Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Gsdpsxmlgtsfx Ag Neuh Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Vertical measuring range Z = 50mm Gusdpfovun Tpox Ag Nsh Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: used, Measuring system for radiation measurement. Measurement of radioactivity. The stated price is for both devices together. Inspection is possible by appointment at my warehouse! Shipping via freight forwarder is also possible! Guodpfxjpcfz Ne Ag Noh

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) External dimensions: Godswaypfopfx Ag Nsuh H x W x D 1922 x 800 x 893 mm Weight: 324 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2006, 1 x Profile Projector Tesa Scope 300 V Year of manufacture: 2006 Technical Data: Screen diameter: 300 mm Magnification: 10x + 20x Travel paths: X: 200 mm Y: 100 mm Resolution: 0.001 mm Further technical data to follow. Guodpfxjxl Ulio Ag Noh The projector can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2021, ★ TOP maintained machine from the liquidation of a renowned toolmaker – be sure to check our other listings as well ★ ❗Balancing system for tool holders SK 40 & HSK-A63, grinding wheels, and rotors HAIMER TD 1002❗ Guodpfxjxl Tw Ds Ag Neh Year of manufacture: 2021 Machine number: 13214203 Condition: Used Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – Items must be collected by the buyer during week 49 / 2025 without exception. The exact date will be specified by us. Earlier collection may be possible by arrangement. Payment terms: Advance payment – bank transfer Internal number: JO15 Technical data (without guarantee): - Adapter for SK 40 & HSK-A63 tool holders - Spindle speed: 600 – 1100 rpm - Measuring accuracy: < 1.0 gmm - Power supply: 230 / 50–60 V / Hz - Power: 0.4 kW - Compressed air: 6 bar - Max. tool length: 360 mm - Max. tool diameter: Ø 340 mm - Max. tool weight: 15 kg - Further technical data – see images Scope of delivery: - Available manuals - Adapter for SK 40 & HSK-A63 tool holders Dimensions & weights: - Installation dimensions (L x W x H): approx. 1000 x 1000 x 1500 mm - Weight: approx. 220 kg If you have any questions or wish to arrange a viewing, please do not hesitate to contact us. ⚠️Be sure to check our other listings as well⚠️ Additional notes: - We explicitly recommend collection by direct transport (freight forwarding) - The goods are sold excluding any warranty - Technical data provided without guarantee - Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: new, Year of construction: 2008, Suitable for measuring and presetting all types of cutting tools as well as for measuring grinding wheel packages. The extensive and comprehensive software solution with intuitive graphical user guidance guides users quickly and safely to precise measurement results. Accessories: Upgrade to ZOLLER measuring device control »pilot 4.0« with 17” monitor, Autofocus/venturion 800, Gsdpfx Agjv Sauts Neuh Rotary encoder (ROD=) for high-precision position determination, Tool inspection (incident image processing with centered LED lighting), High-precision spindle “ACE” concentricity 0.002 mm, Tool management standard, FORED 'manual measuring programs, 3 used attachment holders. Z-axis travel: 800 mm X axis travel: 200 mm Workpiece diameter: Max. 1000 mm workpiece length: Max. 800 mm Max. snap gauge diameter: d = 200mm Workpiece holder: SK 50 Tool weight: max. 10 kg Repeatability: +/- 0.002 mm, Display accuracy: 0.001 mm Concentricity: 0,005 mm Connected load: 230 V / 50 Hz Compressed air connection: approx. 6 bar Dimensions W x D x H: 1550 x 800 x 2200 mm plus control panel mass: about 600 kg colour: silver grey / anthracite

Condition: like new (used), functionality: fully functional, Equipment: documentation/manual, Measuring system fully functional. Hardly used. Godpfx Aow Siyceg Neuh

Condition: reconditioned (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, input voltage: 230 V, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, On behalf of the customer: 3D coordinate measuring machine Hexagon Optiv443 used multi-sensor CMM with camera, probe Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! • Measuring range of individual sensor: 400x400x300mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. workpiece weight: glass plate approx. 30kg Mufjyo • Accuracy: MPEE = 2.9 + L/100 [?m] • Year of manufacture 2014 • Software: Vision3D with option for Opticheck3D • Incl. camera with CNC zoom • Incl. 6-way probe changer Guodpfx Aed Ah Nxsg Nsh • Incl. switching probe HP-TM • Incl. LED ring light • Incl. calibration standard • Incl. 2-monitor operation • Incl. new Windows 10 Professional evaluation station • Incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE (sister machine)

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Gsdpfxjw U N Rts Ag Nsuh Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2019, High-precision, non-contact dimensional inspection system designed for shop-floor use. Ideal for measuring molded, turned, punched, or milled components with speed and accuracy. Features automated measurement routines, intuitive software interface, and comprehensive reporting tools. Robust construction ensures reliable performance in industrial environments. Perfect for quality control and production optimization. Gjdpfx Aexnlypjg Njuh Machine has scratches on the measuring glass

