Year of construction: 2017, Condition: ready for operation (used), Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation. Foln Usk N Dnds Stgogb

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 130 - 380 CX injection molding machine Year: 2005 Controller version: MC5 Technical details Clamping unit Clamping force: 1300 kN Mould opening force, max.: 70 kN Fgsln U Ssv H Au Sjtgsb Moving platen feed force Opening: 35.4 kN Moving platen feed force Closing: 31.4 kN Mould platen size (h x v): 840 mm x 840 mm Distance between pressure beams (h x v): 530 mm x 530 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Daylight max.: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 23 Injection pressure: 1860 bar Sweep volume: 201 ccm Injection weight, PS: 183 g Injection rate: 377 ccm/s Screw speed: 390 1/min Maximum plasticization rate: 25 g/s Nozzle pressure: 50 kN Electrical and hydraulic equipment Nominal pump motor capacity: 18.5 kW Installed heating power: 8.12 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1700 1/h Drying cycle time: 2.1 sec. Tank capacity: 489 ltr. Dimensions and weight Machine dimensions: 4.30 m x 1.6 m x 2.1 m Total machine weight: 5600 kg

Condition: excellent (used), Year of construction: 2017, Clamping force : 100 ton Screw diameter : 45mm Injection volume : 318cm3 Fgolnsvzy Dge U Stgjb Injection preussure : 1590bar Clamping stroke : 350mm Mold height : 350mm Daylight : 600mm Platen size : 1100 x 600mm Rotary table size : 1200m 2 units available: Year 2016 : 3562 hours Year 2017 : 1416 hour Both are Chinese Engel production

Condition: excellent (used), Year of construction: 2019, operating hours: 9,900 h, Functionality: fully functional, Injection molding machine Engel VC200/50 Year of manufacture 2019 / approx. 9900 operating hours Engel control system Total height: approx. 1,800 mm Total length: approx. 3,800 mm Total width: approx. 1,500 mm Total weight approx. 2,900 kg Clamping force 500 KN Screw diameter 30 mm Table ejector stroke 100 mm Injection pressure 200 bar Heating zones 4 Fgsln Uevx T U Te Stgob 10x heating channel / core pull on ejector side Opening stroke max. 400 mm Robot pneumatics Engel ER-USP5 (year of manufacture 2019) Dryer Motan Luxor CA 15

Condition: good (used), Year of construction: 2005, 1x used Arburg 420C 1000-250 Year of construction: 02/2005 Feln U Steuzwpqegegb Ma-No. 196692 Auger 30mm Installation height extended to 350mm Blow out: 1x Core pull: 1x Handling interface Master computer interface Printer interface Interface inking device The machine is sold without any other visible peripherals / tools!

Condition: good (used), Temperature Card ARBURG Dialogica 7204-3504C1 SN 126.642 yPIII function tested Fgjln Ujmxk D Se Stgeb

Year of construction: 2000, Condition: ready for operation (used), Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h. Fgoln U Sjq Sxhfotgeb

Condition: excellent (used), Year of construction: 2006, Arburg 37U 600-290 injection molding machine Year of production - 2006 Closing system: clamping force: 600 kN distance between columns h x v: 370 x 370 mm size of mold plates h x v: 510 x 510 mm min. mould height: 200 mm max. daylight: 600 mm opening stroke: 400 mm ejector stroke: 125 mm ejector force: 30 kN Fsln U Stev Hm I Aogogb Injection system screw diameter: 35 mm injection volume: 144 ccm injection weight: 132 g injection pressure: 2000 bar screw length: 20 l/d screw torque: 450 N injection speed to the hole: 140 g/s PS number of heating zones: 4 nozzle stroke: 240 mm Dimensions and weight machine dimensions L x W x H: 3.8m x 1.45m x 2.12m total weight: 3500 kg

