Condition: excellent (used), Primus Engineering Type: DST 2000 This test device was designed to carry out IP protection class tests "dust" according to e.g. DIN 40050 Part 9 and DIN EN 60529. Fpsb E Ajvptykoz Rgeg The test device is intended for testing technical components under the influence of dust within the limits specified in the technical data. It was developed for this purpose and must not be used for other purposes. The test device may only be operated with non-flammable and non-explosive dust! Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Technical data: Total electrical power: Max. 2 KW Connection voltage: 400 V / 50 Hz 3-N/PE (16 A EEC socket) Exhaust air connection: DN100 (flange) Dimensions: Width approx. 1,300 mm Depth approx. 1,000 mm Height approx. 2,000 mm Dimensions of test chamber: Width approx. 1,000 mm Depth approx. 1,000 mm Height approx. 1,000 mm Volume approx. 1,000 liters Mass: approx. 350 kg Dust test: Dust-protected IP5X Dust-tight IP6X with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2021, Condition: like new (used), Functionality: limited functionality, machine/vehicle number: 8001857, 2 special machines (measuring device) for dismantling the components Fpjb Ejv Tywko Az Rgjg

Condition: excellent (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Fpsb E Ajg Sxmfoz Rgeg Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 1992, Measuring range X-axis 2400 mm Fpobeg Er Nlo E Az Rgjg Measuring range Y-axis 1200 mm Measuring range Z-axis 1500 mm Machine weight approx. 9,00 t

Condition: used, Year of construction: 1995, Functionality: not functional, Mechanically functional but requires a new operating system hence price. Fpeb Eeu Up A Te Az Rgeg

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, !!!! Another attractive offer at the end of the year: ZEISS DuraMax !!! The measuring device is still available in 2024: Viewing possible at short notice by appointment. Measuring machine: ZEISS DuraMax 5/5/5 Year of manufacture: 2013 Software: new, Calypso, basis latest version Computer: new, Windows 11 operating system Fpsb Ejvgbp Ue Az Rgsg Available: by arrangement, immediately Measuring range: 500 * 500 * 500 mm Accuracy: 2.7 + (L / 200 mm) Touch probe: VAST xxt

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Feb E Azert U Nus Rgjpg Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 7525-4237-FA, arm reach: 2,500 mm, TECHNICAL DETAILS Single-point repeatability: 0.020 mm Volumetric accuracy: ± 0.029 mm Range: 2.5 m Software Software: Polyworks Metrology Suite 2019 IR8 Version: 64-bit Jan 2020 Computer Model: DELL Precision 7740 Processor: INTEL Core i7 Memory: 16 GB RAM Fob E Azov I Uxxj Rgopg Hard Drive: 500 GB HDD Operating System: Windows 10 Pro 64-bit MACHINE DETAILS Arm weight: 8.0 kg Operating temperature: 0 °C – 50 °C Storage temperature: -30 °C – 70 °C Relative humidity: 10% – 90% (non-condensing) Operating altitude: 0 – 2,000 m EQUIPMENT - Probe 15 mm - 6 mm probe - 3 mm probe - Magnetic base - Calibration bar - Calibration sphere - Carrying case

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 Fpeb E Azjihills Rgeg JFA unwinding trestles Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2002, - Machine foundation and bridge made of granite Fjb E Az Rev I U Erogspg - Includes 3D CAD-capable PC Demis software - Includes TP200 touch probe system - All axes with air bearings - Ball screw drive - Haidenhain glass scales - Large measuring range - 2 independent spindles - Machine serviced and tested - Year of manufacture 2002 Specifications - Measuring range: 600 x 600 x 300 mm - Working air pressure: 6.5 bar - Air consumption: 80 Nl/min at 5 bar - Dimensions W x H x D: approx. 1550 x 2300 x 1700 mm - Weight: approx. 2200 kg

Condition: used, Functionality: fully functional, Heraeus Suntest CPS Accelerated Light Fastness Tester. This tabletop accelerated light fastness tester of the brand Heraeus type Suntest CPS is used for exposure and weathering of material samples. This method provides essential information on the long term response of products and materials to climatic conditions, in particular solar radiation.This Suntest CPS is suitable instrument for routine testing during production, for inspection of incoming goods or for screening new materials before production of finished goods. Good working condition. Please check out our other listings as well. Fobswc Syne E Az Rgspg

