Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm Ijdpfx Adjxyabxeiea z-travel 510 mm control Fanuc MSC 501 (Fanuc 16i) spindle speeds 10000 U/min spindle drive 22 kW rapid travel x/y/z 32 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm table load 0,5 t table index 1 ° total power requirement 56 kVA weight of the machine ca. 8,7 t dimensions of the machine ca. 2,9x4,1x3 m Control Fanuc MSD 501, 40 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED Iodpfjlrqiqjx Adioa X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 4 Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm This 4-axis Okuma MA-40HA horizontal machining centre was manufactured in 2001. It features a robust OSP 100U control system and a generous automatic tool changer with 60 magazine slots (ISO40). Ideal for complex machining tasks with its 560 mm travel in X, Y, and Z axes. Contact us for more information about this machine. Ijdpfx Adsxzvtgjija Application Types Milling

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Iedpfx Adexylqxeisa Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2002, Technical details: x-travel: 560 mm Iedpfsxz D Raox Adioa y-travel: 510 mm z-travel: 510 mm control: Fanuc MSX 501 MAPPS III spindle drive: 22 kW spindle speeds: 12000 U/min rapid travel x/y/z: 42 mm/min Number of tool station: 40 BT40 max. tool weight: 12 kg tool changing time: 1,3 sec Pallet dimension: 2x 400x400 mm table load: 0,5 t working diameter: max. 610 mm total power requirement: 56 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9x4,1 m Accerories Chip conveyor Coolant through spindle 70 bar with filter Table probe for tool breakage and length measuring Tactile sensor for workpiece measuring Air Filter

Condition: excellent (used), Year of construction: 2005, TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Ijdsxywtlspfx Adija Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Control Powered Hours: 112,997 h

Condition: used, OKK HM 40 , 400mm HMC, (8) Pallets, serial number 378 MA74294, 16 i M Fanuc Control, BT 40 Spindle, 20,000 RPM, 120 ATC, B axis, Through Spindle Coolant, Coolant & Chiller, NEW 2001. Isdpjxpxp Hofx Adija

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Iedpju A Ut Nefx Adija Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand SIEMENS Model 840D sl Main Drive Spindle speed range 9000 Stroke 200 mm Number of axis 3 Iodpfx Asw Tnn Usdioa This 3-axis HELLER PT 16 was manufactured in 2016. It features a multifunction spindle driven by a compact servo motor, achieving speeds up to 15 m/min and a maximum of 9,000 rpm. The machine offers a 200mm stroke in 3 axes with ball rail guides and screws for enhanced precision. Consider the opportunity to buy this HELLER PT 16 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Condition: repair required (used), Year of construction: 2009, functionality: not functional, travel distance X-axis: 7,400 mm, travel distance Y-axis: 1,460 mm, travel distance Z-axis: 620 mm, 7.4 Mtr 4-Axis machining centre for sale as spares or repair. X-Axis travel 7400mm, Y-Axis travel 1460mm, Z-Axis travel 620mm, A-Axis +/- 90 deg, Electrospindle power 5.5kw. Isdpfow Nwrusx Adija Pros: New spindle in head in last 5 years, new clipper unit in last 5 years, many new cables in last 12 months. Cons: Head doesn't move and we've been told it could be the motor but this isn't 100% guaranteed. This will be sold as seen with no guarantee. Any inspection is welcome. The perimeter soundproof cabinet IS NOT included in the sale. The buyer will be responsible for the removal and transportation from our premises. Please note: Price advertised is + VAT.

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm Iedpfx Adswdywdsisa y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of construction: 2005 TECHNICAL DATA: Travels: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse: (X/Y/Z): 50 m/min. Speed range: 10,000 1/min. Drive power: 30 / 25 kW Iodjv Nhyljpfx Adija Tool holder: BT 50 Tool changer Tool places: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (LxWxH): 9.200 x 4.900 x 3.920 m Equipment features: Internal cooling (IKZ): bar Chip conveyor High pressure pumps

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Iedpfxsxy S Auj Adisa Tool magazine with 80 stations

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Ijdpfx Asu A Td Tedioa Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand SIEMENS Iodpfx Asxy Ti Aodija Model 840D Powerline Main Drive Number of axis 4 Tools Type of tool holder HSK63 Additional Equipment Pallet changer: RS4 Tool magazine: Omron This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Iodeq Ui Hqepfx Adioa Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, Technical details: x-travel: 800 mm y-travel: 840 mm z-travel: 865 mm control: Siemens 840 D spindle speeds:: 10.000 rpm Iedpfxoxxl R Ne Adioa spindle drive motor: 20 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 4 x 3 m 4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine *

Condition: excellent (used), Year of construction: 2000, Mazatrol Fusion 640M control system Travel X/Y/Z 710/610/660 mm Spindle speed 12,000 min-1 Tool magazine for 80 tools SK40 Iedpfouvg Nuox Adisa 2-fold pallet changer (500x500 mm) Max. Workpiece D 730 mm, H 710 mm, 500 kg Chip conveyor

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Iedpfx Aou Dahnodiea High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,000 h, Control Unit Brand SIEMENS Model 840D Isdpfsxy Tipox Adiea Tools Type of tool holder SK 40 DIN 69 871 Additional Equipment Operating voltage: 400 V, 50 Hz This HELLER H2000 was manufactured in 2017. It features a robust SIEMENS 840D solution line control system and a tool magazine with 80 positions. The machine includes a NC rotary table and a coolant purification system with a 50 bar internal supply. Ideal for precision machining with its advanced spindle technology and 3,000 operating hours. Consider the opportunity to buy this HELLER H2000 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Ijdpowrt Rmjfx Adiea Paper filter Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 6000 mm Measurements depth 5500 mm Measurements height 3000 mm Machine weight 22000 kg Main Drive Number of spindles 2 Spindle speed range 4200–16000 Movement X-Axis Movement 450 mm X-Axis Feed Force 8000 N X-Axis Rapid Traverse 60000 mm/min Y-Axis Feed Force 8000 N Y-Axis Rapid Traverse 60000 mm/min Z-Axis Movement 450 mm Isdpfoxyl Tajx Adija Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 60000 mm/min Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 320 mm This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1998, Fanuc System 16 MC control Travel paths X/Y/Z 800/750/770 mm Spindle speed 20,000 rpm Tool magazine for 132 tools HSK A-63 Dual pallet changer 630x630 mm Iodpfx Ajwwkh Tjdija Knoll system with internal coolant supply Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 6000 mm Measurements depth 5500 mm Measurements height 3000 mm Iodpfx Aexyl S Nodisa Machine weight 22000 kg Main Drive Number of spindles 2 Spindle speed range 4200–16000 Movement X-Axis Movement 450 mm X-Axis Feed Force 8000 N X-Axis Rapid Traverse 60000 mm/min Y-Axis Feed Force 8000 N Y-Axis Rapid Traverse 60000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 60000 mm/min Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 320 mm This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. Application Types Milling

Year of construction: 1997, condition: good (used), Control uni-Pro CNC 90 Ijdpelkgfaofx Adioa Travel X/Y/Z 800/800/710 mm Spindle speed 4500 rpm Tool magazine for 52+120 tools SK 50 Indexing table 1° 4-fold pallet changer 500x630 mm chip conveyor