Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Cobeklv H Ijvacucogt Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Csbsk Scxmovacucogt Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Cobvacueun Izcocjgt Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: Shaker 4x LDS V721 air-cooled Amplifier : PA 1000L Controller : imv K2 MIMO (Multi Input Multi Output) Software : imv K2 Excitation modes : Sine / Noise / Shock / Real-time profiles Force vector per shaker : 2.9 kN (peak sine) / 1.9 kN (RMS noise) / 4.6 kN (peak shock) Max. load : 100 kg per shaker Acceleration : max. 44 g RMS / 66 g peak Velocity : max. 0.7 m/s Displacement amplitude : max. 25.4 mm p-p (1 inch) Frequency range : 5...4000 Hz Clamping surface for test specimens : 1000 x 1000 mm aluminum profile frame Special features : The four shakers can be operated synchronously or asynchronously with the MIMO controller. With an aluminum profile frame, a clamping area of 1x1 m² can be achieved for large test specimens. Without the profile frame, mobile use as a modal shaker for large test specimens such as complete vehicles is possible. The lightweight oscillating elements of the shakers enable excitation frequencies of up to 4000 Hz. Weight: 2000 kg Climatic chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / monoblock, welded Dimensions:(mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8m³) External dimensions without base frame: 2,340 3,600 2,800 External dimensions with base frame: 2,340 3,600 3,800 External dimensions of power unit: 1,200 2,400 2,200 Door: 2,000 2,000 2 test room windows in the door: 460 460 Weight: 4,500 kg Insulation 140 mm PU, CFC-free, B1 to DIN 4102 External cladding: sheet steel 0.6 mm, painted to RAK 7035 Cjbour Hrbevacucsgt Temperature range: -55 °C to +140 °C Temperature stability: ± 0.5 K temporal Climatic range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of delivery: (see picture) Example pictures! Actual pictures will follow! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Cgebvacouuaryoucst Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), TIRA Type: Walk-in climate simulation cell TTZ 4008 S(m) Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 8m³ External dimensions (WxDxH) approx. 2410mm X 3920mm X 2530mm Test chamber (WxDxH) approx. 2002mm Χ 2148mm Χ 2005mm Door opening (WxH) approx. 2002mm X 2005mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgebvajuvil Sscucst

Condition: good (used), RS Simulators Type: Walk-in climate simulation cell KKC 22/45 Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 22m³ External dimensions (WxDxH) approx. 2600mm X 6400mm X 2800mm Test chamber (WxDxH) approx. 2200mm Χ 4700mm Χ 2300mm Door opening (WxH) approx. 2200mm X 2300mm Cjbveuviydeacucjgt Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), RS Simulators Type: Walk-in climate simulation cell KKC 22/45L Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Cjbvaceuvi Nfeucsgt Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 22m³ External dimensions (WxDxH) approx. 2600mm X 6400mm X 2800mm Test chamber (WxDxH) approx. 2200mm Χ 4700mm Χ 2300mm Door opening (WxH) approx. 2200mm X 2300mm Year of construction: 2009 Technical data Sun simulation: Control insert: Mitronic STB1-8 Number of lights: 8 Ballast: Mitronic CP2k5 - 2ZS Ignitor: Hönle Light source: OSRAM Powerstar HQI 2000W W/D/S Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, LDS Type: V875 Shaker System V875-440 with amplifier SPA40K Shaker for medium forces Technical data: Headexpander 850 * 850 mm Armature dimensions: 440 mm Sinusoidal force vector 35.6 kN (peak) Sine force vector 35.6 kN (effective) Cgjbvacujuxcpwscot Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Condition: gebraucht / used Weight: Shaker approx. 2200 kg Blower: 181 kg Amplifier: 622 kg Scope of delivery: (See pictures) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), White Type: WK-1000/70/5 Weiss climatic test chamber with Weiss air-cooled condenser S!MCON / 32 control unit Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm, External dimensions: Height 1980 mm, width 1385 mm, depth 1850 mm, Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal power 26 KW Rated current: 38 A Data for temperature tests: Temperature range: -70 to +180 °C Temperature deviation in time in the center of the working space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Csbeu Ap Tkevacucegt Temperature change rate Heating: 6.5 K/min Cooling: 6.0 K/min Heat compensation max. 5000 W Data for climate tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the middle of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % r.h. Dimensions incl. feet Width x depth x height: 1190 x 1120 x 1093 mm Refrigerant: R404 A 11.0 kg Refrigerant: R23 A 1.5 kg Weight: approx. 910 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Feutron Type: 3416/17 Temperature test chamber Air-cooled Test chamber nominal volume: 280 liters Dimensions: Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door dismantled: width 1540 mm x height 1940 mm x depth 925 mm Test chamber: width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x height 2090 mm x depth 2165 mm Through-hole 2 pieces side wall, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW  Weight: 635 kg Refrigerant: R507 / R23 Cobvaeu E N Tiocucsgt Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1996, Condition: good (used), Here we offer a Voetsch drying oven Waermeschrank Waermeofen. Voetsch NTU 60/60 250°C Nominal temperature: 250°C Supply voltage: 400 V 3 (N) PE AC, 50/60 Hz Interior dimensions: width 600 mm/height 600 mm/depth 600 mm External dimensions: width 1000 mm/height 1675 mm/depth 1300 mm Cobvacebqh I Seucjgt Air circulation blower Type: Voetsch NTU 60/60 Scope of delivery: (see picture) (Changes and errors in the technical data are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or Cgebocnic Devacucet RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Cgjbjgkafiovacucot Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: Cobvjm Tvzcoacucogt left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temperature deviation in time in the center of the chamber ± 0.1 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Csbvjp Dun Aeacucjgt Heat compensation max. 2750 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27,0 kW Rated current 42,02 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 960 kg Type: WT11-1000/70/5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Vötsch temperature test chamber. Air-cooled Test chamber: Cgebvacoqa Dcpsucot The test chamber is made of highly polished stainless steel material no. 1.4301. The test specimens can be placed on the supplied shelf or on the test chamber floor. Test chamber door: The test chamber door locks the test chamber with a lockable latch. Touch panel: All control and operating commands can be triggered on the "touch panel" operating unit by simply touching the function icons. Feed-throughs: The test chamber is equipped with feed-throughs on the right and left side. Measurement cables and test equipment can be routed into the test chamber through these. Feed-throughs 130∅ Feed-throughs 60 ∅ Test chamber capacity 190 liters Characteristic values for temperature tests: Temperature range - 40°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 Spatial ± 0.5 to ± 2.0 Temperature change rate Heating 4 K/min Cooling 3 K/min Heat compensation max.1000 Watt Test chamber dimensions: Width 580 mm ,Depth 450 mm ,Height 750 mm External dimensions: Width 870 mm ,Depth 1280 mm ,Height 1575 mm Electrical connection: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Connection cable: 3.5 m Fuse protection: 16A slow-blow, on site Refrigerant: R-404A Test chamber capacity: approx. 190 liters Weight: approx. 420 kg Type: VT 4018 The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Csbvoqxavaeacucjgt Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm (refrigerant converted to R-452A) Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Csbsrak Rmjvacucjgt (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs Cgobvacorak S Dsucjt The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Carl Zeiss Type: DuraMax RT 5/5/5 The original price was €165,000 Transsport fuse not included in the auction and must be returned after delivery. Measuring range: x = 500 mm Y = 500 mm z = 500 mm Length measurement deviation according to ISO 10360-2: MPE_E=2.4 + L/300 µm, permissible temperature range 18-22°C MPE_E=2.7+L/250 µm, permissible temperature range 18-26°C MPE.E=2.9+L/200 µm, permissible temperature range 18-30°C (L= measuring length in mm) Device features, equipment Portal measuring device with fixed device table Integrated vibration damping Table height approx. 