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Gsdpsxl Rgisfx Ag Nsuh

Condition: ready for operation (used), A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Gujdexhnr Uspfx Ag Noh

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Gujdpfsxcivqsx Ag Njh Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Due to a project completion, we are selling our Hexagon Absolut Arm for 3D measurement, including accessories. Advantages of this measuring arm include: lightweight and mobile for high-precision measurements, no warm-up required, no encoder. Switch on, unlock, and start measuring immediately—even without trained measurement technicians! Probes and scanners can be changed during the measuring process without re-alignment. The measuring arm is robustly protected (IP54 certification). Gsdpfx Asxfqlleg Neuh

Condition: excellent (used), CTS Type: TS-70/350-10 CTS Temperature Test Chamber TS-70/350-10, water-cooled Temperature Testing: Temperature range: –70 °C to +180 °C Temperature deviation (over time): ≤ ±0.3 K Temperature change rate (according to IEC 60068-3-5): Heating: 10 K/min Cooling: 10 K/min Heat dissipation: approx. 5000 W at +20 °C approx. 5000 W at 0 °C approx. 3200 W at –40 °C Conditions for the specified values: Ambient temperature: +25 °C Rated voltage: 400 V Without test specimen No external heat source Without additional equipment Dimensions/Volume: Test chamber volume: 350 liters Internal dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 16.6 kW, Rated current: 25.7 A Refrigerant: R404A / R23 Weight: approx. 750 kg Important information for you as the buyer! The following points are carried out on our chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) Gjdpfx Aew U A Rteg Neuh (Subject to technical changes and errors; information is subject to confirmation!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Gsdoxl Rf Sopfx Ag Nouh

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Gedpfjxhntlex Ag Nsuh

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Guedpfx Aeuqgbyeg Neh Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone. Gsdpsw U Awmsfx Ag Neuh

Condition: excellent (used), Digital external micrometer by the renowned brand Mahr Micromar 40 EWR. Measuring range 25–50 mm with an accuracy of 0.001 mm. LCD display with ZERO, ABS, REL, and TOL functions. IP65 protection rating – dustproof and splash-resistant. Set includes gauge standard, key, documentation, and original case. Technical and visual condition very good. Gedpfoxl Hqdex Ag Neuh

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Gsdpfxow Uifde Ag Njuh Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: Gusdjxl Dbtjpfx Ag Noh • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z0.05 Type: BT1-FRO.5TS.D14 with testXpert II V3.0 software Zwick/Roell zwicki Z0.5 TS Materials Testing Machine 0.5 kN Professional materials testing machine for tensile, compression, flexure, and component testing. Gujdpfxsw Uf Uzs Ag Njh Fully equipped with testControl electronics, testXpert II software, accessories, and PC workstation. Technical specifications of the testing device Model: zwicki Z0.5 TS Rated force: 0.5 kN (500 N) Max. test space height: 573 mm Test speed: 0.001 – 2000 mm/min (optionally up to 3000 mm/min) Online machine compliance correction for maximum accuracy Adaptive controller for force and strain control High precision and real-time data processing Modular expandability: 2 module slots (optionally up to 4) Clamping range flexibly adjustable Xforce P force transducer Type: Precision Rated force: 500 N Accuracy class 1 as per ISO 7500-1 from 2 N Accuracy class 0.5 from 10 N Insensitive to lateral forces, bending/torsion moments Rugged design, overloadable up to 150% of rated force Incl. calibration certificate according to ISO 7500-1 Software – testXpert II Includes basic program in German Easy operation on Windows XP/Vista (compatible with standard PCs) Integrated simulation mode (Virtual Testing Machine) Statistical analysis & tolerance monitoring Accessories Unit for tack-loop test Fmax 500 N Fixture for adhesive tapes Glass plate 25 x 30 mm (FINAT Test No. 9) incl. mount Screw specimen holder Type GRS500 PL Fmax 500 N Max. opening width 21 mm Incl. Vulkollan jaws, Ø 32 mm PC & Workstation HP DC7800 Midi Tower incl. Windows XP Pro (German) Intel Core 2 Duo E6750, 2 GB RAM, 160 GB HDD DVD drive, Gigabit Ethernet, multiple USB/serial ports 19" LCD monitor (1280 x 1024), keyboard & mouse testXpert II software preinstalled Dimensions (W x D x H): approx. 450 × 450 × 1200 mm Weight: approx. 60 kg (without PC and accessories) Condition: used Scope of delivery: (see image) Zwick/Roell zwicki Z0.5 TS materials testing machine (0.5 kN) Xforce P force transducer (500 N, incl. calibration certificate) testXpert II software (basic program, German) Accessories: tack-loop test unit, glass plate with mount, screw specimen holder GRS500 PL PC workstation with monitor, keyboard, and mouse Documentation in German (Specifications and details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Godpsw Udv Rjfx Ag Nouh Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Control panel Swivel office chair Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Further questions can gladly be answered by phone.