Used coordinate measuring machines for sale (364)

Condition: excellent (used), functionality: unexamined, Equipment: documentation/manual, type plate available, For sale is a comprehensively equipped KEYENCE VL series optical 3D coordinate measuring system for non-contact, three-dimensional acquisition and precise measurement of components. The system offered consists of several original KEYENCE system components and is offered as a complete package including extensive accessories, a calibration board, software data carriers, and original documentation. Existing KEYENCE system components: KEYENCE VL-770 KEYENCE VL-750 KEYENCE VL-700 KEYENCE OP-88145 – VL Series Calibration Board including the corresponding transport case Further scope of delivery and accessories: Light/shielding hood Original KEYENCE calibration board with transport case Software data carrier for the KEYENCE VL-700 Series Application Connection and cabling Extensive original documentation and technical documentation Software and license documentation Documentation for additional KEYENCE software modules, including: VL-H3R – CAD Conversion Software VL-H3G – GD&T Measurement Software Further accessories as shown in the images Functional demonstration The KEYENCE measuring system was switched on, and the corresponding KEYENCE VL-700 series application was started for demonstration purposes. The corresponding photos show the switched-on system and the running software interface. Important note: The notebook visible in some of the pictures is used solely for demonstrating the KEYENCE software and the measuring system. The notebook is explicitly NOT part of the offer and is NOT included in the scope of delivery. No binding statement can be made regarding the current calibration status and a complete metrological inspection of the system. Condition Fsdpfx Aas Agnf Ajnepp The offered KEYENCE 3D coordinate measuring system is in used, overall visually good condition. Signs of wear and tear due to age and use may be present. The exact condition and the complete scope of delivery can be seen in the attached pictures. Inspection and collection Due to the size, weight, and sensitivity of the measuring system, collection is preferred.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor Fpsdpfjz Hw Elsx Aansp - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 Fodpjy R A Apefx Aanepp x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Fpsdpfxez Ditve Aanjp

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 145222060650, measuring range X-axis: 1,600 mm, measuring range Y-axis: 2,400 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 4,000 kg, total height: 3,610 mm, total width: 2,627 mm, total length: 3,160 mm, overall weight: 11,500 kg, input voltage: 240 V, table width: 2,500 mm, table height: 800 mm, table length: 3,160 mm, Equipment: documentation/manual, type plate available, Year of Manufacture: 2022 – Modern, state-of-the-art system in excellent working condition. Premium bridge-type coordinate measuring machine (CMM) from the world leader in industrial metrology. Maximum flexibility thanks to a modular sensor platform. Outstanding thermal stability, ensuring reliable results in real-world shop floor environments. Annual ZEISS Service & Calibration: Maintained and calibrated exclusively by original ZEISS service technicians every year. Full Traceability: Machine accuracy is fully documented and certified according to international standards. Fpedpfx Aj Afhnusanop Equipped with a ZEISS VAST scanning head.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156521, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Fedpfx Ajzwwkxjanepp Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. Fodpez Ebzbjfx Aanjpp According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. Fpodpfx Ajzwu Aleanjp # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 88229, total width: 1,450 mm, total length: 2,100 mm, overall weight: 3,800 kg, table width: 1,000 mm, table height: 850 mm, table length: 2,100 mm, Equipment: type plate available, Coordinate measuring machine: Zeiss MC 850, 08/12/06, UHING Year of manufacture: 08/1990 Serial number: 88229 Control system: C99 Dongle available: Yes Software: Calypso 7.6.4 Measuring head: VAST XT – Good condition – PC included – New software + license – Everything packed for transport with original Zeiss transport securing devices (value of transport securing devices approx. €5500) X-axis as a longitudinally movable portal, 850 mm Y-axis cross slide in the portal, 1,200 mm Z-axis as a measuring head quill (vertical), approx. 600 mm Through-passage between the portal, approx. 1,000/1080 mm Through-passage in height, approx. 750 mm Overall table size, approx. 1,000 x 2,100 mm Fsdpez T T T Tofx Aanopp Table height above the floor, approx. 850 mm Machine height, approx. 3,050 mm Weight, approx. 3,800 kg The machine was in use until recently. Free loading.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Fjdozwvk Rspfx Aanepp Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: excellent (used), Year of construction: 2020, operating hours: 450 h, functionality: fully functional, total height: 400 mm, total width: 800 mm, total length: 800 mm, travel distance X-axis: 5,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 5,000 mm, overall weight: 50 kg, repeat accuracy: 0.01 mm, Equipment: documentation/manual, KEYENCE WM-3000 Mobile 3D Coordinate Measuring System, Year of Manufacture 2020 For sale is a mobile 3D coordinate measuring system, KEYENCE WM-3000, year of manufacture 2020. The WM-3000 enables flexible and precise 3D measurement of components directly in production or at a testing station. Thanks to the optical tracking technology and the wireless measuring probe, the system is particularly suitable for dimensional accuracy checks and for comparing the actual and target dimensions of complex components. Technical data: Manufacturer: KEYENCE Type: WM-3000 Year of manufacture: 2020 Mobile 3D coordinate measuring system Measuring range: 5,000 mm Measuring accuracy: approx. ±28 µm Repeatability: up to approx. 10 µm Fjdpfsz Aynkox Aanepp Optical 3D measurement Wireless measuring probe Supply voltage: 220 V Weight: approx. 50 kg External dimensions: approx. 800 × 800 × 400 mm Suitable for: 3D dimensional inspection Quality control Actual vs. target comparisons Measurement of complex components Use directly in production The device is offered as used. Condition and scope of delivery, see photos or upon request. Subject to technical changes and errors.