910 mm Glass ceramic scales External machine control MCC 800 with protection class IΡ54 Tactile scanning measuring head VAST XXT TL3 Control panel shelf Reference stylus Software license basic package Acceptance documents, operating instructions Csbvacouli Ixeucegt Device documentation on CD System integration Table top for MCC 800 Basic equipment: Numerical control panel Standard with two progressive joysticks, LCD display and function keys Ergonomic ShopFloor base frame With lockable computer cabinet and fan included Cable set underframe Shop Floor for peripheral connection to the PC. Protection class ΙΡ54 in the base frame. Operating unit with monitor attachment and keyboard shelf. Automatic temperature recording unit With 2 workpiece sensors (magnetic) Rotary table for DuraMax Precision rotary table protection class ΙΡ53 incl. clamping device RT axis calibration standard and accessories Centric load capacity 9 kg Sensor system Passive scanning sensor system VAST XXT TL3 Consisting of: 1 passive scanning sensor head VAST XXT TL3 ID 1 reference stylus TL3 ID coded 1 reference stylus Calibration sphere RSH-Compact Consisting of: Basic case RSH-Compact Calibration sphere RS-DK25-C:DK=25 mm made of ceramic with shaft Μ6 Mounting kit for table tops with Μ12 thread Overall height approx. 214 mm Tools Accessories Probe system VAST-XXT CNC probe changer Probe holder VAST XXT with 3 storage locations Probe kit Kit 3 for VAST XXT Basic assortment star Device accessories kit for VAST XXT TL3 41-parts & calibration ball DK=8mm Probe plate VAST XXT TL3 ID Probe length 30-150 mm Data system: HP Workstation 64 Bit consisting of: Intel Xeon Ε5 16 GB main memory (RAM) 256GB Solid State Drive (SSD) 2ΤΒ Hard disk (HDD) 1 GB graphics card DVD+/-RW drive Network card (connection to the control unit) Network card (connection to the customer network) USB optical mouse Operating system Windows 7, 64bit LCD screen 24 inch Software: Basis Calypso CNC Geometry: Fully graphical measurement and evaluation software with CAD core for all prismatic measurements. Easy to use thanks to test plan-oriented procedure Strong graphical support with visualization of the measurement measuring task and the input values Few keystrokes and low susceptibility to errors thanks to automatic element recognition and automatic path generation Measurement time optimization through variable test scope Variable design of the results presentation with simple integration of workpiece-specific graphics Multimedia support for the documentation of part clamping and probe arrangement for the CNC start. Calypso CNC curve measuring program: For measuring and digitizing 2D and 3D curves with VDA interface Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Werth Type: Werth SCOPE- CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z) : 400 x 200 x 200 [mm] Work table with integrated electrical cabinet : 1600 x 950 x 780 [mm] Max. Weight on table : 20 [kg] Operating conditions, * relative humidity, 40 - 70 [%] * Temperature; 10 - 40 [°C] Cgjbvacueu Iub Recjt Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental dimensions Ball screw drive with servo motor Optical magnification (video) : 0.5X to 5X Optical field (video) : 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball Combinable illumination : diascopic, episcopic ring LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting Control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table by joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data, specifications are reserved!) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent data logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components and and systems for autonomous driving. These complex, networked technologies provide ever larger amounts of data, which makes and more complex during the development phase. In order to shorten the test drives, reduce their number and still meet the test requirements of all departments, the advantages of an intelligent and powerful data logger data logger such as the GL5300 series come into play. The GL5300 series covers the time-synchronous recording of LIN/ CAN & CAN FD bus systems via FlexRay networks through to Ether- networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 for a further 20 CAN FD channels with SIC transceiver and up to 3 GL5450 for synchronous recording of up to 60 100-base T1 (30 taps) and up to 18 1000-base T1 routes (9 taps). Residual bus simulation Classifier Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FLexray, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive triger and filter conditions) Data transmission via LAN/WLAN, USB and mobile radio Operation via menu control Technical data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 Bit 4 Operating voltage +7 V ... +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in half-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C... +70 °C Housing: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Trim strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgobvacst R R Uweucot

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. Cgjbsm Tvyxovacucjt 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2016, Condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Cgjbvacogkglxoucst Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.