duelimov Sufao U N Ujt

Condition: excellent (used), Year of construction: 2008, operating hours: 24,896 h, Functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, ejector stroke: 150 mm, plate length: 750 mm, plate width: 750 mm, total length: 5,800 mm, total width: 1,700 mm, total height: 2,300 mm, overall weight: 9,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine ENGEL VICTORY 1050-130 Tech warehouse no.: 503505 manufacturer: ENGEL type: VICTORY 1050-130 Tech controller: CC200 year of construction: 2008 Delimeugvxrj U N Ujut operation hours: 24896 h technical data clamping unit clamping force: 1300 kN size of mould plates h x v: 750 x 750 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 61 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm weight of mould: 540 kg technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1650 bar screw length: 20 l/d screw stroke: 215 mm screw speed: 230 min injection rate into the open: 230 g/s PS number of heating zones: 5 nozzle stroke: 350 mm measures & weight measures of machine l x w x h: 5.8m x 1.7m x 2.3m total weight: 9500KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface EUROMAP 67 interface for ejector plates safety Schuko-socket 10A mould heating 8x

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest. Duelimsl Tnz Ej U N Uet

Condition: good (used), Year of construction: 2009, CC200 control Dusljv D D N Eoim U N Uet Clamping force: 180 t Between bars: 520x520 Min/Max mold height: 250-600mm Screw diameter: 45mm Maximum injection: 210g

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Djlimor Hrqrj U N Uout Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Year of construction: 2019, Condition: ready for operation (used), General Data Djlim Ujv T D S Ee N Usut Machine weight 7100 kg Control Unit Brand ENGEL Additional Equipment Clamping unit with standard Euromap platens and safety components Hydraulic system with energy efficiency and low noise Microcomputer CC300 package with 215-inch full-HD color touch-screen Mold cooling with water terminal and flow control Machine mounts in standard execution This Engel VICTORY 500 /120 SPEX was manufactured in 2019. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2011, operating hours: 56,000 h, Sell Injection machine Arburg 570-2000-800 2011 year In very good technical and visual condition very quiet operation no oil leaks Control selogic Bimetallic injection system Fi 45 1 x air Duelimjukirbj U N Uet 2 x hydraulic core robot output

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, Functionality: fully functional, clamping force: 200 kN, For sale is an injection molding machine of the brand KraussMaffei and the type KM 200-220/220 CZ Multinject The machine is in a fully functional and well-maintained condition Technical data Year of construction: 2007 Clamping force: 200 t Aggregates: 2 Automatic hours: 47 963 Dimensions: 5200*2200*2700 mm Weight: 11,500 kg Further technical data will follow shortly Offer refers only to the machine, the peripherals shown in the pictures are not part of the offer On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Duslim Ujrvimbj N Uet PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2003, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,120 mm, overall weight: 6,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie-bars h x v: 470 x 470 mm Dslsvxgqnoim U N Ueut size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2.12m total weight: 6000KG equipment included screen text german CEE-socket 16A CEE-socket 32A core pulling hydraulically 2x air valve moveable WAP machine without material hopper machine without water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Condition: like new (used), Year of construction: 2008, Krauss Maffei KM 420-2000 CX Excellent condition LIKE NEW! Only 6000 hour in automatic cycle Clamping/Injection Matrix • Clamping force: 4200 kN • Mounting plate dimensions (h × v): 1270 × 1230 mm • Clearance between columns (h × v): 800 × 800 mm Duslimov Ax Hvs U N Uet • Min./max. mold height: 580 - 1020 mm • Maximum opening width: 1600 mm Injection Unit • Screw diameter: 75 mm • Injection volume: 1237 cm³ • Shot weight: 1126 g • Injection pressure: 1635 bar Electro-Hydraulic Equipment • Power rating of the pump motor: 75 kW • Power rating of barrel heating: 29 kW Dimensions and Weight (Approximately) • Net weight with control cabinet: 24.8 t • Dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Type: Horizontal Drive: Hydraulic

Year of construction: 2004, Condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw Dujlisgbpnmjm U N Ujt 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Year of construction: 2007, Condition: ready for operation (used), Various old injection molding machines are available. 1) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100000h. 4) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of construction: 2006, operating hours: approx. 105000h. 5) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 6) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 7) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 8) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 67000h. 9) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of construction: 2007, operating hours: approx. 98000h. 10) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 11) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2000. 12) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2001. 13) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107000h. Documentation available. On-site inspection is possible. Individual sale possible. Duelim U Nov R Ew De Uot

Condition: good (used), Plastic injection molding machine : Brand: BMB Type: KW650/3500 650 tons Year: 1999 Weight: 32500kg Power : 128 kW Duslim Uoik H Ens N Uot Distance between H-V columns: 860x760mm Min-max mold thickness: 250-900mm Movable platen stroke: 1000mm Recent parts installed on the press: 04/2020: hydraulic safety valve on mold-holding platen: €1414 07/2021 : Hydraulic pump + coupling : 4666.74€ HT 07/2022 : More than 5000€ spent on electronic cards Optional robot: €7,000 Brand : Sepro Type : SR 4030 S3 Year : 01-08-2006

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Closing unit: Closing force 5300 kN Connection for Euro 18 robot Dslim U Nsvvlv Rj Ujut Safety door Condition: used Scope of delivery: (See picture) Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 118,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine BATTENFELD HM 10000-9200 warehouse no.: 503007 manufacturer: BATTENFELD type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 operation hours: 67092 h technical data clamping unit clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm ejector stroke: 300 mm ejector force: 118 kN centering diameter of moving platen: 250 mm centering diameter of fixed platen: 315 mm technical data injection unit screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar screw length: 22 l/d screw stroke: 500 mm screw speed: 130 min screw torque: 11370 N plasticising rate: 144 g/s PS injection rate into the open: 1144 g/s PS number of heating zones: 8 nozzle stroke: 700 mm measures & weight measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG equipment included screen text german Deljvw R Eysim U N Ujut complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x

Condition: like new (used), Year of construction: 2015, SERVO machine Clamping force: 350 ton Max opening: 730 mm Min. mold height: 350 mm Max. mold height: 745 mm Plates dimensions: 1040 x 1060 mm Distance between tie bars: 720 x 720 mm Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1212 cm³ Shot weight: 1103 g Machine has only: 27,000 hours 2 x core pullers on moving platten Dujljvf Hvkoim U N Ujt 12 x hot runners New screw in 2017 30% glass

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Year: 2000 Dolim U Njrdg Tpo Uout IPC not working (see map)

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Dolieu Ekaqom U N Uout Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Condition: like new (used), Year of construction: 2020, Clamping force: 88 t Screw: 36 mm Shot weight: 167g /PS Duolimsvx Uyws U N Uot

Condition: used, Year of construction: 2001, Clamping force: 250 t Screw diameter: 70 mm Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Duolimovbbvke U N Ust Core pullers: 2x Air valve: 1x Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Duelimergw Exe U N Uot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: good (used), Year of construction: 2001, Arburg 570 C 2200-1300(2001) Clamping force \- 220 ton Screw diameter: 60 mm Shot weight: 607 g/PS Stroke volume: 664 cm³ Heating capacity: 23 kW Opening stroke: 650 mm Delisuy Ryaom U N Uout Distance between bars: 570 mm Mould height min: 300 mm Mould height max: 950 mm Size of mold platens: 795 x 795 mm

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Duolim Ujv U Dn Nj N Ujt Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC