Condition: used, Year of construction: 1999, Technical details: Iajdpfxjwdywqo Addel x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 15,2 t Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: ready for operation (used), Year of construction: 2012, operating hours: 45,656 h, functionality: fully functional, machine/vehicle number: AX4E -NAOS 12-160, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. spindle speed: 12,000 rpm Spindle drive power: 15 / 11 kW Max. torque: 102 Nm Tool holder: SK 40 Distance spindle center to table: 80 - 800 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 x 500 mm Max. workpiece weight: 500 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 s Indexing time: 1.49 s Number of tool stations: 60 Max. tool diameter: 70 mm Max. tool diameter with adjacent stations free: 170 mm Max. tool length: 550 mm Tool-to-tool change time: 0.9 s Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Creep feed range: 0 - 5,000 mm/min Isdpfxox I Amis Addjal MACHINE DETAILS Total power requirement: 34 kVA Dimensions & Weight Footprint: approx. 5500 x 3000 x 2800 mm Machine weight: approx. 11.1 t Operating hours: 45,656 h EQUIPMENT Chip conveyor Coolant system Internal coolant supply IF Knoll Tool changer B-axis Pallet changer Oil mist separator Magazine tool breakage control Thread milling Note: Proof of spindle replacement in 2019 is attached.

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 600 mm z-travel 500 mm weight of the machine ca. 18500 t dimensions of the machine ca. 5400x3800x3300 mm Total power rating: approx. 133 kVA Backup fuse: 250A Compressed air quality Iajdpfx Asyabgkeddel according to ISO 85731: purity class 4 Connection pressure: max. 9.5 bar Operating pressure: min. 7 bar Number of spindles: 2 Spindle arrangement: vertical, side by side Spindle distance: 600 mm Spindle with max. 12,000 rpm Spindle bearing diameter: 90 mm Start-up time: 0-10,000 min-1 approx. 0.8 s Travel distance X-axis: 600 mm Travel distance Y-axis (alternating position): 600 (875) mm Travel distance Z1, Z2 axis: 500 mm Tool change system: Pick up Tool spindle: HSK 80 Tool positions: 70 Max. tool diameter: 90 mm Max. tool length: 540 mm Max. tool weight: 10 kg Max. magazine load: 350 kg

Condition: used, Year of construction: 2007, x-travel 4000 mm y-travel 3000 mm z-travel 2200 mm control Siemens Sinumerik 840 D quill stroke 800 mm max. workpiece weight 20000 kg tool taper ISO 50 BIG PLUS DIN 69871 max. torque at the spindle 2346 Nm spindle diameter 160 mm total power requirement 65 kW weight of the machine ca. 50000 t dimensions of the machine ca. 12,8 x 11,8 x 5,7 m Work table - Clamping surface 2500 x 2000 mm - Table height above floor 800 mm Feed speed - x-axis 0.5 to 10000 mm/min - y-axis 0.5 to 10000 mm/min - Z-axis 0.5 to 10,000 mm/min - Rapid traverse (X/Y/Z) 25 / 25 / 25 m/min - Max. feed force (X/Y/Z) 28,000 / 27,000 / 28,000 N Spindle speeds in 1/min - Gear stage 1: 6 to 848 rpm - Gear stage 2: 850 to 3000 rpm Tool magazine: - 306 slots divided as follows: Number of slots max. length 700 mm: 54 Number of slots max. length 450 mm: 54 Number of slots max. length 300 mm: 63 Number of slots max. length 200 mm: 135 - Tool weight max. 35 kg - Tool diameter with free auxiliary slots max. 325 mm - Tool diameter without free secondary spaces max. 105 mm Accessories - Approx. 30 nos. SK 50 tool holders Isdpew Sfkksfx Addjal - 1 measuring probe - Coolant system/paper belt filter & chip conveyor - Cooler - Oil mist extraction - Fixators - Documentation

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Year of manufacture: 2026 Condition: new Iedpsxdwndjfx Addeal

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Ijdpfx Adjx D Nf Ujdjal Milling

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg Iaedpexrwpdsfx Addol

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Iajdpfsx Sq Uvox Addjl Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Iajdpfx Asx Exvzsddsl Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control: CNC path control with color screen SEIKOS 16 M TECHNICAL DATA Working area: X-axis (table cross travel) 680 mm Y-axis (spindle head vertical travel) 680 mm Z-axis (column longitudinal travel) 680 mm Pallet clamping surface 500 x 500 mm Drive power (50% DC/continuous) 25/22 kW Speed range (2 stages) 60 – 12,000 rpm Tool holder DIN 69871 A 40 Isdew Ud U Topfx Addjal Tool changer (chain magazine) Number of magazine stations 60 Max. tool diameter 95/160 mm Chip-to-chip time 3.8 sec EQUIPMENT/ACCESSORIES  Complete enclosure with sliding door, electrically interlocked incl. work area lighting  Double pallet changer  Automatic tool changer ATC 60  Chip conveyor  Coolant system with 3 pumps, 100 l tank  Coolant feed through spindle nose approx. 25/40 bar  Work area washdown system  Broken drill monitoring (controllable via G-code command)  Tool measurement (controllable via G-code command)  Electronic handwheel  2 additional pallets  Table with 1° indexing  Spindle can be electronically positioned  Setup elements  Documentation

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor Ijdpfx Asx S Etmsddeal - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: SIEMENS, controller model: Sinumerik, total height: 2,800 mm, overall weight: 20,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 28,000 W, tool weight: 6,000 g, This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Required installation space (length x width): approx. 5950 mm x 6700 mm • Weight (kg) including coolant system and chip conveyor: approx. 25000 kg • Operating voltage: 400 v 3 n~ 50 hz • Control/valve voltage: 24 v dc Iaodpfxex Nr Ilo Addol • Machine power rating: approx. 82 kva • Back-up fuse before main switch: 3 x 160 a • Connector cross-section: 70 mm² Extra Information Ott Tool Clamping System Torque (S1/S6): 63/83 Nm Nominal Speed: 4200 rpm Spindle Bearing Diameter: 70 mm Spindle Lubrication: Lifetime grease lubrication 1 Horizontal 180° swivel support (W-axis) Faceplate Diameter (NC drive/counter bearing): 500/345 mm Permissible Tangential Torque: 15000 Nm Positioning Accuracy: ±3 angular seconds Swivel Time (0°/180°): Approx. 6 s Number of Horizontal 360° Workpiece Support Axes Positioning via Face Gearing: 120 x 3° Positioning Accuracy (120 x 3°): ±3 arc seconds Max. Transport Load per A-axis: Approx. 600 kg Permissible Tangential Torque: 5000 Nm Working Area (interference circle x length): Ø700 x 940 (1036) mm Approaching Intermediate Positions Outside the 3° Pitch: Possible (NC position control) Positioning Accuracy: ±25 angular seconds Permissible Tangential Torque: 1000 Nm Tool Magazine: 90 tool positions (3 x 30) Max. Tool Diameter with Free Adjacent Positions: 160 mm Cut-to-Cut Time (within 1 cartridge): Approx. 5.2 s Media Hydraulic Unit Capacity: 160 l Max. Operating Pressure: 160 bar Max. Flow Rate: 12 l/min Pneumatic System: Required Compressed Air Connection, Required Air Consumption (short-term) 6 ± 0.5 bar Factory Air Quality: Class 545 according to DIN-ISO 8573-1 Coolant System: Knoll coolant system with coolant cooling Coolant Tank Capacity: Max. 1400 l Separate Machine Bed Flushing: 160 l/min at 2.6 bar External Tool Cooling and Various Flushing Functions: 120 l/min at 3.5 bar Internal Tool Cooling Through the Spindles: 40 l/min at 60 bar Dimensions Machine Depth 5450 mm

Condition: used, Year of construction: 2002, Technical details: Iaodpfx Ajw T Tntsddol x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 770 mm z-travel 805 mm Control Heidenhain iTNC 530 spindle tunring speed 16.000 U/min spindle drive 25/32 kW Isdpfjx Ik Tqjx Addjal torque 159/206 Nm tool taper HSK-A 63 number of tool places 40 Pos. size of pallet 400 x 400 mm numbers of pallets 2 auto power on hours ca. 38.013 spindle hours ca. 17.871 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Interchangeable inserts - Chip conveyor - Internal coolant system - Tool cleaning system - Tool length measuring device - Laser measuring system for tool monitoring, Blum - Compressed air supply through the spindle center - Cleaning gun - Blow gun - Electronic handwheel, Heidenhain HR 520 - Decentralized work area extraction, 800 m³/h Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Iaodpjxlcivsfx Addol

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Iaodpfex At Svox Addol Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Year of construction: 2003, condition: excellent (used), Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Nos. pallets 5 Iaedpfxspwbfkj Addsl SK40 IKZ 25-50 bar Measuring probe Tool breakage monitoring KSS cooling New spindle in 7/2022. Spindle hours 4800 h April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, subject to error.

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Iodpfx Adeqc Umgjdeal Control: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Video available!

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm Iedpfx Aowdywdsddjal pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: used, Year of construction: 2011, x-travel 600 mm y-travel 560 mm z-travel 565 mm Control Fanuc Series 32-i MODEL A spindle tunring speed 8.000 U/min tool taper BT 40 spindle hours ca. 11.298 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Commissioning: 2016 Technical Features & Accessories: - Interchangeable plates/table Accessories, tools, and clamping devices shown are only included if noted in the additional information. Subject to changes and errors in technical data and specifications, as well Iodpfsx Ik S Hex Addjal as prior sale!

Condition: good (used), Year of construction: 2008, operating hours: 9,267 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of spindles: 60, tool length: 550 mm, tool diameter: 250 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Iaodpfx Aotvf Smsddel

Condition: ready for operation (used), Year of construction: 2011, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, table width: 500 mm, table length: 500 mm, rotational speed (max.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hüller Hille nb-h95 Year of manufacture: 2011 Siemens 840D SK40 Tool magazine for 100 tools Chip conveyor Band filter Through-spindle coolant (IKZ) Iajdpfswfdq Dox Addel The machine was originally delivered as a double-pallet changer and later retrofitted with a Kirchgässner 8-fold pallet storage system. The machine runs flawlessly and can be inspected under power with chip cutting. Currently, the pallet changer has an electrical issue (feed card), which is why the price is so low. Repair costs are approximately €3,000. The machine is immediately available.

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Balluf read/write Renishaw MP10 30 Bar coolant Mayfran Consept 2000 This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Iaodpfxsx D Nlze Addol Application Types Milling

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Isdpfx Ajw Ng D Hoddsal Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Ijdpfxsku A A He Addjal Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.