Condition: excellent (used), Year of construction: 2020, operating hours: 9,900 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, injection pressure: 2.025 bar, ejector force: 22 N, ejector stroke: 150 mm, TECHNICAL DETAILS Closing force of the mold: 800 kN Mold opening force: 120 kN Clamping platen dimensions (h x v): 640 x 590 mm Clearance between the columns (h x v): 485 x 435 mm Opening stroke of the mold: 350 mm Mold height: 150 - 400 mm Opening width: 750 mm Ejector stroke: 150 mm Dksljul Uihsqxzh Tol Ejector force forwards/backwards: 22 / 10 kN Ejector speed: 350 mm/s Injection unit Screw diameter: 25 mm Ratio Ls/D: 20 Injection pressure: 2.025 bar Injection volume: 49 cm³ Injection weight: 45 g Injection speed: 125 mm/s Injection capacity: 61 cm³/s Screw speed: 382 1/min Plasticizing capacity: 7.8 g/s Torque: 89 Nm Thrust of the nozzle: 21 kN MACHINE DETAILS Net weight with control cabinet: 5.9 t Machine dimensions (L x W x H): 4.80 x 1.60 x 1.88 m Connected load: 6.1 kW Fuse rating: 63 A Installed heating capacity: 6.3 kW Number of cylinder heating zones: 4 Drying time / stroke according to Euromap 6: 1.5 s / 340 mm Oil tank capacity: 120 dm³ EQUIPMENT - Five-point double-lever toggle clamping unit mechanism (three-platen unit) with servo-electric drive - Injection unit with servo-electric drive for injection and plasticizing as well as servo-hydraulic drive for moving the entire injection unit - MC6 control system based on an industrial PC with real-time Ethernet technology - Plasticizing system with a screw diameter of 25 mm, nozzle radius 10 mm, nozzle opening 4 mm

Condition: good (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2000 Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Deleuipbrsqxzh Tokl Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Djlqxzheuc Szzo Tjkl

Condition: excellent (used), Year of construction: 2003, operating hours: 54,000 h, Functionality: fully functional, machine/vehicle number: 75-268, clamping force: 270 kN, screw diameter: 52 mm, clearance between the columns: 630 mm, displacement volume: 580 cm³, injection pressure: 2.2 bar, injection weight: 580 g, mold height (min.): 250 mm, plate width: 940 mm, plate height: 880 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 3,500 mm, overall weight: 10,000 kg, connection type: Euromap, The machine has been fully operationnal until last month, the machine is including a Dal Maschio Robot from 2013 : DMG Type 3 ; DMGP4999 Dkslqoq Nn Itjxzh Tel

Condition: excellent (used), Year of construction: 2010, Clamping force: 3200 t Tie bar distance: 2240x1800 mm Dkslqxzhsu N Tg Uj Tol Mould height min/max: 600-2000mm Platen size HxV: 3020x2680mm Max mould weight: 81000kg Screw dia: 215mm Injection volume: 38120 cm3 For more information contact us.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, injection pressure: 2.42 bar, ejector force: 95 N, ejector stroke: 250 mm, plate length: 1,230 mm, plate width: 1,270 mm, TECHNICAL DETAILS Closing force of the mold: 4,200 kN Mold opening force: 250 kN Dimensions of the clamping platen (hxv): 1,270 x 1,230 mm Distance between the standard columns (hxv): 800 x 800 mm Distance of the mold opening: max. 1,020 mm Formwork height: min. 580 mm (380 mm standard + 200 mm extended - ZE45.462) Panel opening stroke: max. 1,600 mm (1,400 mm standard + 200 mm extended - ZE45.462) Ejector stroke: 250 mm Ejection force forwards/backwards: 95 kN / 49 kN Injection unit Screw diameter: 60 mm Ratio Ls/D: 23.3 Injection pressure: 2,420 bar Injection volume: 792 cm³ Injection weight: 720 g Injection speed: 130 mm/s Injection speed: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s at standard screw speed Thrust force of the nozzle: 82 kN Pump motor power: 75 kW Installed heating power: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle ZE33.00) Drying time / stroke according to Euromap 6: 3.0 s / 560 mm Required oil volume: 1,000 dm³ MACHINE DETAILS Net weight with control cabinet: 21.5 t Machine dimensions (L x W x H): 6.90 x 2.49 x 2.38 m Maximum tool weight: 6,700 kg EQUIPMENT - Fully hydraulic clamping system - MC 5 control system with color monitor, integrated control panel and integrated platen station - Plasticizing system SP 2000 Djlqxzheul Ug He Tokl - Complete plasticizing system for thermoplastics with 60 mm screw diameter, non-return valve and open nozzle, nozzle radius 15 mm, nozzle opening 6 mm