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Equipment: type plate available, Fast precision coordinate measuring machine and gear measuring center. Moving gantry with patented TRICISION™ technology X 900 / Y 1500 / Z 700 B5 control system (retrofit 2021) High-resolution Leitz LSP-S2 3D measuring head Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm 8-position probe change system Large package with probe accessories Fpebsv S Dk Ej E Az Rgog PCDMIS CAD++ 2024 software 12-month warranty Computer, 32" screen Installation, commissioning, and acceptance according to DIN EN ISO 10360-2, 4, and 5

Condition: excellent (used), White Type: WKL 100/70 Air-cooled with humidity -70 to 180°C Test chamber capacity approx. 100 liters Weight 210 kg Internal dimensions: Height 400 mm Width 470 mm Depth 345 mm External dimensions: Height 1776 mm Width 745 mm Depth 980 mm Data for mechanical stress: Maximum load on the test chamber floor 10 kg 10 kg per grate insert Total load on the grate supports 50 kg Data for operation: Test chamber lighting halogen bulb 24V, 50W Nominal voltage 1/N / PE AC 230 V ± 10% 50 Hz Nominal power 3.5 kW Nominal current 15.2 A Fuse provided by the customer 16A slow-blow Protection class Control cabinet IP 22 and control panel IP 54 Heat emission air-cooled test cabinets: Max. heat emission to the environment 2500 W Noise measurement Sound pressure level free field measurement at a distance of 2 m from the front and 1.0 m high approx. 59 dB(A) Characteristics for temperature tests Temperature range -70 to +180°C Temperature differences in steady state Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 1 K Temperature deviation spatially ± 1 to ± 2 K Temperature change rate Heating 3.5 K/min Cooling 3.5 K/min Heat compensation max. 700 W Characteristics for climate tests Data for humidification system Contents of the storage tank approx. 13 l Water quality Demineralized pH value 6 – 7 Conductivity max. 20 μS/cm Water consumption at constant temperature +40 °C, 92 %RH 2 l / 24 h Temperature range +10 to +95 °C Humidity range 10 to 98 %RH Temperature and humidity differences (in steady state) Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Humidity fluctuation over time in the middle of the usable space ± 1 to ± 3 %RH Flow through 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R 23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Fpeb Eevpgnus Az Rgjg Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop Fpsb E Azorr Amme Rgog

Condition: excellent (used), Bosch starter service life test The machine is a Bosch in-house production. It is used to check the service life or durability of starters (also starter motors) of engines. Fjb E Aog Ith Roz Rgepg Manufacturer: Bosch Type: Machine for testing the service life of starters Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, ID 512 127-15 SN 64 284 081 HEIDENHAIN rotary encoders are used in industrial applications to measure the Fpeb E Asn Stacjz Rgog motion and position of axes in machines, robots, machine tools, and other other automated systems.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: SVW1780, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 102 mm, Equipment: type plate available, The SmartScope Flash 200 coordinate measuring machine from OGP Inc. (Rochester NY, USA) is sold as a fully functional unit comprising a measuring machine, measuring license, measuring computer, monitor, connecting cables, keyboard and mouse. The coordinate measuring machine was operated indoors under laboratory conditions and is in a well-maintained, perfect condition. All devices were operated on the 220-230V~ power grid. Fobsvzxgas E Az Rgopg Additional information on the specification: - Measuring machine: OGP Smart Scope Flash 200. Electrical specification 220V~1 50/60Hz 3.1A, 500Watt. Calibration last 06/2024 (Result: "The determined values of the length measurement deviation E according to VDI/VDE 2617-6 are within the specified limit values, taking into account the standard DIN/ISO 14253-1 (2018 edition)") - Software: MeasureX 5, installed and licensed with dongle - Measuring computer: PC Intel i5, Windows XP Service Pack 3 - Monitor: LCD monitor

Condition: excellent (used), Offered here is a "Large Oversight - Camera Microscope" from the company Zeiss of the type NEOPHOT 32. The camera microscope is in a very good condition and has several accessories. Technical data: Device dimensions: 1400mm x 800mm x 1200mm (W x D x H) Weight: 225kg Mains voltages: 100 V; 110 V; 127 V; 220 V; (factory setting) 240 V Mains frequencies: 50 Hz; 60 Hz Power consumption: 500 VA Application class: +10/+35/30/75 001.0 according to TGL 9200/03 Object focusing/ fast stroke Large drive: (45 ± 1)mm with stop for objectives with tuning length 45mm

