Used laser cutting machines 0-2999mm (x-travel) for sale (138)

Condition: used, LVD PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Fgodpfx Aszwgg Neanoi Model MFMC-12000 , Laser Power 12 KW.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser type: diode laser, laser source manufacturer: Rofin, laser power: 15 W, laser wavelength: 1,064 nm, workpiece weight (max.): 10 kg, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, overall weight: 95 kg, Equipment: CE marking, documentation/manual, emergency stop, fume extraction, We are offering this like-new ROFIN EasyMark E10 laser marking machine, manufactured in 2012. Manufacturer: ROFIN-BAASEL Lasertechnik GmbH & Co. KG Type: EasyMark E10 Material number/Serial number: 100101487/134 Equipment number: 50023376 Fsdpfx As Airameanjgi Laser medium: Nd:YAG Wavelength: 1064 nm Maximum laser power: 15 W Manufacturing month/year: 12/2012 Weight: 95 kg Protection class: IP 22 Fuse rating: 10 A Mains connection: 1P+N+PE Voltage: 100–240 V Frequency: 50/60 Hz Power consumption: 381 W Current consumption L1: 1.66 A Current consumption N: 1.66 A Marking area 120x12 mm with fast crossed-beam optics. The device is suitable for marking metals with annealing colors and for light engraving. It can also successfully mark non-transparent plastics. A suitable extraction system is included. A laptop is also included, which controls the laser via a LAN connection. Two programs are installed (one with a full graphical interface for creating layouts, and one that accesses these layouts and allows for higher automation). The marking process can be initiated on the laptop or with the included foot pedal. The system is fully functional and is only being sold because we are closing the entire operation.

Condition: used, Year of construction: 2013, Trumpf Fibre TruLaser 3030 Flat Bed Laser Cutter (3kw/Low Hours/Trumpf Service) (2013) Location: These lots are located in Fareham, Hampshire, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. Fgjdpfe Ah Hdujx Aanoi

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Fgjdjz It U Sspfx Aanoi Maintained by Bystronic. Fume extraction. Available with Nitrogen plant including Sauer Tornado Booster Compressor.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Fgodpfx Aas Ah Rl Ujnsi Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Technical Data – TRUMPF TruLaser 3030 * Manufacturer: TRUMPF * Model: TruLaser 3030 * Machine Type: CNC Laser Cutting Machine * Machining Process: 2D Laser Cutting * Working Area: 3,000 × 1,500 mm * Z-axis: 115 mm * Maximum Workpiece Weight: approx. 900 kg * CNC Control: Siemens Sinumerik 840D * Laser Technology: CO₂ laser (in standard TruLaser 3030 versions) * Laser Power: depending on the version, for example 3,200 or 4,000 Watts Cutting Performance Depending on the laser power and equipment, the following material thicknesses are possible: At 3,200 Watts: * Mild steel up to 20 mm * Stainless steel up to 12 mm * Aluminum up to 8 mm Fgjdpfx Aj Ah Uraoanei At 4,000 Watts: * Mild steel up to 20 mm * Stainless steel up to 15 mm * Aluminum up to 10 mm The stated values correspond to typical manufacturer data for the respective version. The exact laser power and cutting capacity of the machine offered still need to be confirmed. Equipment and Functions * CNC-controlled laser cutting * Precise machining of steel, stainless steel and aluminum * Suitable for single parts as well as series production * Automated cutting process * Machining of complex contours and shapes * Enclosed machine area * Automatic material change via the existing handling system Including TRUMPF LiftMaster The offer also includes a TRUMPF LiftMaster, manufactured in 2008, for the automatic loading and unloading of the laser cutting machine. The LiftMaster handles the material and enables the automatic feeding and removal of sheet metal. LiftMaster Data: * Manufacturer: TRUMPF * Model: LiftMaster * Year of Manufacture: 2008 * Machine Number: A0220A2542 * Material Number: 1246094 * Serial Number: 692 Thanks to the additional automation system, the machine is particularly suitable for companies that want to optimize their sheet metal processing. Condition and Inspection The machine is located in an industrial hall and is offered as a complete system. The optical condition can be seen in the attached pictures. An on-site inspection is possible after prior arrangement. Further technical information and pictures can be provided upon request. Dismantling, loading and transport will be arranged separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device Fodpfxezu Sqhe Aanogi SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this almost new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is stored in an adequately dust-free environment with the correct temperature and humidity. Machine data as of 01-10-2026: - Total machine operating time: 18 hours and 8 minutes - Total laser source operating time: 9 hours and 21 minutes - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Supply voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W New price: € 76,040 Fsdpsz Il Auefx Aanjgi If you have any questions or would like more information, please send a message or call. The pickup date will be determined in consultation. 2 industrial fans for air extraction can also be included.