Condition: excellent (used), Year of construction: 1998, Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General information Fgjlnjvnmc As U Stgsb Product Code: 186 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,300 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420 x 420 mm Platen size: 605 x 605 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 88000 h Weight: 4080 kg Dimensions: 4,5 x 2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: good (used), Year of construction: 2003, operating hours: 40,364 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 43 mm, clearance between the columns: 510 mm, column diameter: 115 mm, displacement volume: 351 cm³, injection pressure: 2,454 bar, mold height (min.): 210 mm, ejector force: 50 N, ejector stroke: 220 mm, opening stroke: 630 mm, plate width: 860 mm, plate height: 860 mm, overall weight: 14,000 kg, heating capacity: 13.1 kW (17.81 HP), pump power: 30,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, SANDRETTO NOVE S 220/860 injection press from 2003 Fgeln Usvy Tpte Stgeb

Condition: like new (used), Year of construction: 2018, Engel insert 200V/45 shuttle -XS (2018) Vertical machine Controll : CC300 Clamping force: 45 t Screw diameter: 30 mm Shot volume: 99 cm3 Type: Vertical Drive: Hydraulic Foln U Stsuxnfdjgsgb Platen size HxV : 780x400mm Screw diameter: 30 mm Screw stroke: 140 mm Maximum injection capacity: 99 cm3 Injection pressure 1450 bar Injection pressure max . 2210 bar Nozzle stroke 530 mm Clamping force 450 kN Opening stroke 405 mm Maximum distance between platen 590 mm Platen size horizontal x vertical 780 x400 Ejector stroke 105 mm Total weight (without oil) 5,2 tons

Condition: good (used), Ralaiscard Modul +B02 Fgeln U Semxky Dotgsb NR 006353 SN 138.245A

Year of construction: 1999, Condition: ready for operation (used), Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power. Feln Usnxk Ife Stgjgb

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Screw speed: max. 51 rpm Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Machine optimization / user support package Software package "Quality assurance" Documentation package Feln Uev Hmvge Stgegb

Condition: good (used), Year of construction: 1995, operating hours: 30,919 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, column diameter: 85 mm, displacement volume: 318 cm³, injection pressure: 1,926 bar, mold height (min.): 155 mm, ejector force: 50 N, ejector stroke: 160 mm, opening stroke: 500 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,980 mm, total width: 1,500 mm, total height: 2,080 mm, overall weight: 7,000 kg, heating capacity: 12.8 kW (17.40 HP), pump power: 22,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, Injection press SANDRETTO OTTO 150/612 SEF 100 in good working order Fgjln U Stevy Th Ajgob

Condition: excellent (used), Functionality: fully functional, ARBURG control cabinet temperature chart. Fgsln Uorh E I Rs Stgob ARBURG 730 S-N 139.656 A ARB 730 SN. 139.655 V. 01

Year of construction: 1995, Condition: ready for operation (used), Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t. Fgsln Uoh H Nrze Stgjb

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Fjln U Ssrn I Nretgjgb Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Condition: excellent (used), Year of construction: 2010, operating hours: 20,150 h, Functionality: fully functional, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 650 mm, column diameter: 130 mm, displacement volume: 658 cm³, injection pressure: 1,985 bar, mold height (min.): 200 mm, ejector force: 87,000 N, ejector stroke: 130 mm, opening stroke: 710 mm, plate width: 980 mm, plate height: 980 mm, total length: 7,540 mm, total width: 1,910 mm, total height: 2,310 mm, overall weight: 14,000 kg, heating capacity: 16.7 kW (22.71 HP), pump power: 37,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, Injection press SANDRETTO NOVE 1300HP/320 from 2010, production activity of PE containers for bodywork painting. Machine equipped with a masterbatch doser and three-phase power supply Folnsvy Tdds U Stgegb

Condition: excellent (used), ARBURG Circuit Board 533 C B 41 Fgoln Uem Dtlzs Stgsb SN 94. 519 S-N 97.940 NR. 00202

Year of construction: 1991, Condition: ready for operation (used), Clamping force: 800kN, weight: 4.3t. Foln Ush I T D Aj Stgogb

Condition: like new (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2000 Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Fjln Uoq Tbdks Stgsgb Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Year of construction: 2008, Condition: ready for operation (used), Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t. Fjln U Stomrrh Uegjgb

Year of construction: 1986, Condition: ready for operation (used), Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed. Fgeln U Stepvkzyegob

Year of construction: 1995, Condition: ready for operation (used), Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools. Fsln U Selc N Saetgegb