 Fine drive: 4mm, scaling in 1µm intervals Fast stroke: approx. 45mm Stage load capacity: specimen mass ≤ 5kg. Cross stage (20x20mm): Coordinate movement 20x20mm with position indicator; 0.1mm scale. Rotation 360°, centerable; Nonien reading. Adjustable 45° detent Table insertion covers: 
 outer-ø 56mm :10, 20, 27mm inner-ø. 
outer-ø 96mm :32, 40mm inner-ø Cross table (50x50mm): Coordinate movement 50x50mm with nonien reading of table position, rotary insert. Table insertion covers: 

outer-ø 56mm :10, 20, 27mm inner-ø outer-ø 96mm :32, 40mm inner-ø outer-ø 132mm :50, 70, 90mm inner-ø nosepiece: M 30/5 EZ Fjb E Asg Umuwoz Rgepg Tube systems: 8x; 10x; 12,5x; 16x(15x); 20x (each product of tube factor and eyepiece magnification) Projections: 6,3 : 1; 10 : 1 Magnification range 10x... 2000x (range adjustable) Imaging scales 6.3 : 1 ... 2000 : 1 Photo material formats: 9cm x 12cm as well as formats of the cassettes and film holders that can be placed on the international back.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Scope of supply: 1x MultiTest 2.5-dV from Mecmesin (traversing tower; see appendix "MulitTest-dv-VectorPro-Lite-L00") Fpjb Esv Sp R Dj Az Rgjg 2x load cells, each with a capacity of 500 N (Cal. No. 1266M and Cal. No. 1270M), including a carrying case 1x enclosure with Plexiglas and a magnetic sliding door 1x documentation Connections: 220 V Year of manufacture: 2018 Software: Vector Pro 8.3.0.0

Condition: like new (used), Functionality: fully functional, SP25M/SP25-1 Fpobswc S D To E Az Rgeg

Condition: good (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, outer dimension length: 1,765 mm, outer dimension width: 1,700 mm, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm Fsb E Azevvudkj Rgjpg • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: like new (used), Functionality: fully functional, measuring range X-axis: 270 mm, measuring range Z-axis: 380 mm, - basic housing SK50 Fjb E Az Rowbz Aisgopg - CMOS color camera with a resolution of 1280 x 1024 Pixel - control via color 12.1" touch screen, keyboard or mouse - simple and fast one-handed operation in both axes simultaneously - high runout accuracy in Z 300 mm ≤ 0.005 mm - repeatability 0.003 mm - USB, RS 232, x Ethernet RJ-45 - image processing functions - manual and automatic measurement - automatic edge detection - quick and easy calibration - automatic light adjustment - reduction - adjustment mandrel - label printer

Condition: good (used), Year of construction: 2014, Machine Type: 3D CNC Coordinate Measuring Machine (CMM) Brand: Werth Model: ScopeCheck 400/400/300/FB/Z Year of Manufacture: 2014 Measuring Range X-axis: 400 mm Measuring Range Y-axis: 400 mm Measuring Range Z-axis: 300 mm Machine Design: Fixed Bridge (FB) with motorized Z-axis (Z) Sensors: Multi-sensor system – Optical and Touch Probe capable Optical System: High-resolution camera with telecentric or zoom optics Measurement Type: Non-contact and contact (hybrid capability) Control System: CNC-controlled in all 3 axes Software: Werth WinWerth® Accuracy: Micron-level precision (depends on configuration) Applications: Dimensional inspection, quality control, reverse engineering Fpob E Aev R Uzlsz Rgsg Industries: Aerospace, automotive, medical, precision engineering Power Supply: 230V / 50Hz (typical) Weight: Approx. 1000 kg (depending on configuration)

Year of construction: 2010, Condition: excellent (used), Werth Scope Check 400 multi-sensor coordinate measuring machine Fjb E Az Renk U E Ajgjpg Year of manufacture: 2010 X-axis: 400 mm Y-axis: 200 mm Z-axis: 200 mm Max. Measuring piece weight: 20 kg Max. Measuring piece height: 200 mm No responsibility is taken for the correctness, completeness and topicality of the information.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, total height: 1,162 mm, total width: 752 mm, total length: 567 mm, overall weight: 192 kg, replaces conventional profile inspection projectors for fast, accurate and reliable measurement of a wide range of flat samples in manufacturing environments. Measurement of profiles (i.e. rubber, plastic and aluminium), thin films, printed circuit boards (PCBs), laser-cut and fine-pressed parts, etc. Fpob Eowbzx De Az Rgsg