Condition: excellent (used), functionality: fully functional, laser type: fiber laser, laser source manufacturer: Bistronic, laser power: 500 W, laser wavelength: 1,070 nm, table length: 12,001,200 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, overall weight: 3,080 kg, total length: 2,050 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, the machine is running well, the only reason that we sale out the machine is that the x and Y stroke are to short. Fjdpfx Ae Afzlajanjgi machine is under power.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Fedpfx Aaez Iwvgjnegi

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Fgjdpoymrn Eofx Aansi

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Fodj Aaxt Rspfx Aansgi Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2017, condition: excellent (used), Bystronic Bystar 3015 6kw cnc fiber laser Complete with Bystronic Bytrans ByTrans Extended Load/Unload system Year 2017 Power On hours - 30,000 (Kept switch on when not in use) Cutting hours -5,144 It is serviced annually by Bystronic as part of a service contract. Fgedpfxjlu E Hqo Aanei Recent works: 1 new module 1 new head Has automatic nozzle change and also has the camera to locate the sheets

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 29,658 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumeric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS 3000, laser power: 3,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 7 bar, cutting range flat at 90° (X-axis): 3,010 mm, cutting range flat at 90° (Y-axis): 1,510 mm, Equipment: Bluetooth, CE marking, USB port, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Prodej spolehlivého bezporuchového stroje ve velmi dobrém technickém stavu, vzhledem k nízkému počtu provozních hodin.( AMARON nemá se strojem nic společného). Stroj mohu za příplatek odborně nainstalovat a zprovoznit u nového majitele. Součástí dodávky stoje budou nové filtry do odsavače kouře a spotřební materiál ( keramiky, trysky, ochranná sklíčka). Fgjdjyx Iqzopfx Aanei

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: L49/A0221E0510, TRUMPF TruLaser 3030 fiber + TruLaser 5030 – with 2 PalletMaster systems and a STOPA sheet metal storage system (49 slots) Complete, automated laser cutting system – preferably sold as a complete package. For sale is a comprehensive TRUMPF laser cutting system consisting of two laser cutting machines, each with a PalletMaster and connection to an automated STOPA sheet metal storage system. The system is particularly suitable for automated sheet metal processing and efficient material flow. 1) TRUMPF TruLaser 3030 fiber (L49) – 4 kW – Year of manufacture 2016 For sale is a TRUMPF TruLaser 3030 fiber (L49) with 4 kW laser power and extensive special equipment. The machine is in good condition. Technical data: Fgjdpfx Ao Afpyfjanoi Manufacturer: TRUMPF Model: TruLaser 3030 fiber (L49) Year of manufacture: 2016 Condition: Good Laser power: 4,000 watts (4 kW) Laser source: TRUMPF TruDisk 4001 Cutting area: 3,000 × 1,500 mm Control system: Siemens SINUMERIK 840D SL Drive system: Linear and torque direct drives Operation: 17-inch touch color display Equipment: BrightLine fiber Automatic pallet changer Automatic nozzle changer PierceLine FocusLine NitroLine PlasmaLine FlyLine FastLine ContourLine AdjustLine ControlLine (automatic height control) Automatic nozzle cleaning Integrated camera Drop&Cut Electric roll-up roof Conveyor system Extraction and filter system Cooling system Automation and Software Automation interface for external loading and unloading systems TruTops Fab Integration TRUMPF TruTops Laser Network connection and USB interface 2) TRUMPF TruLaser 5030 (L52) – 6 kW CO₂ laser cutting system Technical data: Manufacturer: TRUMPF Model: TruLaser 5030 (L52) Year of manufacture: 2015 Laser: TruFlow 6000 CO₂ laser Laser power: 6,000 watts (6 kW) Working area: 3,000 × 1,500 mm Drive: Linear direct drives (gantry) Cutting head: Universal cutting head with 250 mm lens Control system: 17-inch touch color screen Automatic pallet changer Equipment and functions: BrightLine CoolLine PierceLine / FocusLine / NitroLine PlasmaLine / LensLine / ControlLine Smart Nozzle Automation (automatic nozzle changer) Smart Collision Prevention Automatic height control Cutting head lens with RFID chip Integrated cooling unit Longitudinal conveyor TruTops Laser software Other options available: Integrated camera systems Drop&Cut scrap material processing Automation interface PalletMaster connection TruTops Fab Integration 3. Automation – 2 × TRUMPF PalletMaster One PalletMaster per laser cutting machine 20 storage spaces each Modernization of PalletMaster and TKL by +profilsystems Connection to the STOPA storage system 4. STOPA sheet metal storage system Automated sheet metal storage system 49 storage spaces Connection to the laser cutting systems via the existing automation. Sale and Inspection The complete system, consisting of both TRUMPF laser cutting machines, the two PalletMaster systems and the STOPA storage system, is preferably sold as a whole. Individual sale is possible by agreement. Inspection by appointment. Price on request.