Condition: like new (used), 3D Machines – Brown & Sharpe Standard Fpodpfx Aozndw Teansp

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel. Fjdsyybkwjpfx Aanjpp

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 Fpedpfx Aaoy U Urdenjp - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Fpjdpfx Aaozx Uwxonsp Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: good (used), Year of construction: 2022, Keyence VL-500 measuring head, VL-570 control unit, VL-500 device base, VL-550 optical 3D coordinate system scanner. Used, from a business liquidation. First purchased 03/2022. Technical data and information according to the manufacturer: 3D coordinate system control unit VL-500 Device base Keyence VL-550 3D measuring head Keyence 570 Measuring accuracy: ± 10µm according to VDI/VDE 2634 Part 3 Standard measuring mode: 4 million measuring points Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Repeatability: 0.002mm Measuring accuracy: +- 0.01mm Max. workpiece weight: 50kg 3D scanner / laser scanner Without Keyence computer with Windows 11 and extensive evaluation software (GD&T) Without dongle Without monitor, keyboard and mouse Without manuals We recommend an inspection to avoid misunderstandings. Information without guarantee Information, details and technical data from the manufacturer. To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Fjdpfxsz H Sa De Aanepp Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 Fodpsxyungsfx Aanepp IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2018, We are selling our Faro Quantum S measuring arm, including the Polyworks software package. Year of manufacture: 2018, last calibration: 2024. Comes with various accessories. Ready for immediate use. Fjdoz Rkncopfx Aanjpp

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with a camera, laser, and Renishaw probe system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible). Complete maintenance history available. Fpodpfxjxufk Uo Aanjp Factory-reconditioned premium multi-sensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery with factory service or via shipping company, worldwide. Optional online or on-site demonstrations with customer parts, and application-specific consulting by accredited Profitech measuring laboratories during the project planning phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance testing according to standards, certification, and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rental, rent-to-own, or financing options available directly through Profitech, without the need for a financial institution. The measuring device can be individually configured to meet customer requirements. Measuring range, all sensors: 400x400x200 mm Dimensions: 850x1000x2000 mm Weight: approx. 800 kg Maximum load weight: glass plate 30 kg Accuracy: U1 = 1.9 + L/200; U2 = 2.4 + L/150; U3 = 2.9 + L/100 (L = measuring length in mm) Maximum travel speed: 250 mm/s Includes camera Includes rotary table Includes laser Includes LED ring light Includes new frame grabber Includes 2-monitor operation Includes CNC control and PC Includes Hexagon Vision3D software

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Ready for immediate use Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Fpsdez N Akgjpfx Aanjp For further information, please feel free to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,750 kg, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,190 mm, total length: 3,477 mm, overall weight: 8,000 kg, input voltage: 230 V, table load: 2,750 kg, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | LH122010 Coordinate Measuring Machine Coordinate measuring machine with the latest Renishaw 5-axis technology, manufactured in 2017. Measuring range XYZ 1200 x 2000 x 1000 mm Dimensions: XYZ 2200 x 3350 x 3650 Max. workpiece weight: 2500 kg Measuring uncertainty MPE (E0) 2.2 + (L/350) in µm Equipment • Renishaw UCC S5 control, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor Fpjdpfoz Hxxaex Aanep • Active damping • Renishaw REVO 5-axis measuring system for single points and scanning incl. RSP2, 1x RSH175, 2 x RSH250 and RSP3-3 kit (3xSH) incl. all probe changers • Mode measuring software, current version with CAD import STEP incl. 1 year of software maintenance • PC system Windows 11 with 2 x 27 TFT monitors, NEW incl. height-adjustable desk • Control cabinet with the latest safety technology Original price in 2017 plus VAT: €234,890.00 Optional service package of your choice: Price: €19,880.00 Transport to loading bay | Commissioning | Inspection | Accuracy acceptance test according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, Optical 3D coordinate measuring machine, manufacturer Keyence Model series VL 550 / VL 570 with few operating hours. Fpodpfxor Epxpj Aansp - Basic device VL-550 - Measuring head VL-570 - Control unit VL-500 Some technical data on the measuring device: Display resolution: 0.1µm Repeatability: 2µm Measuring accuracy: ± 10µm in accordance with VDI/VDE 2634 Bl.3 Standard measuring mode: 4 million measuring points Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Scope of delivery: - 500mm base VL-550 - Measuring head VL-570 - Control unit VL-500 - cover - Calibration plate - User manuals - Certificates from the manufacturer - Shape and position tolerance module (software CD) - Comparison measurement module (software CD) - Alternating current cable Further technical data is available on request.

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: Fpjde Aa Nc Nspfx Aansp - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. We offer worldwide delivery on request!

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Fpsdpszz Rc Aofx Aanjp Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs Fsdpfx Aasxbpgtsnjpp • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables