Condition: used, Vötsch Model: VC 0018 Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Performance data for temperature tests: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 0.6 K/min. Cooling: 0.3 K/min. Gjdpfx Aew Swrtjg Nouh Heat compensation in the range +20 °C to +50 °C: 200 W Calibration values: +4 °C and +90 °C Performance data for climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Rated current: 9.5 A (Neutral conductor plug: loaded) Schuko approx. connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R-134A Buyer Information for Your Safety! The following procedures are carried out on our climate chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Technical specifications and information subject to change and errors! Feel free to call us with any further questions.

Condition: good (used), Digital display, length measuring system, linear scale, length measuring device, positioning display, digital scale, built-in digital display Gsdpfx Ajw Stibog Nsuh -Manufacturer: RSF Elektronik, digital display from coordinate measuring machine Stiefelmayer C 100 413514 -Type: Z 735M -Dimensions: 275/120/H170 mm -Weight: 3.4 kg

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Guodpjglp Nqjfx Ag Njh Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: good (used), functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, Optical Multisensor Measuring Machine HEXAGON OPTIV CLASSIC 321 GL tp Excellent condition, available for inspection at a specialist company for industrial metrology – commissioning, calibration etc. can be arranged upon request! - Year of manufacture: According to Hexagon, likely 2015 - Machine number: 7F001-7 - Condition: Good - Delivery terms: Loaded free on truck (unpacked) - Location: 66127 Saarbrücken - Availability: Immediately (subject to agreement) - Payment terms: Advance payment by bank transfer - Internal No.: OCU Available for inspection under power: YES Technical data: - Metrology software: PC-DMIS Vision - Vision sensor for non-contact measurement of very small and precise components - CCD camera with 6.5x motorized CNC zoom - DC servo motors - Modular probe changer: TESASTAR - Linear guides on all axes - Coaxial LED top light (white LED) - LED backlight (green LED + diffuser disc) - Multi-segment LED ring light - Maximum feed rate in X, Y, Z axes: 160 mm/s - Maximum workpiece weight: 20 kg - Measuring resolution: 0.05 µm - Measuring accuracy in X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm - Measuring accuracy in XY axis (optical sensor): Exy = (2.0 + L/250) µm - Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm - Measuring accuracy in X, Y axis (tactile probe system): Ex, Ey = (2.0 + L/250) µm - Measuring accuracy in XY axis (tactile probe system): Exy = (2.5 + L/250) µm - Measuring accuracy in Z axis (tactile probe system): Ez = (2.9 + L/200) µm - Measuring range (optical sensor) X 300mm Y 200mm Z 150mm - Measuring range (tactile sensor) X 230mm Y 200mm Z 150mm Scope of delivery: - PC including measurement software PC-DMIS Vision - Documentation / manuals - Clamping devices / stops for workpieces to be measured Probes: - 3 x stylus holder HP-TM-SF - 1 x stylus holder HP-TM LF Guodpfx Asxfagrsg Njh - 2 x stylus Ø1 x 10 - 2 x stylus Ø2 x 12 - 1 x stylus Ø3 x 20 - 2 x stylus Ø1.5 x 20 - 1 x stylus Ø2 x 20 - 1 x stylus Ø2 x 10 - 1 x stylus Ø3 x 10 - 1 x disc stylus Ø6 x 1.2 x 10 - 3 x extension Ø3 x 10 - 1 x extension Ø3 x 20 - 1 x angle piece (individually adjustable) - 1 x stylus rack for holding 4 styli Dimensions & weight: - Installation dimensions (L x W x H) approx.: 705 x 986 x 890 mm - Weight approx.: 170 kg ℹ️ If you have any questions or wish to arrange an inspection, please contact us. ⚠️ Additional notes: ► The goods are sold under exclusion of any warranty ► Technical data subject to change ► Prior sale reserved ❗ Sale to businesses only ❗

Condition: good (used), Hommel roughness tester type T1000 Gujdpfjvdwlgox Ag Nsh

Year of construction: 1983, condition: used, weight 100 kg 2 Stück height 700 mm Guedpfx Aew Sygyjg Neh

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Gusdpfjw Strcsx Ag Njh Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, The device is less than one year old. Sale is from the current location, transportation must be arranged by the buyer. Sale excludes any form of warranty and is only to commercial buyers. The purchasing company must sign a purchase contract and provide proof of its beneficial owners; the authorized signatory must complete Postident verification. Guedpoxckv Sefx Ag Nsh

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Gjdpfxjwcxb Se Ag Nsuh Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices against bid XG x 2800 5x Ca E200L 4x CA Dc 40 e System was only used for 90 days as good as new The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series from KEYENCE Germany. This advanced vision system offers advanced features and flexibility for demanding inspection applications. Here is some important information about the XG-X2800LJ: Technical specifications: Laser scanner / profile measurement: the XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line scan cameras, LJ-V sensors and 21 megapixel cameras12. Flowchart style programming: The XG-X is designed for advanced users and allows flowchart style programming3. Manuals and software: User manuals and software are available for configuration and customization via PC as well as remote control and capture of images and results on a PC4. Godpfxer Rddze Ag Nsuh Please note that the accessories shown are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website.1 If you have any further questions or need support, please do not hesitate to contact me! 😊

Condition: used, Year of construction: 1995, operating hours: 38,000 h, functionality: limited functionality, machine/vehicle number: PNC 35 / Serien-Nr.: B5307, Software version: Klingelnberg / V3.2.3 Guodsxgm Tbspfx Ag Nsh Software options: Gina spur gear (Win) + da/df extension + cylindrical worms (Basic) + Gina hobbing option (Win) + spur gear (Basic) + Gina hobbing option (Win) PC equipment: XP_64bit system / 1x 19" monitor Probing system: Rigid probing system / probe sensor M43m The machine has not been in operation since 2021 and can be inspected at our facility upon request. The machine has been stored with transport securing measures in place.

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Guodjxantcopfx Ag Neh Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition

Year of construction: 2020, condition: like new (used), With autom. feed + discharge Guedslpcm Ropfx Ag Nsh Workpieces are fed in as bulk material, inspected, bad parts are sorted out and good parts are transferred to containers as bulk material. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - line scan camera (4K), surface inspection parts bunker SKAKO, 71 l volume up to 125 kg storage New price: € 230.000,-.

Condition: excellent (used), CTS Type: TS-70/1150-10 CTS Temperature Test Chamber, Water-Cooled Control: 32-bit Controller LCD Operating Panel Digital Display of Set and Actual Values Numerical Input of Set Points Error Messages in Plain Text Gujdpfx Asw R Tunsg Neh RS 232 Interface Ethernet Interface Free control channels for customer-side DUT (device under test) actuation Operation: capacitive touch display & PC-based control (USB/Ethernet) Test Chamber Dimensions: Height approx. 1250 mm / Width approx. 1000 mm / Depth approx. 920 mm External Dimensions: Height approx. 2000 mm / Width approx. 1800 mm / Depth approx. 1600 mm Temperature Testing: Temperature Range: -70°C to +180°C Temperature Deviation: ≤ ±0.5 K over time Temperature Change Rate according to IEC 60068-3-5 Heating: 10 K/min Cooling: 10 K/min Thermal Load: approx. 5000 W at -20°C Technical data refer to an ambient temperature of +25°C Test Volume (interior): approx. 1150 liters Operating Data: Electrical Connection Nominal Voltage: 400V 3/N 50Hz Power: 27.6 kW Nominal Current: 47.5 A Refrigeration System: Two-stage R404A (17.8 kg) + R23 (5.4 kg) Weight: approx. 1500 kg The following steps are completed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Gujdpfx Asd Ambtsg Njh Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Guedpfxemza Ile Ag Nsh Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Condition: ready for operation (used), ZEISS Rondcom 54 Form Measuring Instrument – Surface and Contour Measuring Device Max. Measuring Diameter (OD): approx. 300 mm Max. Workpiece Diameter: approx. 580 mm (depending on configuration) Max. Workpiece Load: approx. 30 kg Rotational Axis (C-axis) – Radial Roundness: 0.020 + 6 H / 10,000 µm (tolerance) Axial Runout: 0.020 + 4 R / 10,000 µm Measuring Speed (Rotation): approx. 2 – 10 rpm Centering Range: ± 2 mm Leveling / Tilting Range: ± 1° Resolution (Rotary Axis): 0.025° Gjdpfx Agoxhd E Ds Njuh Z-Axis (Vertical Travel): 300 mm (optionally expandable to 500 mm) Straightness Deviation Z-Axis: 0.12 µm / 100 mm, 0.20 µm / 300 mm Parallelism Deviation (relative to rotary axis): 0.8 µm / 300 mm R-Axis (Radial Movement) – Travel: 170 mm Straightness Deviation R-Axis: 0.8 µm / 150 mm Parallelism Deviation (C vs. R): 1 µm / 150 mm Linear Scale (on R-Axis): Yes, available as standard (for higher accuracy) Measuring Force (stylus / probe): adjustable, 30 – 100 mN Measuring Range (probe): ± 1000 µm (adjustable) Detector Resolution: up to 0.001 µm (1 nm) Standard Stylus: Length L = 54 mm, Ball Ø = 1.6 mm carbide Power Supply: 100 – 240 V AC, 50/60 Hz Power Consumption: approx. 600 VA Compressed Air Requirement: 0.3 – 0.7 MPa Weight (approx.): approx. 170 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Export customers can be issued a net invoice, provided a valid VAT ID number is supplied. Sale subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in item descriptions are subject to change.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Gusdpfx Aoxanrxog Njh Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, TECHNICAL DETAILS Model: WP690E Gusdpfx Agoxann Hs Njh Resolution: 9 MP tristimulus Detector: thermoelectrically cooled CCD detector A/D converter: 16-bit Lens control: electronic Software: Perpetual Photometrica license Support: 1 year software support Warranty: 2 years hardware warranty Original price: €29,097.00 Lens Type: LS-35-2.0-EF Focal length: 35 mm Mount: EF-Mount Functions: electronically controlled aperture and focus Calibration: at apertures F2.8, F5.6, and F11 at focus distances 25 cm, 50 cm, 75 cm, 100 cm Original price: €3,588.00 Software package Name: Display Test Package Function: plug-in for comprehensive display testing Original price: €3,240.00 EQUIPMENT - Photometrica perpetual software license - Display Test Package software - LS-35-2.0-EF 35 mm EF-Mount lens

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Gedpfew R Rt Iex Ag Njuh Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: refurbished (used), Year of construction: 2015, operating hours: 250 h, In the client's order: 3D coordinate measuring machine Hexagon Optiv 432 used multi-sensor CMM with camera, push button • Measuring range single sensor: 400x300x200mm • Dimensions: 1232x910x1663mm Mufjyo • Weight: about 940kg • Max. Workpiece weight: glass plate approx. 30kg Gujdpfxedy Hlhe Ag Noh • Accuracy: MPEE = 2.9 + L / 100 [? M] • built in 2014 • Software: Vision3D with option on Opticheck3D • incl. Camera with CNC zoom • incl. 6-fold button changer • Including switching push-buttons HP-TM • incl. LED ring light • incl. Calibration standard • incl. 2-monitor operation • incl. New Windows 7 Ultimate evaluation station • incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE OF THE MANUFACTURER (All rights reserved by Hexagon Metrology)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Gedpfxjmx Sl Tj Ag Njuh The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: good (used), Climatic Test Chamber +10°C to +90°C, Air-Cooled Godpfjxbnkwjx Ag Nouh The test chamber is designed and built for climatic testing within its operating range. Test procedures that determine the influence of temperature and humidity on material properties and functional reliability of the test specimen can be performed. The test chamber can be operated in manual mode (fixed-value mode) or automatic mode. The EDIT program can be used to program extensive climatic tests and save a maximum of 99 test programs. These test programs are run in automatic mode. The test chamber can be controlled during operation via the RS 232 interface with a computer and the TSI software or in ASCII mode. The operating temperature limiter protects the test specimen from excessively high temperatures. To protect the test specimen, the upper and lower temperature limits can also be set on the terminal. Manufacturer: Heraeus Vötsch Type: VC 0033 Specifications for temperature tests: Temperature range: +10°C to +90°C Humidity range: 30 - 95% Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 2.7 kW Rated current: 12 A Refrigerant: R 404A Test chamber volume: approx. 333 liters Humidity range: Humidity range for normal operation (ranges 1 and 3) with a dew point limitation of +5°C Humidity range 3 is omitted if additionally equipped with a capacitive humidity measurement system Tolerances for standard climate conditions 23°C/65% RH Temperature ±0.1 K Humidity < ±1.5% 85°C / 85% RH Temperature ±0.1 K Humidity

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: GLOD001468IA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,200 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 3,406 mm, total width: 1,838 mm, total length: 3,580 mm, overall weight: 5,679 kg, input voltage: 24 V, A rare opportunity to acquire an almost brand new, Hexagon Global 12-22-10. With a 1200mm x 2200mm x 1000mm measuring range. This machine is a 2010 model year and presented in immaculate condition. It comes with a Tip Changer rack, 5 degree Hexagon Probehead and with both tactile and the X1 scanning probe. Powered by the powerful RC1 controller and with the running the latest version of PC-DMIS CAD++ this machine is one not to be missed. Includes 12 months warranty but is only available to the UK. Please not the price quoted only allows for Euro or Dollars but we only accept GBP £72,995.00+vat Gusdjqxtaxopfx Ag Nsh

Condition: excellent (used), Here we offer you an Erichsen condensation tester. Erichsen condensation water tester HYGROTHERM 529 / 1000 liter incl. control unit and compressed air connection Condensation water tester for standard-compliant condensation water tests HYGROTHERM 529 Purpose and application: The HYGROTHERM 529 condensation water tester is used to test the corrosion susceptibility and climatic behavior of materials and connections according to various standards and and specifications, such as the behavior of protective-treated carrier materials in a constant condensation water climate in accordance with DIN EN ISO 6270-2-CH. The HYGROTHERM 529 condensation water tester is available with a test chamber volume of 1000 liters. The device consists of a control unit (with test hour counter and temperature controller) for wall mounting and a separate double-walled test chamber in rectangular design with rectangular design with pneumatic dome opening. Technical data: Dimensions and weight Control unit Width: 425 mm x height: 530 mm x depth: 200 mm Net weight approx. 20 kg Test chamber 1000 liter (rectangular design) Width: 1800 mm x height: 1350 mm x depth: 1000 mm Internal dimensions. Width: 1500 mm x height: 670 mm x depth: 810 mm Data: Power supply 230/ 400 V three-phase current, 3〜, 50 Hz Net weight: Control unit approx. 20 kg Test chamber 1000 liters approx. 150 kg Gjdpfx Ajqbtchog Neuh Power consumption: Control unit: approx. 120 VA Test chamber 1000 liters approx. 2000 VA Heat output of control unit: Test chamber 1000 liters approx. 2400 W Compressed air connection: R 3/8 internal thread 6-8 bar overpressure Type: HYGROTHERM 529 Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.