Condition: used, functionality: fully functional, Year of construction: 2007, CO2 laser resonators Fgedpfxj Ah Sp Eo Aansi 2 COMPLETELY IDENTICAL UNITS FROM THE SAME YEAR. 1 unit in excellent working condition. 1 unit in poor condition, recommended for parts. *BOTH UNITS ARE SOLD TOGETHER. Brand: Electronic Engineering Model: C3000 Year: 2007 Originated from a CO2 laser. Brand: RAINER Model: LaserOne 1530 C3000 Control: Siemens 840 DI

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Fgodpfxey Sgmno Aansi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 16,275 h, Control SINUMERIK 840D SL Laser source TruDisk 3001 Laser power 3,000 W (3 kW) X-axis travel 3,000 mm Y-axis travel 1,500 mm Z-axis travel 115 mm Max. axis speed X / Y / Z 100 / 100 / 100 m/min Max. simultaneous speed X-Y 245 m/min Max. sheet thickness – mild steel 20 mm Max. sheet thickness – stainless steel 15 mm Max. sheet thickness – aluminum 15 mm Max. sheet thickness – copper 4 mm Max. workpiece weight 900 kg Transport width 2,980 mm Machine weight 12,000 kg Connected electrical load 37 kVA Compressed air 6 bar Dimensions (L × W × H) 9,400 × 5,100 × 2 400 mm Accessories, Standard Equipment • Automatic pallet changer • Enclosed work area • Chiller unit (or Cooling unit) • Integrated electrical cabinet (or Control cabinet) • Conveyor belt • Work area lighting • Positioning laser diode • Spraying device • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning • Cutting head and adaptive lens system • 17-inch touchscreen • FastLine Fjdpfx Aae Af U Hqjnsgi • Teleservice • USB • CE marking • Light barriers (or Safety light curtains) • Monitoring system Optional Equipment • Automatic nozzle changer • Drop&Cut • Dot Matrix Code The machine is in good working order and can be seen under power after making an appointment.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 38,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: L69, laser hours: 26,400 h, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 4,000 mm, working width: 2,000 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale is a TRUMPF TruLaser 5040 Fiber L69, manufactured in 2014, equipped with a 5 kW TruDisk laser. The machine has a processing area of 4,000 × 2,000 mm and is currently powered on. An inspection with a functional demonstration is possible by arrangement. Technical specifications: Model: TruLaser 5040 Fiber L69 Year of manufacture: 2014 Laser source: TruDisk 5001, 5 kW Processing area: 4,000 × 2,000 mm Control system: Siemens Sinumerik 840D SL Equipment according to machine documentation: BrightLine Fiber and CoolLine Cutting packages for copper and brass ContourLine, FastLine, FlyLine, and AdjustLine Automatic nozzle cleaning Fgodpfxoz D U Nio Aansi Camera for process monitoring Electric retractable roof and multi-chamber extraction system Wireless Operation Point and teleservice The machine is particularly suitable for companies that want to combine a large sheet metal format with the material flexibility of a fiber laser. Price: €90,000 (negotiable), net, ex works Leopoldshöhe. Inspection and further technical documentation available upon request. Disassembly, loading, and transport are to be arranged by the buyer and are not included in the price. Please include your company name and telephone number in your inquiry.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, overall weight: 12,000 kg, Manufacturer: TRUMPF Type: TruLaser 5030 (L52) Year of manufacture: 2016 Working area: 3000x1500x115 Laser power: 6000 Watts Control system: Siemens Sinumerik 840 D Operating hours: 37010 / 21655 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 25 mm Max. sheet thickness/aluminum: 15 mm Max. speeds: 300 m/min Accuracy: +/- 0.1 mm Length: 11100 mm; Width: 4600 mm; Height: 2400 mm; Weight: 12000 kg Machine • Enclosed machine frame with integrated laser unit • Motion unit for highly precise machining • Enclosed beam guidance • Cooling unit • Automatic pallet changer • Single cutting head strategy • Longitudinal conveyor belt for small parts/scrap • Ergonomic control panel with touch color screen • Positioning laser diode • Work area lighting • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser • New generation CO2 laser TruFlow 6000, energy-efficient • Maintenance-free turbo radial fan • High-frequency excitation • Laser control system TASC • Laser power control • Laser logbook function Cutting head • Lens with RFID chip • Laser cutting head with 250 mm lens • Universal quick-change device (UTI) • ControlLine Control system • Simple workshop programming • Easy operation • Fast reproduction • Siemens Sinumerik 840 D SL • 19-inch touch color screen • Integrated technology data Fgode Ah Up Ujpfx Aanji • Automatic shut-off • Production plan • Programmable cutting gas pressure • Multi-sheet layout • Microweld • FastLine • AdjustLine • FlyLine • Remote support interface • Condition Guide Data transfer • USB interface • RJ-45 network connection • Central Link • Online Update Manager Extended machine equipment • Smart Nozzle Automation - Nozzle changer - Beam alignment - LensLine with automatic condition monitoring - Nozzle inspection - Smart Skip • Brightline • Integrated camera 1 for monitoring the work area and transferring single images to the network (view of the first 2.5 m) • Drop&Cut (only in conjunction with Integrated Camera 1)