Year of construction: 2002, Condition: excellent (used), Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2002 Number of working hours : 64763 Injection parts: Screw diameter: 45 mm Injection weight: 240 g Injection pressure: 2500 bar Injection volume: 286 ccm Closure elements: Closing force: 200 t Clearance between columns: 520x520 mm Dimensions of table plates max: 685x685 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Accessories: Euromap Robot interface Dimensions: Dksljm Sglqjqxzh Tel Weight: 6630 kg Length/Width/Height: 5.35x1.93x2.20 m Power Supply: Pump/motor: 30 kW Heaters: 14.9 kW Total: 44.9 kW

Condition: excellent (used), Year of construction: 2011, operating hours: 37,500 h, Functionality: fully functional, machine/vehicle number: 181517, clamping force: 4,000 kN, screw diameter: 60 mm, injection weight: 700 g, Injection machine 2K 60 mm - 35 mm, in very good condition with few hours of work. Machine in operation in Sabadell. Machine equipped with a Wittmann robot of 2014. With safety grid and 2 belts. Dolqxzsvgq Hpsh Tokl

Year of construction: 2024, Condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Deljqvuigsqxzh Tjkl

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, opening stroke: 1,800 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Clearance between the columns (hxv): 1,025 mm x 930 mm Mold height: min. 450 mm Mold height: max. 950 mm Opening width: max. 1,800 mm Screw diameter: 90 mm (barrier) Injection volume: 2,480 cm³ Injection quantity: 2,254 g Rated power of the pump motor: 55 kW Heater output: 62 kW Tank capacity: 1,000 l Pneumatic cascades: 4 pieces Dslqxeul Ubwezh Tskl EQUIPMENT - Engel ERC robot

Year of construction: 2000, Condition: excellent (used), Injection moulding machine Arburg 221 K 350 - 100 U Year of manufacture: 2001 Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min. 150 mm - 300 mm Maximum opening distance: 200 mm Max distance between plates: 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Djlqxzhjp At Rdj Tokl Injection pressure: 2500 bar GENERAL DATA Engine: 7.5 kW Heaters: 4.5 kW Operating hours: On request Dimensions L x W x D: 2.7 m x 1.4 m x 2.2 m Weight: 1060 kg

Year of construction: 2024, Condition: new, Demag NC3 panel new never used width- 30cm height- 5cm length- 50 cm Dkolqxzjqvuineh Tsl

Year of construction: 2007, Condition: excellent (used), Injection moulding machine TOSHIBA IS 450 GSW Year of manufacture - 2007 Parameters: Closing force : 4410 kN Screw diameter : 70 mm Injection volume: 1480 cm³ Dkolqxzsm Sgr Teh Tel Injection weight: 1360 g Min. clamping plate height: 1230 mm Min. clamping plate width: 1230 mm Spacing between columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 litres Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22000 kg

Year of construction: 2022, Condition: like new (used), New injection unit for Boy machine Silicon Screw dia: 32 mm Dslqxzen R D Ereh Tjkl Material : Silicon Condition: new never used (new cost: 20.000€)

Condition: excellent (used), Year of construction: 2001, Battenfeld injection molding machine TM 4500/2800 Year of manufacture 2001 Control Unilog B4 There are 4 machines available the same ( 2001,2002 ) Closing system : Closing force 4500 kN Minimum mold height 425mm Maximum mold height 770mm Column spacing 800 x 800mm Dimension of mounting plates 1155 x 1195mm Mould opening stroke 760mm Injection unit Screw diameter 75mm Injection weight (ps) 1506g Injection volume 1657cm3 Specific injection pressure 1739bar Robot interface Euromap 12 Machine dimensions : 8.3 x 1.9 x 2.4 Weight : 20400 kg Dkslqet Ef Insxzh Tjl Oil tank capacity : 800 liters

Condition: good (used), VT 5041-21/3-OD Dkslqxzou Ilmkeh Tsl

Year of construction: 2002, Condition: excellent (used), Injection moulding machine Demag Ergotech 250/630 - 1450 Year of manufacture - 2002 Control - NC4 Screw diameter [mm] -60 Injection size [g]: 690 Injection pressure [bar]: 1905 Short-circuit force [kN]: 2500 Column spacing [mm]: 630 x 630 Plate dimensions [mm]: 950 x 950 Djlsm Sg Hreqxzh Tskl Min. mould height [Mm ]: 330 Bimetallic injection system Air valve on moving platen Core - 2 Euromap 12 Heated ducts

Year of construction: 2012, Condition: excellent (used), Hopper loader SAL-6U-3-CE Dkolqxsu H U Izjzh Tol description : 37 kg / 1 palette

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 Dkslqxzhstrya Rj Tol - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), 100 kW 470 kg, 130x80 cm on europallet, H 700 mm Dolqou Axinoxzh Tskl Loher MOTOR JNGA from injection molding machine Krauss Maffei 650 tonne

Year of construction: 2010, Condition: excellent (used), Krauss Maffei KM 180 - 750 AX injection molding machine Dkslqxzhsn Atndj Tjl Fully electric machine Year of manufacture -2010 Replaced new plastification system motor MC5 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Closing force of the mold: kN 1760 - Clamping plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Mold opening path max: mm 450 - Mold installation height min/max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: kN 49 Injection unit - Auger diameter: mm 50 - Ls/D ratio: 20,2 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection weight for PS: g 357 - Injection capacity: cm3/s 314 - Screw speed, max: rpm 320 - Nozzle clamping force: kN 29,4 Electrical parameters - Connection value: kW 38 - Heater power: kW 15,6 - Number of cylinder heating zones: - 5 - Dry cycle time according to Euromap 6: 1/h 2000 - Dry cycle time according to Euromap 6: s 1.8 Weight and dimensions - Net weight with control cabinet: t 6.5 - Machine dimensions (L x W x H): m 6.07 x 1.92 x 2.01

Year of construction: 2004, Condition: good (used), Laservall KUBO100 Tempering Unit (2004) Dkelqou Aqr Isxzh Tjl

Condition: excellent (used), Spare part to injection molding machine Krauss Maffei Panel Dkjlqxzouz U D Sjh Tjl

Year of construction: 2024, Condition: new, NEW , NEVER USED Demag Panel NC3 MAde in Germany width-30CM height-5CM Dksljuz Uq Eeqxzh Tsl length-50CM TYPE: 6EJ5 398-0DE14

Condition: good (used), Year of construction: 2003, Clamping force: 500 t Screw diameter: 90 mm Type: Horizontal Drive: Hydraulic Makes: Engel. Model: CL4550/500 . Age: 2003 Registered hours: 72000 Clamping system : Knee Lever system. Dksleuxdmksqxzh Tol Clamp Force : 500 tonnes. Screw diameter : 90 mm. Maximum injection volume : 2280 cubic centimeters. Plastification rate: 50 grams PS/Sec. Injection pressure : 1916 Bar. Mould height : minimum 250-850 mm. Opening stroke: 700 mm Daylight : maximum 1550 mm. Mounting Platen size 1210x1210 mm (Hor x Ver). Distance between coloms 840x840 mm Ejector stroke : 250 mm. Extras: Core pulling 3. -Robot : Engel ERC, thermounits, outfeed conveyor.