Year of construction: 2012, condition: good (used), Used fully serviced, clean cutting Bystronic Bystar 3015 6kw 3metre x 1.5metre flat bed industrial cnc laser for sale Modern C02 Bystronic laser for sale High powered Bystronic Bystar 3015 Fgsdpfshu Rz Ujx Aanoi Power: 6kw / 6000 watt / Bylaser 6000 Cutting area: 3metre x 1500mm Year / new: 2012 Fully serviced with Bystronic United Kingdom Complete with Byload sheet loading arm Cutting heads: 5inch and 7.5inch As per photo a sample of 25mm thick mild steel cut on this powerful laser Ideal for cutting thick stainless steel, mild steel and aluminium

Year of construction: 2012, condition: excellent (used), Used Trumpf Tru Laser Cell 7040 5 axis / 3d cnc laser for sale Type L13 Fsdpfjitvihsx Aanegi Year 2012 4,000 mm (157 in) Y travel 1,500 mm, 2,000 mm (59 in) Z travel 750 mm, 1,000 mm (30 in) Cutting speed 100,000 mm/min, 173,000 mm/min (65.617 in/s) Laser power: 3.2kw / 3200 watt TruFlow 3200

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. Fsdpeyt Dchsfx Aanegi The resonator is in good used condition and operates flawlessly. Two identical units are available (price is per unit).

Condition: ready for operation (used), Year of construction: 1999, We are offering this used Amada LASMAC LC-1212 A3 laser cutting machine, manufactured in 1999. Fgjdpfx Aoz Rvg Doanji Manufacturer: Amada Model: LASMAC LC-1212 A3 Year of manufacture: 1999 Condition: ready for use If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC, laser type: CO₂ laser, laser power: 4,000 W, CNC laser cutting machine Amada LC 2415 alpha IV NT The machine is located in an operating facility and can be inspected while powered on. X working area max.: 2520 mm Y working area max.: 1530 mm Z working area max.: 300 mm Control system: Siemens Fanuc AMNC Laser power: 4000 watts Standard equipment: • Controlled axes: X, Y, Z (three axes are controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with repositioning) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatability: ±0.01 mm • Maximum workpiece weight: 330 kg • Height of the processing surface: 820 mm • Dimensions of the workpiece channel: 550 × 1,750 mm • Laser type: CO₂ laser with fast axial flow and high-frequency discharge excitation • Maximum cutting thickness: Fjdpfxezxtkkj Aanjgi • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm